Waste Shredder

Product Details:

Item Code: JKA-230MSW  A trommel machine in Municipal Solid Waste (MSW) management is a cylindrical, rotating drum equipped with perforated screens. It efficiently sorts and classifies waste materials by size, allowing for the separation of recyclables, organics, and larger items from the waste stream. Trommel machines are essential tools for optimizing MSW handling and promoting sustainable waste management practices.

The need of trommel machines in Municipal Solid Waste (MSW) management is indispensable due to the complex and diverse nature of urban waste. These machines play a critical role in several aspects of MSW handling and processing. Trommel machines are also crucial for preparing waste for further processing. Once materials are separated and contaminants removed, they can be more easily processed into secondary products. This includes shredding or compacting materials for recycling or converting organic matter into compost, which can be used to enrich soil in agriculture and landscaping. The need for trommel machines in MSW management lies in their ability to streamline waste handling, enhance recycling efforts, reduce landfill waste, and prepare materials for further processing. By aiding in the separation and classification of waste, these machines contribute to more sustainable and environmentally friendly waste management practices, promoting resource recovery and waste reduction.

Operation

Feeding Hopper Unit: Municipal Solid Waste is feed into the machine through an in feed hopper.

This is where waste is initially loaded onto the trommel for processing.

Feed Conveyors: A conveyor system transports the waste materials onto the trommel screen. This system ensures a consistent and steady flow of waste into the machine.

Trommel Screen: Trommel screen is installed in a small angle with the input end a little higher than the output end. Material fed into the trommel screen is lifted up by the rotation and aerated as it falls back down.

This action is repeated with each revolution along the length of the drum. The smaller fractions pass through the screen openings while the larger fractions tumble towards its eventual exit at the rear of the drum.

Process Conveyor: Smaller particles like fines and smaller recyclables, fall through the holes from the Trommel drum and are usually directed in process conveyor.

Reject Conveyor: After materials are separated by the trommel, they are directed towards specific discharge conveyor belts.

These Conveyor guide the materials to their respective sorting or processing areas.

Control Panel: A control panel allows operators to manage and monitor the machine's operation.

It includes controls for the motor, speed settings, and other operational parameters.

 

Basic Features

Simple and mechanically more robust.

Product Details:

Item code: JKA-230PS 

Plastic Waste Shredder is the advanced recycling technology, composting, that has undergonenumerous is based on natural biodegradation. For this reason, composting is used forprocessing waste with organic origin. Plastic is used and become waste; recycling process isapplied to return it to a usable product. Plastic waste shredder is recycling process that needsto have the right skill and equipment in order to perform.Any plastic waste or scrap has to undergo the following steps to be considered for recycling:
Step 1: Sorting/Separation - Plastics are many different types and it must be separated intodifferent types, plastic needs to be sorted after collection.
Step 2: Shredding - Once all the plastics are shorted from the waste plastic, the next stepinvolves shredded them into pieces. Shredding is done by a variety of tools and equipment thatis able to breakdown the waste plastic into small pellets.
Step 3: Extruding - The final stage is melting the plastic pellets on basic temperature whichhave been tested and approved. This is a process that involves a lot of energy consumption andmust be done using specific equipment. After completion of this process the plastic can berecycled and used to manufacture other products.
SPECIFICATION:
• All steel construction• conveyor hopper• 3/4 HP conveyor motor | 5 HP crushing motor• External tail-pulley adjustment• steel casters
FEATURES:
Solid body structure and casingLow noise level

• Heavy duty gear
• Maintenance gear
• Unit is protected against overloads and
• equipped with fuses
• Auto reverse features with PLC control
• (optional)
• Pneumatic feed control (optional)
• Low budget machine

AVAILABLE LOADING CAPACITY: 5/10/20/25/50/150/200/250/500 Kg.
** Note:-The content of the product and specification are subject to change without prior notice for continuous improvement.

APPLICATION:

• Finishing & Producing Industry
• Hospitals/Nursing homes
• Bio Medical Waste
• Laboratories
• Catering Industry
• Supermarkets
• Municipal Authorities
• Pharmaceutical Industry
• Plastic Industry
• Card Board Industry

Additional Information:

• Item Code: JKA-230PS
• Production Capacity: 10
• Delivery Time: 01-02 WEEKS

Product Details:

CODE: JKA-230S-1 Technological advancements combined with depleting supplies of natural resources have made it now less expensive to reclaim useful materials from used products than to harvest raw materials from the earth. Items such as used water and soda bottles can be converted into textiles and carpet. Old, worn out car tires can be converted into mats, sports surfacing and roadways. Obsolete electronics and children's toys can be shredded, processed in an automated recovery system, and converted into materials that are used to make similar products over and over again.

