Hospital Equipments

Product Details:

Product Details:

• The headboards are made of high quality steel tube and wood, which can be freely installed and removed and are stable.
• Angles of the headboards are installed with anti-collision wheel.
• Bed frame welded by profile steel is stable and reliable.
• The towing bracket uses the high quality stainless steel pipe, which is reliable and asy to fix.
• The bed legs are loaded with garment bags, reduced friction with the ground.

Additional Information:

• Item Code: MTH-118C
• Production Capacity: 25
• Delivery Time: 2 weeks

Product Details:

• Frame work made of rectangular M.S. tube 4 section top made of perforated M.S. sheet
• Backrest, knee rest, TB/RTB and hi-lo position maneuvered by separate screw from foot end S.S panel Head & foot bows
• Up and down safety side railing
• Telescopic IV rod with four locations
• Bed mounted on 125 mm diameter castor two with brakes
• Overall Size: 21 (L) x 90 (W) x 60-80 (H) cm
• Finish: Epoxy powder

Product Details:

• Top section is constructed using 50 x 25 mm rectangular mild steel tubes.
• The top of the beds is covered with 1.25 mm thick perforated CRCS steel sheet (2000 L x 900 W mm)
• Legs of the bed are with round CRCS
• Dimensions of the square mild steel pipe are 50mm x 25mm. Its joints are nicely welded
• Bed mounted on four 125 x 30 mm swivel mobile castors, two of which are equipped with breaks
• A foldable aluminum protective side railing of 1450(L) x 380(H) mm
• Leg panels are of different height

• There is an electric motor (with power of 220v) located under the top surface, which allows backrest to be adjusted up to 75 degree
• Height can also be adjusted from 35 to 80 cm as the beds are provided with the smooth crank system

Additional Information:

• Item Code: MTH-109B
• Port of Dispatch: India

Product Details:

• Bed's frame work of strong and precise steel tubes having 'H' type legs on 10 cms castors-two with brakes
• Having four section top of perforated CRCA sheet duly machine press bent with mattress guards
• Backrest and knee rest sections maneuvered by two separate screws from foot end.
• ABS Panels Board. IV Rod locations
• Size: 208 L x 90 W x 60 H cms

Additional Information:

• Item Code: MTS-106C
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: India

Product Details:

• S. S. Arm rest 1 no.
• Anaesthetic screen 1 no.
• Lithotomy leg holders with stirr-ups 1 set.
• Leather wristlets 1 set.
• Padded leg rest (gutter type) can be supplied at an extra cost.

• Trendelenberg.
• Reverse trendelenberg.
• Lateral on either sides.
• Flex.
• Reflex.
• Chair.

• Detachable head rest is easily adjustable to any desired position, above or below table top.
• Detachable leg section facilitates ortho-attachment to be assembled at later stage. It is also most convenient to gynaecologist & urologist.
• Table top can be rotated 360° through base.
• Kidney bridge is provided to attain 13 cms height.
• All corners of base and table top are rounded to avoid any injury.

Product Details:

• Body contoured electrically –driven engines (Raising and lowering, back rest upright to flat)
• In the char movement – one more optional control in tray unit if required
• All PU molded cushions are covered with special tough transparent lamination.
• Dual colors PU based fine painting with transparent clear coating
• IR sensor controlling light with dual operating
• High power motorized suction: High and low suction points with flow control future including auto flush mechanism
• Char mount unit: modular delivery system with hanging cords
• In tray unit: 3 way syringe, air rotor, air motor, micro motor and scaler (Scaler if required)
• X- Ray viewer – Large LCD display with flexible movement
• Multi function in foot control: Air Rotor, Air motor, micro motor and scaler, chair movements and operating light
• Dentist stool with push back movement and pneumatic piston for height adjustment

Additional Information:

• Item Code: MTH-122B
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: India

Product Details:

• Net weight of Emergency Ambulance Stretcher: 45kg.
• Gross weight of Emergency Ambulance Stretcher: 55kg.
• The Load bearing capacity of Emergency Ambulance Stretcher: 159kg.
• Product size (LxWxH): 190x59x85cm.
• Dimension of the packing box:200x60x27cm.

