Chemical Engineering Laboratory Equipments

Product Details:

Laboratory Pasteuriser MTS-904

We are reputed manufacturers and exporters of premium quality Laboratory Pasteuriser. These are manufactured using premium quality raw materials as per the existing industrial standards. These Laboratory pasteuriser are used as a medium for different enzymes to react and produce the desired results. These are widely used in chemical engineering laboratories. These are light-weight equipments which can be easily installed. Since these require minimal maintenance, low maintenance costs are incurred. These are economically priced equipments.
Features

• Easy to install.
• Sturdy design.
• High efficiency.

Additional Information:

• Item Code: MTS-904
• Production Capacity: 185
• Delivery Time: 2-3 WEEKS TIME
• Packaging Details: BOX/ CARTON

Product Details:

Item code: MTS-919

Thermal Conductivity of Metal Rod

Determination Of Thermal Conductivity Of Metal Bar (Brass/Copper)

Description:

The Apparatus Consists Of A Brass Rod, One End Of Which Is Heated By An Electric Heating Coil While The Other End Projects Into The Cooling Water Jacket. The Rod Is Insulated With Glass Wool To Minimize The Radiation And Convection Loss From The Surface Of The Rod And Thus Ensure Nearly Constant Temperature Gradient Throughout The Length Of The Rod. The Temperature Of The Rod Is Measured At Five Different Locations Along The Length. The Heater Is Provided With A Dimmer Stat For Controlling The Heat Input. Water Is Circulated Through The Jacket And Its Flow Rate And Temperature Rise Can Be Measured

The Whole System Is A Single Unit, Consists Of A Metallic, Powder Coated Control Panel With M S Square Tube Table, Which Gives Esthetic Finish. The Apparatus Provided With Digital Instrumentation To Get Accurate Readouts And Results.

Instruction Manual:

• Self-explanatory Operating Manual Provided With The System, Which Contains Brief Theory And Practical Exercises And A Set Of Sample Calculation Report.
• System Components & Specifications:Specimen: 20mm Dia, 450mm Long Brass / Copper Cylindrical Shell: 150mm Dia X 300mm Long M.s.pipe Water Jacket: 100mm Dia X 100 Mm Long M.s.pipe Heater: Band Type, Nichrome 250 Watts Voltmeter: Digital Voltmeter Of Range 0-300v AcAmmeter: Digital Ammeter Of Range 0-20a Ac Temperature Indicator: Digital Temperature Indicator Of Range 0-400°c With Tss Thermocouples: Ptfe Coated Cr –al (K-type)-11 No.Variac: Electronic Dimmer 1.5kw.Measuring Jar. Plastic-250mlStop Watch : digital

Utilities Required To Be Arranged By The Customer:

• Electric Supply:
• 230 V, 5 Amps Ac, 50 Hz, Single Phase Electric Supply With Proper Earthing.

Additional Information:

• Item Code: MTS-919

Product Details:

Item code: MTS-914

Description:-

The Anaerobic Digester is comprised of two 1.3 gallon upward flow packed bed reactors, with feed rate and temperature controls to allow steady, continuous operation at up to 1.1 gallons per day. The reactors may be operated in series or parallel. A buffer vessel between the reactors permits discharge of excess flow from the first reactor when the second reactor is operated in series, but at a lower flow rate. The flow rates to the vessels are set and controlled by peristaltic pumps. The temperature of each reactor is controlled by an electric heating tape wrapped around the external wall. The temperature distribution within each reactor is maintained to ±1°F. Reactor temperatures may be separately set at any desired value in the range ambient to 131°F. The gas off-take from each reactor is taken to a volumetrically calibrated collector vessel operating by water displacement. A constant head, liquid seal device ensures that the gas pressure in the reactor is maintained at a constant value throughout the test run. The collected gas can be exhausted from the vessel and the volume refilled with water during a run, without breaking the liquid seal. Liquid and gas sampling points are located at all strategic points around the reactors.
The equipment is mounted on a steel base with an integral barrier to cope with spillage and wash down. The base is finished in instrument tan texture enamel. The control panel is finished in gloss white enamel and silk screened in KEM black enamel.
Specifications
Reactors
Two identical reactors—nominal capacity, 1.3 gal.; packed volume, 1.1 gal.; 6.25" ID diameter by 10" high.
Reactor packing
1" diameter bio-balls.
Temperature control
For each reactor—836W heating jacket with PID control from a temperature sensor positioned inside the reactor, set point within range ambient to 131°F; the jacket is thermostatically protected by a cutout set at 185°F.
pH Meter
Range: 0.00 - 14.00
Feed pumps
Two identical peristaltic pumps—variable speed using a potentiometer to 12 rpm, with flow rates from 0.04 to 1.1 gal. per day.
Gas collection vessels
Two identical—linear scale, 0–1.3 gal. capacity