·         Shredding is more than just a way to downsize waste for disposal. It is the first step in almost any recycling or material reclamation process. It is one way to help sustain our planet and way of life.

·         The twin shaft shredders are versatile shredders designed for shredding many types of bulky material in the primary stage. The shredders are extremely rugged and have a strong support structure to withstand all loads. "SHREDDERS" are available in a wide range of electrical and hydraulic drive configuration.

·         The housing is solid construction, bolted together. The bearing unit is separate and properly sealed to avoid damage from liquid and solid material, thereby increasing its life. The shredders have low speed, high torque, low noise, low dust and low maintenance. The blades are made from special hardened steel and are easily replaceable. The design of the blades varies according to the material being shredded. Higher capacity shredders are provided with two gear box system ensuring constant torque on both shafts. The shafts are counter rotating and hexagonal in design ensuring excellent griping of the blades.

·         The twin shaft shredders are used for shredding of Medical Waste, Municipal Solid Waste, Wood, Tyres, Plastic, E-waste, Packing material, textile, Drum, Metals, oversize bulky waste, industrial waste, General Waste, Hazardous Waste, end of life equipment and other difficult to shred items.

APPLICATIONS:

·         Wood.

·         Ceramic.

·         Bulky solid wastes.

·         Plastic wastes.

·         Metal.

·         Industrial Paper/Mill waste.

·         Electronic scrap.

·         Construction debris.

CONVEYOR SPECIFICATION:

·         Construction of Conveyor M.S.

·         Construction of Belt PU PVC.

·         Width of the belt 10" to 20".

·         Length of the Conveyor 4 feet to 20 feet.

·         Speed variable 0-60rpm.

·         0.5 to 3HP conveyor motor (ABB/CROMPTON/SIEMEN).

·         Mounted on wheels.

Product Details:

CODE: JKA-230S-1 Technological advancements combined with depleting supplies of natural resources have made it now less expensive to reclaim useful materials from used products than to harvest raw materials from the earth. Items such as used water and soda bottles can be converted into textiles and carpet. Old, worn out car tires can be converted into mats, sports surfacing and roadways. Obsolete electronics and children's toys can be shredded, processed in an automated recovery system, and converted into materials that are used to make similar products over and over again.

·         Shredding is more than just a way to downsize waste for disposal. It is the first step in almost any recycling or material reclamation process. It is one way to help sustain our planet and way of life.

·         The twin shaft shredders are versatile shredders designed for shredding many types of bulky material in the primary stage. The shredders are extremely rugged and have a strong support structure to withstand all loads. "SHREDDERS" are available in a wide range of electrical and hydraulic drive configuration.

·         The housing is solid construction, bolted together. The bearing unit is separate and properly sealed to avoid damage from liquid and solid material, thereby increasing its life. The shredders have low speed, high torque, low noise, low dust and low maintenance. The blades are made from special hardened steel and are easily replaceable. The design of the blades varies according to the material being shredded. Higher capacity shredders are provided with two gear box system ensuring constant torque on both shafts. The shafts are counter rotating and hexagonal in design ensuring excellent griping of the blades.

·         The twin shaft shredders are used for shredding of Medical Waste, Municipal Solid Waste, Wood, Tyres, Plastic, E-waste, Packing material, textile, Drum, Metals, oversize bulky waste, industrial waste, General Waste, Hazardous Waste, end of life equipment and other difficult to shred items.

APPLICATIONS:

·         Wood.

·         Ceramic.

·         Bulky solid wastes.

·         Plastic wastes.

·         Metal.

·         Industrial Paper/Mill waste.

·         Electronic scrap.

·         Construction debris.

CONVEYOR SPECIFICATION:

·         Construction of Conveyor M.S.

·         Construction of Belt PU PVC.

·         Width of the belt 10" to 20".

·         Length of the Conveyor 4 feet to 20 feet.

·         Speed variable 0-60rpm.

·         0.5 to 3HP conveyor motor (ABB/CROMPTON/SIEMEN).

·         Mounted on wheels.

Product Details:

CODE: JKA-230S-1 Technological advancements combined with depleting supplies of natural resources have made it now less expensive to reclaim useful materials from used products than to harvest raw materials from the earth. Items such as used water and soda bottles can be converted into textiles and carpet. Old, worn out car tires can be converted into mats, sports surfacing and roadways. Obsolete electronics and children's toys can be shredded, processed in an automated recovery system, and converted into materials that are used to make similar products over and over again.