Additional Information:

• Item Code: MTH-110B
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: India

Product Details:

• Economy Model Folding Wheel Chair,
• Light Weight Folding Wheel Chair
• Children Wheelchair
• Wheelchair Heavy Duty
• Wheelchair Detachable Footrest
• Wheelchair Detachable Armrest
• Wheelchair Detachable Footrest
• Wheelchair Reclining High Back
• Aluminum Wheelchair
• Electronic Wheelchair
• Commode Wheelchair
• Motorized Wheel Chair

Additional Information:

• Item Code: MTH-121B
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Delivery Time: 1 Week
• Packaging Details: Box , Carton

Product Details:

Additional Information:

• Item Code: MTK-3789G
• Production Capacity: 110
• Delivery Time: 2-3 WEEKS TIME
• Packaging Details: CARTON/ WOODEN BOX

Product Details:

• Two stainless steel tops with 3 sides raised and front turned down
• Railings on 3 sides above main cabinet
• Handle and magnetic latch on door
• CRCA steel box mounted on 20 mm x 20 mm crca sq. Tube frames
• Pre-treated and epoxy powder coated

Additional Information:

• Item Code: MTH-115B
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: India

Product Details:

• Base and frame are made up of ERW steel tubes that are mounted on four castors of 12.5 cm diameter. Two out of the four castors are provided with brakes
• Uniformly perforated four section steel sheet top
• Ends of head leg of SS tubular assembled to laminated panels
• Four separated imported actuators for maneuvering backrest knee rest, trendlenburg- trend hi-low positions
• Collapsible and removable type steel railing to full length with EPC frame
• Four rubber buffers preclude the possibility of damage to the wall
• Telescopic SS saline rod with hooks
• Size: 202 x 90 cm (W)
• Height is adjustable from 55 to 75 cm
• Pre-treated and epoxy powder coated

Additional Information:

• Item Code: MTH-107B
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other
• Port of Dispatch: India

Product Details:

Item code: JCA-021B

Salient features:

·         These Class II safety cabinet provide protection for the operator and the environment, with inward airflow away from the operator. Air is filtered before release to the atmosphere.

·         Negative pressure is maintained within the cabinet, which is suitable for work where no product protection is required.

·         These cabinets are self-contained 100% exhaust containment enclosures. Air from the work zone passes through a two-stage, high efficiency filter system before being exhausted to the room/atmosphere. These cabinets may be installed on standard laboratory benches or on optional support stands.

·         Personnel and environment protection is provided by inward flow of room air at the work area and high-efficiency particulate air (HEPA) filtration of exhaust air. The inward airflow sweeps aerosols generated during the work process away from the operator into the filter system. A pre-filter protects the HEPA filter from large particles, and the HEPA filter removes particulate contaminates down to sub-micron size from the exhaust air.

·         Supplied complete as above, with cord and plug, suitable to work on 220V single phase, 50Hz, AC supply.

Product Details:

CODE: JRS-05

·         These blood banks are designed to meet all modern requirements for conserving whole blood and other specific products used in medicine such as vaccines, reagents, cultures, processing and storing of blood.

·         Standard double walled construction, inner chamber made of stainless steel sheet, outer made of thick mild steel sheet powder coated paint and gap filled with glass wool/PUF for temp. Insulation. complete with face lifting door having locking arrangement.

·         Also having a transparent plexiglass door.

·         Internal cabinet lighting is provided by lamp which is illuminated whenever door is open.

Product Details:

CODE: JRS-05

·         These blood banks are designed to meet all modern requirements for conserving whole blood and other specific products used in medicine such as vaccines, reagents, cultures, processing and storing of blood.

·         Standard double walled construction, inner chamber made of stainless steel sheet, outer made of thick mild steel sheet powder coated paint and gap filled with glass wool/PUF for temp. Insulation. complete with face lifting door having locking arrangement.

·         Also having a transparent plexiglass door.

·         Internal cabinet lighting is provided by lamp which is illuminated whenever door is open.

Product Details:

CODE: JEQ-1B

Salient features

·         User friendly control system with PLC for reliable and effective sterilization.

·         Color touch screen display for simple operation and excellent process visualization

·         Safe stainless steel doors with redial locking arrangement

·         Thermal printer for comprehensive documentation of Every Batch

·         Electrical system designed as per international standers with highest level of safety.

·         Stainless-steel Pipeline for Long Life and Superior Hygiene

·         Automatic Pneumatic Valves with non-Corrosive body for effortless operation.

·         One-piece temperature and pressure resistant silicon gasket.

