Scientific Laboratory Equipments

Product Details:

B.O.D. INCUBATOR (LOW TEMP.) : JEQ-4C 

B.O.D. (Bio-chemical Oxygen Demand) Incubator (Low Temp.) :

B.O.D. (Bio-chemical Oxygen Demand) Incubator (Low Temp.) : Double walled construction. Inner chamber made of anodized aluminum sheet/stainless steel with self supports for wide range of shelf spacing. Supplied with two/three removable perforated shelves. Clear inner door of acrylic sheet allows inspection of material without disturbing chamber temperature. Outer double walled door is provided with magnetic gasket, lock & key and door operated lamp illumination. The cabinet is mounted on castors.

Temperature is controlled by a micro processor digital temperature controller cum indicator from 5°C to 50°C ± 1°C. Inner air circulating system provided for uniform temperature in the whole chamber. A silent sealed compressor with protective devices along with fan cooled condensing coil are placed below the chamber for safe and efficient working.

Control panel provided at top of cabinet has three indicator lamps for mains, heating & cooling, voltmeter, temp. controller, cord-plug etc. and equipment is workable on 220 V AC 50 Hz single phase.

Note: Use of a suitable Voltage Stabilizer is essential.

Optional Arrangements Available :

Digital temp. indicator-cum-controller with computer data logger.
Thermo-hygro-graph.
Timer : 0-24 hrs.
Day/night cycle.
CO2 / Air mixture inlet nozzle.
Audio-visual alarm.
Automatic Voltage Stabilizer 3 KVA.

Humidity System (Steam) for BOD Incubator : JEQ-4(C1)

BOD Incubator can be provided with humidity arrangement.
Humidity is created by condensation of steam generated by heaters dipped in water. Humidity is controlled by imported humidistat from ambient to 95% ± 3% RH.

Additional Information:

• Item Code: JEQ-4C
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Production Capacity: 556
• Delivery Time: 2 WEEKS
• Packaging Details: BOX/CARTON

Product Details:

High Temperature Oil Bath : JEQ-7

High Temperature Oil Bath has a chamber made of copper/stainless steel sheet. Temperature thermostatically controlled upto 150ºC. Complete with high speed stirrer with speed controller.

Chamber size :

250 x 250 x 250 mm
300 x 300 x 250 mm
355 x 355 x 250 mm

Optional: Digital micro process PID temperature controller cum indicator.

Additional Information:

• Item Code: JEQ-7
• Production Capacity: 50
• Delivery Time: 1 week

Product Details:

Item code: JEQ-4G 

Carbon Dioxide Incubator :

Inner chamber measuring 45 x 71 x 45 cm. made of stainless steel sheet. A full view inner glass door is provided along with outer double walled door provided with magnetic gasket. Inlet nozzle for Carbon Dioxide or Air mixture is also provided. Temperature range 5°C above ambient to 60°C ± 2°C. Complete with pressure gauge, inlet/outlet of air/gas, cord plug etc.

Workable on 220V AC 50Hz single phase.

Optional :

• Air compressor
• Carbon Dioxide cylinder with rubber pipes

Additional Information:

• Item Code: JEQ-4G
• Production Capacity: 40
• Delivery Time: 2 WEEKS

Product Details:

Item code: JEQ-2B

Serological Water Bath : Construction of bath with a pyramidal type cover made of stainless steel. Temperature control by a thermostat 5°C above ambient to 90°C ± 1°C. Complete with Temp. Control Knob, on-off switch, pilot lamps, cord-plug etc. It works on 220V AC 50Hz single phase.



Optional Accessories :

• Stirrer with stainless steel rod & blades.
• Digital Temp. Indicator. or Indicator-cum-Controller.