·         Shredding is more than just a way to downsize waste for disposal. It is the first step in almost any recycling or material reclamation process. It is one way to help sustain our planet and way of life.

·         The twin shaft shredders are versatile shredders designed for shredding many types of bulky material in the primary stage. The shredders are extremely rugged and have a strong support structure to withstand all loads. "SHREDDERS" are available in a wide range of electrical and hydraulic drive configuration.

·         The housing is solid construction, bolted together. The bearing unit is separate and properly sealed to avoid damage from liquid and solid material, thereby increasing its life. The shredders have low speed, high torque, low noise, low dust and low maintenance. The blades are made from special hardened steel and are easily replaceable. The design of the blades varies according to the material being shredded. Higher capacity shredders are provided with two gear box system ensuring constant torque on both shafts. The shafts are counter rotating and hexagonal in design ensuring excellent griping of the blades.

·         The twin shaft shredders are used for shredding of Medical Waste, Municipal Solid Waste, Wood, Tyres, Plastic, E-waste, Packing material, textile, Drum, Metals, oversize bulky waste, industrial waste, General Waste, Hazardous Waste, end of life equipment and other difficult to shred items.

APPLICATIONS:

·         Wood.

·         Ceramic.

·         Bulky solid wastes.

·         Plastic wastes.

·         Metal.

·         Industrial Paper/Mill waste.

·         Electronic scrap.

·         Construction debris.

CONVEYOR SPECIFICATION:

·         Construction of Conveyor M.S.

·         Construction of Belt PU PVC.

·         Width of the belt 10" to 20".

·         Length of the Conveyor 4 feet to 20 feet.

·         Speed variable 0-60rpm.

·         0.5 to 3HP conveyor motor (ABB/CROMPTON/SIEMEN).

·         Mounted on wheels.

Product Details:

CODE: JKA-230S-1 Technological advancements combined with depleting supplies of natural resources have made it now less expensive to reclaim useful materials from used products than to harvest raw materials from the earth. Items such as used water and soda bottles can be converted into textiles and carpet. Old, worn out car tires can be converted into mats, sports surfacing and roadways. Obsolete electronics and children's toys can be shredded, processed in an automated recovery system, and converted into materials that are used to make similar products over and over again.

·         Shredding is more than just a way to downsize waste for disposal. It is the first step in almost any recycling or material reclamation process. It is one way to help sustain our planet and way of life.

·         The twin shaft shredders are versatile shredders designed for shredding many types of bulky material in the primary stage. The shredders are extremely rugged and have a strong support structure to withstand all loads. "SHREDDERS" are available in a wide range of electrical and hydraulic drive configuration.

·         The housing is solid construction, bolted together. The bearing unit is separate and properly sealed to avoid damage from liquid and solid material, thereby increasing its life. The shredders have low speed, high torque, low noise, low dust and low maintenance. The blades are made from special hardened steel and are easily replaceable. The design of the blades varies according to the material being shredded. Higher capacity shredders are provided with two gear box system ensuring constant torque on both shafts. The shafts are counter rotating and hexagonal in design ensuring excellent griping of the blades.

·         The twin shaft shredders are used for shredding of Medical Waste, Municipal Solid Waste, Wood, Tyres, Plastic, E-waste, Packing material, textile, Drum, Metals, oversize bulky waste, industrial waste, General Waste, Hazardous Waste, end of life equipment and other difficult to shred items.

APPLICATIONS:

·         Wood.

·         Ceramic.

·         Bulky solid wastes.

·         Plastic wastes.

·         Metal.

·         Industrial Paper/Mill waste.

·         Electronic scrap.

·         Construction debris.

CONVEYOR SPECIFICATION:

·         Construction of Conveyor M.S.

·         Construction of Belt PU PVC.

·         Width of the belt 10" to 20".

·         Length of the Conveyor 4 feet to 20 feet.

·         Speed variable 0-60rpm.

·         0.5 to 3HP conveyor motor (ABB/CROMPTON/SIEMEN).

·         Mounted on wheels.

Product Details:

CODE: JKA-230S-1 Technological advancements combined with depleting supplies of natural resources have made it now less expensive to reclaim useful materials from used products than to harvest raw materials from the earth. Items such as used water and soda bottles can be converted into textiles and carpet. Old, worn out car tires can be converted into mats, sports surfacing and roadways. Obsolete electronics and children's toys can be shredded, processed in an automated recovery system, and converted into materials that are used to make similar products over and over again.

