Electrical Equipments

Product Details:

ELECTRICAL VORTEX APPARATUS

CODE: MTK-500EV

Specification:

·       A low-voltage, variable-speed motor rotates the vessel about its vertical axis. A speed-control unit (included), sited away from the main apparatus, controls the speed of rotation.

·       Vortex Apparatus enables students to produce both free and forced vortices, and measure the vortex water surface profile.

·       To produce a free vortex, students place a smaller, perforated transparent cylinder inside the main vessel. This forms an annulus into which a continuous water supply is directed. When the vessel rotates, water passes through the perforations and spirals slowly inwards to a small hole in the centre of the base of the vessel. The surface falls rapidly towards the centre and produces an air core. Students measure the surface profile using the traverse probe.

·       The equipment consists of a transparent vessel on a support frame, which mounts on a hydraulic bench (Gravimetric or Volumetric Hydraulic Benches, H1 or H1D - available separately). It may also work with another suitable clean water supply and drain.

·       To produce a forced vortex, students add water to the rotating vessel until it is about half full. A forced vortex forms. After a few minutes the vortex becomes constant, and students can measure the surface profile using the traverse probe. The traverse probe can move both horizontally and vertically, and both axes have linear scales. Students can also measure distribution of total head by replacing the traverse probe with a Pitot tube. 

Additional Information:

• Item Code: MTK-500EV
• Production Capacity: 15
• Delivery Time: 5 DAYS

Product Details:

CODE: MT-505I
Specification:
Electrical Test Bench
•    Light Indicator for Mains.
•    Front panel built with high class insulated Printed Bakelite/Aluminum Board sheet with well printed circuits and symbols.
•    4 Pole MCB and 2 Pole MCB for Short Circuit protection
•    Instruction manual.
•    Connections are brought out through 4mm Colored Safety Sockets.
•    Patch Cords 4mm.
•    The trainer is housed in Metal cabinet.
•    Size of the trainer set 30''x20"

Product Details:

·         CODE: JEQ-4A

·         INCUBATOR

·         Thermostatic Incubator

·         Dimension: 12x12x12 inch,3x3 ft,

·         Weight: 10 to 15 kg

·         Power Supply: 220 volts

·         Interior Chamber: 304 stainless steel

·         Exterior Chamber: MS powder-coated

·         Air Circulation: Forced air circulation,

·         Insulation: Mineral Wool

·         Doors: Solid doors with a steel handle,

·         Shelves: 3 Stainless steel shelves (Removable)

·         Temperature Range: 32-149℉ (0-65 ℃)

·         Measurement Accuracy: ±0.5%FS

·         Cold End Compensation Error: ±2℃

·         Service Environment: 0-50 ℃, 30-85% RH

·         Non-corrosive gas application Insulation Strength: 1500VAC/1 min

Product Details:

MPH-EE-41A 
·         COMMUTATOR

·         Thick brass block is mounted on thick bakelite plate.

·         The plugs and lugs thoroughly interlaped for perfect locking Terminals are provided on each segment with extra heavy blocks.

Product Details:

·       MPH-MG-25B 
  MAGNETIC EFFECT OF CURRENT

·         Material: Plastic

·         Size: 18 X 10 X 10 INCHES

·         Magnetic effect of electric current is one of the major effects of electric current in use, without the applications of which we cannot have motors in the existing world.

·         A current carrying conductor creates a magnetic field around it, which is comprehended by using magnetic lines of force or magnetic field lines.

Product Details:

Floating Magnet:MPH-H-7

• This amazingly simple ring magnet set is a great demonstration of magnetic fields
• the colorful magnets float effortlessly above each other! It’s sure to have your students saying ‘Super! Wow! Neat!’ Each set includes four colorful ring magnets and one stand.

Product Details:

MPH-MG-25A 
MAGNETIC EFFECT OF ELECTRIC CURRENT
MAGNETIC EFFECT OF ELECTRIC CURRENT
MAGNETIC EFFECT OF ELECTRIC CURRENT

Product Details:

Burette modular PTFE Key stopcock

 

Burette modular, PTFE Key stopcock class A complies with BS 846

Product Details:

·          ELECTRIC MOTOR SMALL MPHE-4

·         Material: Plastic 

·         Size: SMALL

·         A compact replica demonstrating motor principles, featuring a rotating shaft powered by electricity, illustrating mechanical energy conversion in miniature form.

Product Details:

MTK-512PS Transistor Characteristics Apparatus with with Aluminum Panel & SquareMeters,

Regulated Power Supplies

Objective:Input & Output Characteristics of Common Emitter PNP & NPN TransistorsInput & Output Characteristics of Common Base PNP & NPN Transistor.