Additional Information:

• Item Code: JEQ-2B
• Production Capacity: 50
• Delivery Time: 1WEEK
• Packaging Details: BOX

Product Details:

Item code: JEQ-4OA 

The Refrigerated incubator shakers should have following specifications: 1. Temperature range: Ambient minus 15°C to 80°C 2. Temperature accuracy: 0.5 o C or better at 37 o C 3. Temperature uniformity 0.3 o C or better at 37 o C 4. The incubator shaker should be stackable type 5. The refrigerant should be CFC free 6. Size of shaking platform: at least 18 x 18 inch. 7. Speed range : 15 to 400 RPM with variable speed control 8. Motor type : DC brushless 9. Continuous and timed operation: 0.1 hr. to 99.9 hr. 10. Should be fitted with audible and visible alarm for speed and temperature deviations 11. Should be fitted with mechanical and electronic safety devices 12. Programming for multiple parameter changes to temperature, speed and other parameter on a timed basis. 13. Capacity: Machine should be capable of holding flasks of 100/125 ml, 250 ml, 500 ml, 1000 ml and 2000 ml. 14. The following flask clamps to be supplied along with each Incubator Shaker 125 ml flask clamp -- 8Nos. 250 ml flask clamp -- 4Nos. 1000 ml flask clamp -- 4Nos. 2000 ml flask clamp -- 2Nos. 15. Slide out platform for easy access to all the samples on run. 16. A suitable servo stabilizer should be provided along with the machine for its proper functioning. 17. Warranty : 5 years

Additional Information:

• Item Code: JEQ-4O
• Production Capacity: 20
• Delivery Time: 2 Week
• Packaging Details: Hard Card Board Box

Product Details:

Item code: JEQ-1A 

Vertical Autoclaves : A versatile electrically heated sterilizer under saturated steam of adjustable pressure of 10 to 20 psi. Double walled construction with boiler made of stainless steel, outer shell made of mild steel or stainless steel sheet. The lid is made of stainless steel or gun-metal plate, tightening allround with wing nuts.

Gasket made of molded joint-less Neoprene rubber. Equipped with water level arrangement, pressure gauge, air/steam release cock, spring loaded safety valve adjustable to any selected point from 10 psi to 20 psi, accuracy ± 3 psi and drain, cord-plug etc.; to work on 220V AC 50Hz single phase.


Optional Accessories :

• Automatic low water level cut-off device
• Pressure control switch
• Radial lock
• Pedal lift
• Stainless Steel basket
• Time
• Digital micro process PID temperature
• controller cum indicator.

Note : Models are provided with pedal lifting device.

Additional Information:

• Item Code: JEQ-1A
• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: Ready Stock
• Delivery Time: 1 Weak
• Packaging Details: Standard Packing Wooden Box

Product Details:

Item code: JEQ-4P

ENVIRONMENTAL SHAKER INCUBATOR JEQ-4(P) :

Environmental Shaker–Incubator for biotechnological and pharmaceutical laboratories is a professional category equipment designed for cultivation of microorganisms and eukaryotic cells including animal, plant and insect cells. Shaker is equipped with a direct-drive mechanism for platform motion.

It provides reliable and stable operation for the long term experiments needed for cell growth. Shaker–Incubator provides smooth or intensive mixing in flasks installed on the platform.

Built-in noiseless thermo resistant brush less fan provides precise temperature distribution inside the chamber (adjustable for up to 80°C). The inner chamber is made of stainless steel. State–of–the–art motor, newest thermal insulation materials,
soft-start of the platform motion and temperature PID–control decrease the energy consumption and make the Shaker–Incubator highly energy efficient despite its relatively large size.

Specifications:

• Speed range 50–250 rpm (increment 10 rpm)
• Temperature setting range +25°C … +80°C
• Temperature control +10°C above ambient … +80°C range
• Setting resolution 0.1°C
• Stability ±0.5°C
• Maximum load 8 kg
• Orbit diameter 20 mm
• Timer with sound alarm 1 min–96 hrs (1 min increment)
• Display LCD, 2×16 signs.

Optional Accessories:

 

• Chart recorder weekly.
• RS-232 interface for operating through computer.
• Cyclic timer for regulating illumination conditions.
• Automatic voltage stabliser 3 kva.

Additional Information:

• Item Code: JEQ-4P

Product Details:

Item code: JEQ-2C

Temperature and Precision Control Water Bath : JEQ-2C

Specifications of Water bath but temperature controlled by solid state controller with stirrer with S.S. rod & blade to make temp. of bath all-round uniform and constant. Chamber of stainless steel sheet.

• Temperature range: 50°C above ambient to 100°C.

• Chamber size :

  425 x 250 x 225 mm
  450 x 375 x 375 mm
  600 x 450 x 450 mm

  Optional:

  Digital micro process PID temperature
  controller cum indicator.