·         Shredding is more than just a way to downsize waste for disposal. It is the first step in almost any recycling or material reclamation process. It is one way to help sustain our planet and way of life.

·         The twin shaft shredders are versatile shredders designed for shredding many types of bulky material in the primary stage. The shredders are extremely rugged and have a strong support structure to withstand all loads. "SHREDDERS" are available in a wide range of electrical and hydraulic drive configuration.

·         The housing is solid construction, bolted together. The bearing unit is separate and properly sealed to avoid damage from liquid and solid material, thereby increasing its life. The shredders have low speed, high torque, low noise, low dust and low maintenance. The blades are made from special hardened steel and are easily replaceable. The design of the blades varies according to the material being shredded. Higher capacity shredders are provided with two gear box system ensuring constant torque on both shafts. The shafts are counter rotating and hexagonal in design ensuring excellent griping of the blades.

·         The twin shaft shredders are used for shredding of Medical Waste, Municipal Solid Waste, Wood, Tyres, Plastic, E-waste, Packing material, textile, Drum, Metals, oversize bulky waste, industrial waste, General Waste, Hazardous Waste, end of life equipment and other difficult to shred items.

APPLICATIONS:

·         Wood.

·         Ceramic.

·         Bulky solid wastes.

·         Plastic wastes.

·         Metal.

·         Industrial Paper/Mill waste.

·         Electronic scrap.

·         Construction debris.

CONVEYOR SPECIFICATION:

·         Construction of Conveyor M.S.

·         Construction of Belt PU PVC.

·         Width of the belt 10" to 20".

·         Length of the Conveyor 4 feet to 20 feet.

·         Speed variable 0-60rpm.

·         0.5 to 3HP conveyor motor (ABB/CROMPTON/SIEMEN).

·         Mounted on wheels.

Product Details:

CODE: JKA-239BS

        These waste bag openers are very powerful to be installed at the head of treatment plants for municipal solid waste. They are characterized by a high reliability thanks to a treatment capacity and to couples of considerable magnitude.

·         Waste bag openers are innovative and specific machine that allows the opening and emptying of bags containing the material, the construction method adopted also allows you to rip and empty 98% of bags introduced without cutting or damaging the contents. The bag opener ensures optimum opening of bags of different sizes and a constant supply to the following treatments: it is designed as a modular system, easily adaptable to individual needs.

Product Details:

CODE: JKA-230S-1 Technological advancements combined with depleting supplies of natural resources have made it now less expensive to reclaim useful materials from used products than to harvest raw materials from the earth. Items such as used water and soda bottles can be converted into textiles and carpet. Old, worn out car tires can be converted into mats, sports surfacing and roadways. Obsolete electronics and children's toys can be shredded, processed in an automated recovery system, and converted into materials that are used to make similar products over and over again.

·         Shredding is more than just a way to downsize waste for disposal. It is the first step in almost any recycling or material reclamation process. It is one way to help sustain our planet and way of life.

·         The twin shaft shredders are versatile shredders designed for shredding many types of bulky material in the primary stage. The shredders are extremely rugged and have a strong support structure to withstand all loads. "SHREDDERS" are available in a wide range of electrical and hydraulic drive configuration.

·         The housing is solid construction, bolted together. The bearing unit is separate and properly sealed to avoid damage from liquid and solid material, thereby increasing its life. The shredders have low speed, high torque, low noise, low dust and low maintenance. The blades are made from special hardened steel and are easily replaceable. The design of the blades varies according to the material being shredded. Higher capacity shredders are provided with two gear box system ensuring constant torque on both shafts. The shafts are counter rotating and hexagonal in design ensuring excellent griping of the blades.

·         The twin shaft shredders are used for shredding of Medical Waste, Municipal Solid Waste, Wood, Tyres, Plastic, E-waste, Packing material, textile, Drum, Metals, oversize bulky waste, industrial waste, General Waste, Hazardous Waste, end of life equipment and other difficult to shred items.

APPLICATIONS:

·         Wood.

·         Ceramic.

·         Bulky solid wastes.

·         Plastic wastes.

·         Metal.

·         Industrial Paper/Mill waste.

·         Electronic scrap.

·         Construction debris.

CONVEYOR SPECIFICATION:

·         Construction of Conveyor M.S.

·         Construction of Belt PU PVC.

·         Width of the belt 10" to 20".

·         Length of the Conveyor 4 feet to 20 feet.

·         Speed variable 0-60rpm.

·         0.5 to 3HP conveyor motor (ABB/CROMPTON/SIEMEN).

·         Mounted on wheels.