Additional Information:

• Item Code: MTS-914

Product Details:

Item code: MTS-905

 Absorption In Packed Column : MTS-905

The absorption column is designed to demonstrate the basics of gas absorption in the unit operations of chemical engineering. A glass absorption column is used to allow mass transfer between the absorption liquid and feed gases within the unit. Students are exposed to the working principle s of a gas absorption column via wetted wall system.
Some of the other features are as follows:
Compares absorption characteristics of packed columns Allows humidification and stripping to be studied Complete visual monitoring of the process Easily operated and used No further development work necessary Suitable for project or research work

Additional Information:

• Item Code: MTS-905

Product Details:

Item code: MTS-907

Sedimentation Studies Apparatus: MTS-907

we are manufacturer supplier and exporter of engineering chemical laboratory equipment. The Sedimentation Studies are high quality equipments which are manufactured at our ultramodern infrastructure facility in compliance with the prevailing industrial standards. These are supplied to clients in different specifications at affordable market prices. Known for their sturdy designs and durable exterior, these equipments are highly demanded by chemical engineering laboratories.

Features:

• Reasonably priced.
• Damage-resistant.
• Efficient performance.

Additional Information:

• Item Code: MTS-907

Product Details:

Gas Absorption Column  : MTS-909

This apparatus is used to determine the air pressure differential across the column as a function of air flow rate at different water flow rates down the column, and flooding point can be noted. Absorption process of carbon dioxide from air-CO2 mixture into caustic soda solution, is also studied using this system.
The system components are mounted within a floor standing painted steel framework.The wetted wall column is a glass column with water inlet and outlet sections and is gimbal mounted to ensure that it can be set accurately vertical.The deoxygenating column is of similar overall size to the wetted wall column, standing vertically adjacent to it. Beside the columns is a control console housing flow meters, pump controls and oxygen analyser. Situated between the columns are two special housings containing the oxygen analysis probes which monitor the oxygen content in the water entering and leaving the absorption column. The apparatus uses water as the working medium, contained in a storage tank at the rear of the unit. Pumps delivering water to the deoxygenator and the absorption column are located at the base of the unit.Dissolved oxygen at inlet and outlet can be measured in rapid succession. The water drains into the storage tank to be recycled to the deoxygenator. In operation, water is sparged with nitrogen in the deoxygenator before entering the top of the wetted wall column. Air is pumped by the integral diaphragm type air pump into the base of the column. The air passes up the column, giving up the oxygen to the water.

Additional Information:

• Item Code: MTS-909

Product Details:

Milikan Oil Drop Experiment MTK-8063

To observe the motion of the oil droplets in the chamber and measure the velocity.

• Compact designed light source, microscope & condensers.
• Easy to operate and understand.
• Condenser System can be easily Disassembled for cleaning and Inspection.
• Accurate measurement of plate voltage, plate separation, time and distance of droplet is done with this apparatus.

Product Details:

Bernoulli’s Theorem Complete with Collecting Tank:-

Item code: MTS-101252

We offer Bernoulli's Theorem Apparatus that is designed for experimental verification of the theorem. The Bernoulli's Theorem Apparatus is easy to set up and operate and is manufactured exactly as per the set guidelines. The set up consists of a one piece clear acrylic test section with convergent and divergent part sections, supply thank, measuring tank, inlet water tank and pump for closed loop water circulation. The test section is connected to Piezometer Tubes through pressure tapping at different locations on the section to demonstrate the Bernoulli’s Theorem. The flow rate of water is measured using measuring tank and stop watch provided.
Objective

• To verify Bernoulli's Theorem experimentally

Features

• Acrylic test section
• Closed loop water circulation
• Compact & stand alone set up
• Stainless Steel tanks and wetted parts
• Superb Painted structure
• Simple to operate & maintain
• Utilities Required
• Electric supply : 0.5 kW, 220V AC, Single Phase
• Water supply :Tap water connection ½” BSP Distilled water @ 60 liters (optional)
• Floor Area with Drain facility