·         Insulated chamber and steam generator for minimal heat loss and high energy conservation.

·         Energy efficient electric steam generator with automatic pressure control switch.

·         Optional Boiler dozing system with intelligent level control for feeding RO water in the steam generator.

·         High capacity vacuum pump for effective air removal and excellent draying.

Product Details:

CODE: JEQ-1B

Salient features

·         User friendly control system with PLC for reliable and effective sterilization.

·         Color touch screen display for simple operation and excellent process visualization

·         Safe stainless steel doors with redial locking arrangement

·         Thermal printer for comprehensive documentation of Every Batch

·         Electrical system designed as per international standers with highest level of safety.

·         Stainless-steel Pipeline for Long Life and Superior Hygiene

·         Automatic Pneumatic Valves with non-Corrosive body for effortless operation.

·         One-piece temperature and pressure resistant silicon gasket.

·         Insulated chamber and steam generator for minimal heat loss and high energy conservation.

·         Energy efficient electric steam generator with automatic pressure control switch.

·         Optional Boiler dozing system with intelligent level control for feeding RO water in the steam generator.

·         High capacity vacuum pump for effective air removal and excellent draying.

Product Details:

CODE: JEQ-1R

·         Inner Chamber is made up of thick non-magnetic steel of 304/316 quality and jacket is made out of rolled steel. Single door made of rolled steel lined with S.S. sheets has radial locking system.

·         All units are hydraulically tested upto 40psi.

·         The space between outer cover made of thick rolled steel sheet and the steam jacket is filled with asbestos sheet or glass wool to minimize thermal losses.

·         Boiler is made of thick stainless steel sheet and is located under the sterilizer.

·         Unit is fitted with water level indicator, safety valve, pressure gauge, water inlet and drain valves.

·         Unit is also fitted with low-water level cut-off device and automatic pressure control device.

·         Rectangular sterilizes are fitted with SELF LOCKING SAFETY DOOR device.

·         The door cannot be opened when chamber is under pressure.

·         Two separate valves are provided for evacuating steam from inner chamber and jacket, as and when desired.

·         Fitted with safety valve as a safety device.

·         Drain valve is fitted at the side bottom for easy draining/cleaning.

·         Fitted with vacuum breaker to break vacuum in case of formation of vacuum due to steam condensation.

·         Triple Walled with Steam Jacket and Separate Boiler. Sterilization cycle is controlled by Multiport Valve. The unit is fitted with all standard accessories.

·         To work on 440 volts, 3 Phase, A.C. Supply.

Product Details:

JEQ-11TL

·         Feature

·         All stainless steel 304 construction. It is half-closed structure.

·         Heliarc-welded seams and joints, ground and polishes to match adjoining surfaces.

·         It with the adjustable square base. The table height is adjustable from 720 to 920mm

·         Table can rotate 30 degree

·         Operating tray removable (3pcs) and detachable operating tray.

·         Plumbing and electrical lines factory installed and require only single point connection at the project location.

·         There is the power of the socket on the side of table. It is waterproof and can be used for other instrument connections.

·         Crushing and sewage system

·         Large single compartment sink basin.

·         With the pulverizer, it can crush dirt and little bone instantly.

·         Two taps. Sensor faucet with cold water and manual faucet with hot or cold water.

·         With the removable spray tap, the water pressure can be adjusted. It can wash and clean each corner of table dirt.

·         Drained system

·         Rapid and positive drainage

·         With drained pipeline, the treated liquid drained along the drained system

·         Exhaust system function. Air outlet is at the inside of the table. The exhaust way is down. It needs to connect with the exhaust blower outside.

·         OEM and customer special request is accepted

Product Details:

·         MTH-977CC

·         Color: Golden/Silver

·         Material: Aluminum

·         Package: Carton

·         Wheels: 125mm

·         Net weight: 15.1KG

·         Capacity: 450KG

Product Details:

MTH-970FT

·         Full stainless steel 304

·         Size and shape are customizable

·         Wheels with brake

Product Details:

JKA-095 Cabinets are manufactured inPre-fabricated PUF panels

The PUF is foamed in therebyensuring faster & longer temperature retention

Temperature range: 2C to 8C withDigital Display

Inner chamber, Outer body &trays made up by SS 304

Uses Heavy Duty Refrigerationsystems for faster & efficient cooling

Microprocessor TemperatureController.

SpecialFeature:-

With Temperature Variation Alarm.