Additional Information:

• Item Code: JEQ-2C

Product Details:

Item code: JEQ-4A 

Bacteriological Incubator (Memmert type) has a standard double walled construction. Inner chamber made of aluminium or stainless steel sheet and outer made of mild steel sheet finished in powder coated colour combinations. Gap filled with glass wool for temp. Insulation. Double walled door with double glass window for observation in the chamber.

Temperature range 5 °C above ambient to 80°C ±3 °C controlled by a thermostat. L-shaped thermometer provided along with pilot lamps, on-off switch temp. Control knob etc. It works on 220V AC 50Hz single phase.

Chamber sizes in mms :: No. of Trays

• 355 x 355 x 355 :: 2
• 455 x 455 x 455 :: 2
• 455 x 605 x 455 :: 3
• 605 x 605 x 605 :: 3
• 910 x 605 x 455 :: 3
• 910 x 605 x 605 :: 3

Optional :

• Air circulating fan.
• Timer 24 hours.
• Digital temp. Controller-cum-indicator.
• Digital temp. indicator-cum-controller with computer data logger.

Note : Oven & incubator sizes not covered can be fabricated on demand.

Additional Information:

• Item Code: JEQ-4A
• Production Capacity: 60
• Delivery Time: 2 week

Product Details:

Horizontal Autoclaves : JEQ-1B

Optional accessories :

A versatile electrically heated sterilizer under saturated steam of adjustable pressure of 10 to 20 psi. Double walled construction with boiler made of stainless steel, outer shell made of stainless steel sheet. The lid is made of stainless steel or gun-metal plate, tightening all round with wing nuts.

Gasket made of molded joint-less Neoprene rubber. Equipped with water level arrangement, pressure gauge, air/steam release cock, spring loaded safety valve adjustable to any selected point from 10 psi to 20 psi, accuracy ± 3 psi and drain, cord-plug etc.; to work on 220V AC 50Hz single phase.

Autoclave vertical but in horizontal position and without steam jacket.

Digital microprocessor temp. controller

Automatic low water level cut-off device

Pressure control switch

Product Details:

Item code: JEQ-4H 

Hybridization Incubator: Inside made of stainless steel temp. Range 5°C above ambient to 90 °C. Temp. controlled by pid controller. This chamber has air circulating fan to ensure uniformity of temp. A carrier to hold bottles ( 6 number of 60 mm diameter x 200 mm depth) can be easily placed on front of rotator mechanism any bottle can be taken out easily from the carrier. The carrier rotates with bottles parallel to the door at a variable speed of 2 to 16 RPM. Viewing glass window in the top allows inspection of the specimen inside the chamber.

 

Additional Information:

• Item Code: JEQ-4H
• Production Capacity: 256
• Delivery Time: 1 week
• Packaging Details: wooden box/ carton available

Product Details:

Item code: JEQ-4C

• B.O.D. (Bio-chemical Oxygen Demand) Incubator (Low Temp.): Double walled construction. Inner chamber made of anodized stainless steel/mild steel with self supports for wide range of shelf spacing. Supplied with two/three removable perforated shelves. Clear inner door of acrylic sheet allows inspection of material without disturbing chamber temperature. Outer double walled door is provided with magnetic gasket, lock & key and door operated lamp illumination. The cabinet is mounted on castors.
• Temperature is controlled by a microprocessor digital temperature controller cum indicator from 5°C to 50°C ± 1°C. Inner air circulating system provided for uniform temperature in the whole chamber. A silent sealed compressor with protective devices along with fan cooled condensing coil are placed below the chamber for safe and efficient working.
• Control panel provided at top of cabinet has three indicator lamps for mains, heating & cooling, voltmeter, and temp. Controller, cord-plug etc. and equipment is workable on 220 V AC 50 Hz single phase.
• Note: Use of a suitable Voltage Stabilizer is essential.
• Size of chamber in mms (WxHxD)           Capacity (cu ft.)
• 455 x 410 x 610                                                  4.00
• 500 x 800 x 415                                                  6.10
• 565 x 865 x 550                                                  10.00
• 650 x 900 x 550                                                  12.00
• 700 x 900 x 650                                                  15.00

Optional Arrangements Available:

• Digital temp. Indicator-cum-controller with computer data logger.
• Thermo-hygro-graph.
• Timer: 0-24 hrs.
• Day/night cycle.
• CO2 / Air mixture inlet nozzle.
• Audio-visual alarm.
• Automatic Voltage Stabilizer 3 KVA.