Additional Information:

• Item Code: MTS-101252

Product Details:

Item code: MTS-921

Chiller Water Bath

APPLICATION
Most ideal for chilling and condensing applications in external systems such as Rotary Vacuum Evaporators, Viscometers, Electrophoresis Systems, Chilling of heated water baths and general lab applications of chilling in closed loop systems.
ADVANTAGES & BENEFITS
Compact circulator chiller, can be placed under or over the workbench.Hermetically sealed compressor with environment friendly CFC FREE refrigerants.Reduces tap water consumption thus reducing high cost of water and waste water.Waste water does not contain hazardous substances thus eliminating dangeto personnel and environment caused by solvents.Built-in circulator pump for efficient circulating processes.Offers highest level of performance, flexibility and control for most demanding applications.Low noise level.Wide operating ranges and applications.

CONSTRUCTIONAL FEATURES
Inner bath chamber & lid made of stainless steel (SS-304 grade).Outer body made of CRC sheet duly powder coated.Space between inner and outer chamber filled with high grade PUF insulation.Mounted on castors for easy portability.

CONSTRUCTIONAL FEATURES
Various temperature ranges available to choose from depending upon varied requirements and applications.Microprocessor based PID DIGITAL TEMPERATURE INDICATOR CUM CONTROLLER.With timer, alarm & over temperature protection Powerful circulation pump with 15 Lpm capacity at zero head for water.Use ethanol for temperature ranged below 5 DegreeC.To work on 220/230 volts, 50/60 Hz AC Supply.Working Chamber : 500 x 250 x 250 mm.

Additional Information:

• Item Code: MTS-921

Product Details:

Item code: MTS-912

Aerobic Digester

Aerobic Digester consists of a 2 gallon reactor vessel mounted on a steel base, with a liquid feed pump, air supply, and instrumentation for monitoring and controlling the process.The cylindrical wall of the reactor is made from 2 layers of porous plastic material to retain the suspended solids, while allowing treated water to pass through to the outer, annular exit chamber.This design allows the essential features of the aerobic treatment process to be studied without the distractions of having to settle the solids adequately enough for external recycle, a well known laboratory problem.The porous liners are removable for cleaning, and a spare liner is supplied.Waste water is drawn from a feed tank by a 120V motor driven peristaltic pump. Flow rate is controlled by a variabe run time control that determines the minutes of run time within a 10 minute cycle. The pump delivers the feed to the reactor vessel through a transparent lid. Air is supplied at a measured rate by a small air pump, and discharges into the base of the reactor via an air distribution device. This provides the necessary oxygen for the digestion process, as well as produces sufficient bubbling for stirring and reaction. The liquid level in the reactor is maintained at a constant value of 1 or 2 gal. by an overflow device connected to the outer annular chamber of the vessel. Discharge is by gravity to a floor-standing product tank (not supplied).
The reactor temperature is maintained by a 3-term PID controller which varies power to an immersion heater within the vessel. Any temperature between ambient and 95°F may be selected, with the best conditions being a few degrees above the diurnal maximum in the user’s laboratory.
Dissolved oxygen and pH probes and meters are included.The reactor lid contains a gas exit port, suitable for sampling the gases for subsequent analysis
Specifications
Feed pump 120V, peristaltic, 10 rpm, variable run time control corresponding to 0–13 gal. per dayAir pump 240V/120V, 0–1.35 gpmReactor vessel 2 gal. maxium capacitypH meter Range 0.00 to 14.00Dissolved oxygen meter Range 0–100% saturation, resolution 2%Reactor heater Electrical immersion 250WTemperature controller 3-term PID, temperature limit set at 95°F

Additional Information:

• Item Code: MTS-912

Product Details:

Item code: MT-HB

We are manufacture Export Quality Hydraulic Bench for Fluid Mechanics Laboratory. Hydraulic bench is a very useful apparatus in hydraulics and fluid mechanics. The Hydraulic Bench is designed as a portable and self-contained service module for the range of accessories to carry out experimentation on principles of Fluid Mechanics. Wide range of accessories are available for use with Hydraulic Bench that cover a number of experiments to study principles of fluid mechanics. The whole set-up is well designed and arranged in a good quality painted structure