Door Opening Alarm.

Power Failure Alarm.

Product Details:

• Comprise of a cabinet with separate carriages for storage of cadaver.
• Each compartment is equipped with a hinged door locking arrangement.
• The cabinet is made of prefabricated polyurethane foam (PUF).Sandwich panels which are assembled at side
  with other lest technology.

Special Feature:-

• With Temperature Variation Alarm.
• Door Opening Alarm.
• Power Failure Alarm.

Additional Information:

• Item Code: MTS-308
• Production Capacity: 75
• Delivery Time: 1-2 weeks
• Packaging Details: export level packaging available

Product Details:

• Frame work constructed with precise round steel tubes having dia 30mm.
• Back rest raised by crank system, located at the end of leg section, crank is folding in nature.
• IV rod provision.
• 2 section bed-detachable chromed steel head/foot with laminated board.
• Frame work mounted on heavy duty PVC rubber stumps.
• Pre-treated and epoxy powder coated.
• Overall size: 200(L) x90(W) x50(H) cm

Additional Information:

• Item Code: MTH-105HB

Product Details:

• Overall size - Chair position: 770 x 680 x 1125 mm.
• Bed position: 2050 x 680 x 550 mm.
• Stainless steel tubular frame work mounted.
• Easily convertible to chair.
• Castors to facilitate couch position.
• High quality durable mattress in three sections.
• Compact construction to save space.

Product Details:

• Strong mild steel tubular frame work.
• Pre treated and epoxy powder coated finishing.

Product Details:

• Baby Cot constructed with mild steel material.
• Down ward foldable Safety side railing.
• 50 mm thick water proof PU mattress.
• Mounted on 75 mm swivel castors, two with breaks.
• Epoxy powder coated finishing.
• Size: - 900(H) x 450/(W) x 900(H) mm.

• White, Black, Blue.

• Packed In Heavy Duty Pallet Boxes.

• 2 mm PU water proof Mattress.
• Stainless Steel IV telescopic Stand.
• Also available in stainless steel material.

Additional Information:

• Item Code: MTH-108B
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other
• Port of Dispatch: India

Product Details:

• Approximate dimensions of the leg section: 930 (L) x 640 (W) mm
• Bed top in two sections, body section mounted on rubber stumps and legs section mounted on two castors with brake
• Legs section can be completely recessed under the body section
• Mattress 60 mm thick foam covered with waterproof synthetic material
• Table consisting of pair lithotomy poles with strip or knee pad
• Stainless steel bowl arrangement underneath of leg section

Additional Information:

• Item Code: MTH-119B
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: India

Product Details:

• CRCA sheet main cabinet and a drawer
• Mounted on 50 mm dia.twin roller wheels, front wheels with brake
• Stainless steel tops with 3 sides raised and front turned down
• Pre-treated and epoxy powder coated

Additional Information:

• Item Code: MTH-116B
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: India

Product Details:

• Body: fully stainless steel maximum.
• Height: 16 inchesouter.
• Diameter: 17 inches.
• Weight: 9 kgs (appr. ).
• Electric supply: 230 50hz. Single phase a. C. Connected load: 90 watts.
• Power consumption: 0. 150kws / hr.
• Atomizing cap.: 30 - 35 ml / min.

• Light weight and portable.
• Easy to operate virtually no maintenance required. negligible power consumption.
• 100% convenient.
• Disinfection procedure.
• Unpack the equipment and check the functioning by plugging it into a pin 5 amps 230 v electrical socket.
• Ascertain the dos'age required for the room to be disinfected.
• Place 'ot fumigator' inside the operation theatre.
• Pour in the formation & water into the dish from sides.
• Close and seal all the windows, ventilators openings and the door of the place to be disinfected.
• Plug in the unit's main cord into a 3 pin, 5 amp, 230v.
• electrical sockets with switch. Which must be provided outside the operation theatre or use automatic timer.
• Switch on the 'ot fumigator' and allow it to run for 30 minutes then switch it off.
• Wait for 6 hours and open the room before re-using the room, exhaust remaining fumes if any by switching on the fan / exhaust of the window and airconditioner.