Features: Instrument comprises of thefollowing:

Two DCRegulated Power Supplies 0-10VDC/150mA & 0-1VDC/150Ma

Four roundmeters for voltage & current measurement with connections brought out at4mm sockets

One PNP& One NPN Transistor mounted behind the panel with connections brought outat 4mm sockets.

Connectionsof Supplies & Transistors brought out at 4mm Sockets.

Front Panelmade of thick Bakelite sheet

One ON/OFFSwitch with jewel light is provided on the front panel.

Made ofHeavy duty metal box construction

Product Details:

MTK-339PNS PN Junction Diode Characteristics Apparatus with Aluminum Panel &Square Meters

Instruments Comprises the two DC supply 0-1 V DC / 150mA & 0-50 V DC / 150mA, two dual range round meters for measurement of voltage & current PN Junction diode mounted behind the panel, connections of supplies, meters & diodes brought out at 4mm sockets.

Product Details:

MTK-419OA  

·         ANDERSON BRIDGE

·         Andersons Bridge Trainer is used to design Anderson's bridge, which determines the value of unknown inductors (L).

·         This kit has been designed keeping students in mind so it’s very easy to understand and use.

·         Features:

·         On board oscillator section.

·         On board circuit for designing Anderson's Bridge

·         On board amplifier section

·         On board unknown inductors for conducting the experiment

·         On board Speaker interface

·         Test points are provided to analyze signals at various points

·         ON/OFF switch and LED for power indication.

·         Bare board Tested Glass Epoxy SMOBC PCB is used.

·         Block Description Screen printed on PCB

·         All interconnections are made using 2mm banana Patch cords

·         Supplied with User manual and patch cords

·         With built-in power supply

Product Details:

·         CODE: MT-P-14

·         HEATING EFFECT OF ELECTRIC CURRENT

·         WARRANTY 1 YEAR

·         CONDITION NEW

·         MADE IN INDIA

·         BRAND TEKNIK

Product Details:

MPH-EE-38

• For making/breaking of Low voltage electrical circuits, molded plastic base with plated spring metal contacts and screw connectors, Double Throw.

Product Details:

 CODE: MTS-201DT

·         With one mains coil, 240 V, 50 Hz, 2400 turns and two interchangeable secondary coils 65 and 130 turns giving outputs of 6 and 12 V approximately at 2 A maximum.

Product Details:

MTK-303ZDS Zener Diode V-I Characteristics Apparatus with Aluminum Panel & Square Meters (Forward & Reverse)To study forward reverse V - I characteristics of zener diode. Complete Instrument with power supply, meters, zener diodes, connections of supplies.

Product Details:

·    

·         METER BRIDGE MPH-MB-29

·         The four-gap bridge has a large and heavy copper strip of mounted on a heavy 3/4" thick laminated base of size 45" x 4" x 3/4".

·         Nine heavy Brass terminals lock type are provided to reduce the resistance to a minimum.

·         The ends gaps are closed by removable Copper Binding pieces which are held in position by the terminals.

·         The constantan wire is stretched along the top of wooden meter scale and securely clamped to the Brass end strips so that end errors are negligible.

Product Details:

·         SPRING CONSTANT MPH-SC-23

·         To Find the Force constant of a helical spring by plotting graph between load and extension.

·         With Spiral Spring About 25mm Dia & 10cm Long On Metal Base With 250gm Slotted Weight.

·         Simple Pattern with wooden Scale.

·         Heavy Pattern with Graduated Metal Pipe.

Product Details:

CODE: MTS-12451C

·         The Clean Energy Training Equipment allows experimentation with the supply of power through renewable energies and hydrogen based energy storage.

·         The experiment set is designed for basic training needs. It includes all the components needed for setting up an autonomous energy system. Users can observe in detail the entire energy conversion chain, as well as the individual technologies of wind, solar and hydrogen power. The learning and experimentation software allows the selection of different weather and user profiles, which can be used to combine the individual components to create optimized complete systems. The user therefore develops competence in the design of energy systems.

Product Features

·         Modular design with optimized individual components

·         PC-supported measurement and experimentation

·         Solar, wind and hydrogen components can be used separately

·         Magnetic base for easy setup of experiments

·         Practical storage box

Sample Experiments

·         Optimal adaptation of renewable energy sources

·         Production of hydrogen from renewable energy sources

·         Observation of the properties of water during electrolysis

·         Determining the characteristic curve of a fuel cell.

·         Clients can avail from us this range of Clean Energy Training Equipment at most affordable prices.