Experiment of Hydraulic Bench

• Bernoulli's Theorem Apparatus
• Flow measurement by Venturimeter
• Flow measurement by Orificemeter
• Flow over Notch
• Orifice and Mouth Piece
• Losses due to Friction in Pipe Line
• Losses in Pipe Fitting
• Impact of Jet on Vane
• Study of Pressure Measurement
• Pitot Tube
• Free Vortex Apparatus

Technical Specifications of Hydraulic Bench

• Water Circulation 1 HP Pump, Crompton/ Kirloskar make.
• Flow Measurement: Using Measuring Tank, Capacity 40 Ltrs.
• Sump Tank Capacity
• Stop Watch Electronic.
• Control Panel Comprises of: Standard make On Off Switch, Mains Indicator, etc
• Instruction Manual: An English instruction manual will be provided along with the Apparatus Tanks and Top Tray will be made of Stainless Steel.

Additional Information:

• Item Code: MT-HB
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: India

Product Details:

Item code: MTS-917

Rapid Extractor

Laboratory Scale Rapid Extractor is used to extract the active constituents from materials in laboratory scale batch sizes. The Microteknik uses high pressure and extraction phases to achieve a rapid extraction of the active materials with minimum degradation to the product.

Additional Information:

• Item Code: MTS-917

Product Details:

Chemical Reactor Training Equipment : MTS-902

Our dynamic workforce helps us carry out an efficient manufacturing process to manufacture Chemical Reactor Training Equipment. These are made using high quality raw materials and components which are sourced from leading vendors of the market. These equipments are highly demanded for use in chemical laboratories for various training purposes. These are quality compliant equipments which are made available to clients at economical market prices within the specified time period. Besides being easy to install and operate, these are affordable as well.

Technical Description
The properties of different chemical reactors can be investigated by performing a saponification reaction using this trainer. The contact time and reaction temperature can be varied. Their influence on the conversion of reactants is observed in the respective reactor. The reactors are available as accessories. The unit contains two supply tanks for the liquid chemicals. Two variable speed diaphragm pumps pump the reactants through the reactor. Reactant conversion and reaction temperature are measured with a combined conductivity and temperature measuring unit. It is also possible to use PC data acquisition. The reaction is moderated using a controlled hot water circuit. The resulting reaction product is collected in a stainless steel tray in the unit.

Features:

• Efficient performance
• Easy to install
• Easy to maintain

Additional Information:

• Item Code: MTS-902
• Production Capacity: 50-60
• Delivery Time: 2 WEEKS TIME
• Packaging Details: AVAILABLE IN EXPORT BOX PACKAGING (OPTIONAL)

Product Details:

Rising Film Evaporator

Item code: MTS-910

The Microteknik evaporator processes samples in smallest volume under production conditions, sufficient to reveal the effect of heating on any ingredients.

Having single tube-in-jacket evaporator.with longer tubes within the steam space. feed tank, vapour/liquid separator, condenser, concentrate tank, condensate tank, CIP pump and vacuum pump, all manufactured from stainless steel, PTFE and glass.

A sturdy framework and requires only connection to suitable steam, electrical and water services for operation.

 

Less floor space is required to install the evaporator and can to fit easily into a room of standard height.

Additional Information:

• Item Code: MTS-910
• Delivery Time: 1 Week
• Packaging Details: Box, Carton

Product Details:

Double Water Distiller   MTS-906

The Double Water Distiller manufactured by us is highly acclaimed for being sturdy and durable. These equipments are also known for their efficient service life. Manufactured using quality-approved components, these are used for water distillation purposes in chemical engineering laboratories. These are made available to clients within the specified time period at affordable costs. These are easy to install. Being robustly designed, these do not require much maintenance too. We are also involved in the export of these distillers.The distillation provides double distilled water. The high quality borosilicate glassware coupled with silica heater gives pyrogen free distillate of highest purity. The optimization of cooling water volume is controlled by a cooling water flow meter, in addition to this the equipment is fitted with PTS which maintains sufficient water to the boiler.