Humidity System (Steam) for BOD Incubator : JEQ-4(C1)

• BOD Incubator can be provided with humidity arrangement.
• Humidity is created by condensation of steam generated by heaters dipped in water.
• Humidity is controlled by imported humidistat from ambient to 95% ± 3% RH.

 

Product Details:

Item code: JEQ-4C

• B.O.D. (Bio-chemical Oxygen Demand) Incubator (Low Temp.): Double walled construction. Inner chamber made of anodized stainless steel/mild steel with self supports for wide range of shelf spacing. Supplied with two/three removable perforated shelves. Clear inner door of acrylic sheet allows inspection of material without disturbing chamber temperature. Outer double walled door is provided with magnetic gasket, lock & key and door operated lamp illumination. The cabinet is mounted on castors.
• Temperature is controlled by a microprocessor digital temperature controller cum indicator from 5°C to 50°C ± 1°C. Inner air circulating system provided for uniform temperature in the whole chamber. A silent sealed compressor with protective devices along with fan cooled condensing coil are placed below the chamber for safe and efficient working.
• Control panel provided at top of cabinet has three indicator lamps for mains, heating & cooling, voltmeter, and temp. Controller, cord-plug etc. and equipment is workable on 220 V AC 50 Hz single phase.
• Note: Use of a suitable Voltage Stabilizer is essential.
• Size of chamber in mms (WxHxD)           Capacity (cu ft.)
• 455 x 410 x 610                                                  4.00
• 500 x 800 x 415                                                  6.10
• 565 x 865 x 550                                                  10.00
• 650 x 900 x 550                                                  12.00
• 700 x 900 x 650                                                  15.00

Optional Arrangements Available:

• Digital temp. Indicator-cum-controller with computer data logger.
• Thermo-hygro-graph.
• Timer: 0-24 hrs.
• Day/night cycle.
• CO2 / Air mixture inlet nozzle.
• Audio-visual alarm.
• Automatic Voltage Stabilizer 3 KVA.

Humidity System (Steam) for BOD Incubator : JEQ-4(C1)

• BOD Incubator can be provided with humidity arrangement.
• Humidity is created by condensation of steam generated by heaters dipped in water.
• Humidity is controlled by imported humidistat from ambient to 95% ± 3% RH.

 

Product Details:

Item code: JEQ-4C

• B.O.D. (Bio-chemical Oxygen Demand) Incubator (Low Temp.): Double walled construction. Inner chamber made of anodized stainless steel/mild steel with self supports for wide range of shelf spacing. Supplied with two/three removable perforated shelves. Clear inner door of acrylic sheet allows inspection of material without disturbing chamber temperature. Outer double walled door is provided with magnetic gasket, lock & key and door operated lamp illumination. The cabinet is mounted on castors.
• Temperature is controlled by a microprocessor digital temperature controller cum indicator from 5°C to 50°C ± 1°C. Inner air circulating system provided for uniform temperature in the whole chamber. A silent sealed compressor with protective devices along with fan cooled condensing coil are placed below the chamber for safe and efficient working.
• Control panel provided at top of cabinet has three indicator lamps for mains, heating & cooling, voltmeter, and temp. Controller, cord-plug etc. and equipment is workable on 220 V AC 50 Hz single phase.
• Note: Use of a suitable Voltage Stabilizer is essential.
• Size of chamber in mms (WxHxD)           Capacity (cu ft.)
• 455 x 410 x 610                                                  4.00
• 500 x 800 x 415                                                  6.10
• 565 x 865 x 550                                                  10.00
• 650 x 900 x 550                                                  12.00
• 700 x 900 x 650                                                  15.00

Optional Arrangements Available:

• Digital temp. Indicator-cum-controller with computer data logger.
• Thermo-hygro-graph.
• Timer: 0-24 hrs.
• Day/night cycle.
• CO2 / Air mixture inlet nozzle.
• Audio-visual alarm.
• Automatic Voltage Stabilizer 3 KVA.

Humidity System (Steam) for BOD Incubator : JEQ-4(C1)

• BOD Incubator can be provided with humidity arrangement.
• Humidity is created by condensation of steam generated by heaters dipped in water.
• Humidity is controlled by imported humidistat from ambient to 95% ± 3% RH.