Product Details:

• Top of the bed is covered with heavy duty mild steel wire mess
• Bed equipped with IV rod Locations
• Pre treated and epoxy powder coated finishing
• App. Dimension: - 2040 (L) x 900 (W) x 500 (H)mm
• Strong Steel tubular frame work in two section
• Manually Adjustable back rest on ratchet
• Steel head and foot bow with unequal height, with vertical tube supports

Product Details:

• Frame Work Constructed with Heavy duty Ms Steel Sheet.
• Two Glass Doors Available With Individual Key Locking.
• Three Adjustable Glass Selves.
• One Bottom Cabinet with Key Locking Facility.
• Overall Size:-1800(L)*1050(W)*450(D) mm.

• Pre-treated and epoxy powder coated
• 5 shelves,doors & 2 sides of 5 mm thick fine glass

Additional Information:

• Item Code: MTH-117B
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: India

Product Details:

• Size : 210L x 56W x 82H cms.
• Frame work made of ERW tubular pipe of 31 mm. dia mounted on four 15 cms. dia. castors 2 with brakes.
• Removable stretcher top made of S.S. Sheet pressed on tubular frame.
• Brackets on alternate ends for IV drip rod.
• Knockdown construction.
• With Oxygen Cylinder Holder.

Product Details:

Item code: MTK-5425H

·         Usage/Application: Pharmaceutical Industry

·         Frequency 50-60 Hz

·         Phase Single Phase

·         Noise Level >65 dB

·         Type Hatch

·         Static Pass box is specifically designed such that the material transfers without much personnel movement. Controlling the entrance of particulate air contamination into the clean room and other controlled environments is supreme in order to continue the integrity of products and processes

Product Details:

Item code: MTK-5425H

·         Usage/Application: Pharmaceutical Industry

·         Frequency 50-60 Hz

·         Phase Single Phase

·         Noise Level >65 dB

·         Type Hatch

·         Static Pass box is specifically designed such that the material transfers without much personnel movement. Controlling the entrance of particulate air contamination into the clean room and other controlled environments is supreme in order to continue the integrity of products and processes

Product Details:

Item code: MTK-5425H

·         Usage/Application: Pharmaceutical Industry

·         Frequency 50-60 Hz

·         Phase Single Phase

·         Noise Level >65 dB

·         Type Hatch

·         Static Pass box is specifically designed such that the material transfers without much personnel movement. Controlling the entrance of particulate air contamination into the clean room and other controlled environments is supreme in order to continue the integrity of products and processes

Product Details:

Item code: MTK-5425H

·         Usage/Application: Pharmaceutical Industry

·         Frequency 50-60 Hz

·         Phase Single Phase

·         Noise Level >65 dB

·         Type Hatch

·         Static Pass box is specifically designed such that the material transfers without much personnel movement. Controlling the entrance of particulate air contamination into the clean room and other controlled environments is supreme in order to continue the integrity of products and processes

Product Details:

Item code: MTK-5425H

·         Usage/Application: Pharmaceutical Industry

·         Frequency 50-60 Hz

·         Phase Single Phase

·         Noise Level >65 dB

·         Type Hatch

·         Static Pass box is specifically designed such that the material transfers without much personnel movement. Controlling the entrance of particulate air contamination into the clean room and other controlled environments is supreme in order to continue the integrity of products and processes

Product Details:

Item code: MTK-5425H

·         Usage/Application: Pharmaceutical Industry

·         Frequency 50-60 Hz

·         Phase Single Phase

·         Noise Level >65 dB

·         Type Hatch

·         Static Pass box is specifically designed such that the material transfers without much personnel movement. Controlling the entrance of particulate air contamination into the clean room and other controlled environments is supreme in order to continue the integrity of products and processes

Product Details:

CODE: JEQ-1B

Salient features

·         User friendly control system with PLC for reliable and effective sterilization.

·         Color touch screen display for simple operation and excellent process visualization

·         Safe stainless steel doors with redial locking arrangement

·         Thermal printer for comprehensive documentation of Every Batch

·         Electrical system designed as per international standers with highest level of safety.

·         Stainless-steel Pipeline for Long Life and Superior Hygiene

·         Automatic Pneumatic Valves with non-Corrosive body for effortless operation.

·         One-piece temperature and pressure resistant silicon gasket.

·         Insulated chamber and steam generator for minimal heat loss and high energy conservation.

·         Energy efficient electric steam generator with automatic pressure control switch.

·         Optional Boiler dozing system with intelligent level control for feeding RO water in the steam generator.

·         High capacity vacuum pump for effective air removal and excellent draying.