Features:
Easy to use Dual fail safe operation Simple to clean No metallic contact Replaceable Silica sheathed heaters All threaded connector Technical specifications Output 1.5 litres/hr. 4.0 litres/hr Conductivity, µScm- 0.8-1.2 0.8-1.2Temperature of distillate 30 - 40°C 30 -40°C Pyrogen content Pyrogen free Pyrogen free Cooling Water supply 60liters/hr (approx) 90liters/hr (approx)Electricity supply 220 - 240V, 50-60Hz, 220 - 240V single phase Power requirement 3.0kW 6kW

Features :
Robust design Damage-resistant Affordable

Additional Information:

• Item Code: MTS-906

Product Details:

Item code: MTS-908

"Teknik" Liquid Chromatograph Digital :-

A single source of authoritative information on all aspects of the practice of modern liquid chromatography suitable for advanced students and professionals working in a laboratory or managerial capacity Chapters written by authoritative and visionary experts in the field provide an overview and focused treatment of a single topic Comprehensive coverage of modern liquid chromatography from theory, to methods, to selected applications Thorough selected references and tables with commonly used data to facilitate research, practical work, comparison of results, and decision making Extensive original tables and figures, placing recent research developments into a general context Worked examples, intuitive explanations, and clear figures reinforce learning

Optional: Analogue model are Available.

Additional Information:

• Item Code: MTS-908

Product Details:

Item code: MTS-918

Reverse Osmasis Ultra Filteration Unit:-

The RO/UF unit is the smallest known industrial membrane system of its type in the world. It is designed specifically for laboratory scale testing of both reverse osmosis and ultra filtration techniques.
This is fully self-contained in a mobile cabinet. Comprehensive instrumentation is provided with digital meters displaying temperatures and system pressure. In addition to the membrane module, the cabinet also houses feed and permeate tanks, a plate heat exchanger and positive displacement pumps. Connection to cooling water and a suitable electrical supply is all that is required for normal operation.All parts in contact with the process fluid are constructed from hygienic design materials such as stainless steel, PTFE and silicone rubber.The RO/UF unit has an efficient clean-in-place facility and is easily dismantled for servicing or maintenance.Membranes can be installed or removed rapidly for use in either process.The filtration membranes differ only in length and quantity from those installed in the full-scale plant. Using small quantities of process fluid, operating parameters can be established and then optimised to effect a confident transition to full-scale.

Additional Information:

• Item Code: MTS-918

Product Details:

Batch Enzyme Reactor : MTS-901

This is a reactor system specially designed to perform batch enzyme reaction utilizing the glucose isomerisation reaction catalyze by glucose isomerase. The unit is used to demonstrate batch enzyme kinetics and enzyme characteristics.

The fourth reactor - stirred tank reactor in series - is mounted on a dedicated unit.

The reactors use the saponification reaction between ethyl acetate and sodium hydroxide. This provides a well understood and safe reaction for the students to investigate the different reactor types.

We have developed a set of algorithms which link the degree of conversions of the reactants to the electrical conductivity of the product. In this way the progress of the reaction can be monitored in real time, without the inconvenience and innaccuracy of titration methods.

Features

• Small bench top equipment
• Real time reaction monitoring
• Data logging facility available
• Cost effective - 3 reactors share same service unit
• Safe and student friendly
• Four different types of reactor

Additional Information:

• Item Code: MTS-901
• Production Capacity: 120
• Delivery Time: 2 WEEKS
• Packaging Details: OPTIONAL EXPORT CARTON BOX AVAILABLE

Product Details:

Item code: MTS-920

Flow Through Helical coil

Focused on technological up-gradation, dynamism and innovation, we are moving ahead by maintaining timeliness in delivering a wide gamut of Flow Through Helical Coil. This coil is designed by our adroit professionals using high-grade raw materials and modish technology, who have in-depth knowledge about the industrial standards. Available with us in numerous specifications, to meet the varied demands of our respectable clients.
Features:
Rust proof Less maintenance Maximum strength
Specifications:
Helical Coil Material Stainless Steel Dia – 12”No. of Turns 15Coil Tube Dia OD 21mm, ID 17mm (Approx.)Sump Tank Material Stainless Steel/PVC, Capacity 50 Ltrs Water Circulation FHP Pump, Crompton/Sharp make Manometer 2 Nos Flow measurement Rotameter Piping GI and PVC Control panel comprising of Standard make on off switch, Mains Indicator etcThe whole set-up is well designed and arranged in a good quality painted structure

Additional Information:

• Item Code: MTS-920
• Production Capacity: 125
• Delivery Time: 2-3 WEEKS TIME
• Packaging Details: OPTIONAL EXPORT CARTON PACKAGING AVAILABLE