 

Product Details:

Item code: JEQ-4C

• B.O.D. (Bio-chemical Oxygen Demand) Incubator (Low Temp.): Double walled construction. Inner chamber made of anodized stainless steel/mild steel with self supports for wide range of shelf spacing. Supplied with two/three removable perforated shelves. Clear inner door of acrylic sheet allows inspection of material without disturbing chamber temperature. Outer double walled door is provided with magnetic gasket, lock & key and door operated lamp illumination. The cabinet is mounted on castors.
• Temperature is controlled by a microprocessor digital temperature controller cum indicator from 5°C to 50°C ± 1°C. Inner air circulating system provided for uniform temperature in the whole chamber. A silent sealed compressor with protective devices along with fan cooled condensing coil are placed below the chamber for safe and efficient working.
• Control panel provided at top of cabinet has three indicator lamps for mains, heating & cooling, voltmeter, and temp. Controller, cord-plug etc. and equipment is workable on 220 V AC 50 Hz single phase.
• Note: Use of a suitable Voltage Stabilizer is essential.
• Size of chamber in mms (WxHxD)           Capacity (cu ft.)
• 455 x 410 x 610                                                  4.00
• 500 x 800 x 415                                                  6.10
• 565 x 865 x 550                                                  10.00
• 650 x 900 x 550                                                  12.00
• 700 x 900 x 650                                                  15.00

Optional Arrangements Available:

• Digital temp. Indicator-cum-controller with computer data logger.
• Thermo-hygro-graph.
• Timer: 0-24 hrs.
• Day/night cycle.
• CO2 / Air mixture inlet nozzle.
• Audio-visual alarm.
• Automatic Voltage Stabilizer 3 KVA.

Humidity System (Steam) for BOD Incubator : JEQ-4(C1)

• BOD Incubator can be provided with humidity arrangement.
• Humidity is created by condensation of steam generated by heaters dipped in water.
• Humidity is controlled by imported humidistat from ambient to 95% ± 3% RH.

 

Product Details:

Item code: JEQ-4C

• B.O.D. (Bio-chemical Oxygen Demand) Incubator (Low Temp.): Double walled construction. Inner chamber made of anodized stainless steel/mild steel with self supports for wide range of shelf spacing. Supplied with two/three removable perforated shelves. Clear inner door of acrylic sheet allows inspection of material without disturbing chamber temperature. Outer double walled door is provided with magnetic gasket, lock & key and door operated lamp illumination. The cabinet is mounted on castors.
• Temperature is controlled by a microprocessor digital temperature controller cum indicator from 5°C to 50°C ± 1°C. Inner air circulating system provided for uniform temperature in the whole chamber. A silent sealed compressor with protective devices along with fan cooled condensing coil are placed below the chamber for safe and efficient working.
• Control panel provided at top of cabinet has three indicator lamps for mains, heating & cooling, voltmeter, and temp. Controller, cord-plug etc. and equipment is workable on 220 V AC 50 Hz single phase.
• Note: Use of a suitable Voltage Stabilizer is essential.
• Size of chamber in mms (WxHxD)           Capacity (cu ft.)
• 455 x 410 x 610                                                  4.00
• 500 x 800 x 415                                                  6.10
• 565 x 865 x 550                                                  10.00
• 650 x 900 x 550                                                  12.00
• 700 x 900 x 650                                                  15.00

Optional Arrangements Available:

• Digital temp. Indicator-cum-controller with computer data logger.
• Thermo-hygro-graph.
• Timer: 0-24 hrs.
• Day/night cycle.
• CO2 / Air mixture inlet nozzle.
• Audio-visual alarm.
• Automatic Voltage Stabilizer 3 KVA.

Humidity System (Steam) for BOD Incubator : JEQ-4(C1)

• BOD Incubator can be provided with humidity arrangement.
• Humidity is created by condensation of steam generated by heaters dipped in water.
• Humidity is controlled by imported humidistat from ambient to 95% ± 3% RH.

 

Product Details:

Item code: JEQ-4A

·         Bacteriological Incubator (Memmert type) has a standard double walled construction. Inner chamber made of stainless steel sheet and outer made of mild steel sheet finished in powder coated colour combinations. Gap filled with glass wool for temp. Insulation.

·         Double walled door with double glass window for observation in the chamber.

·         Temperature range 5°C above ambient to 80°C ±2°C controlled by a thermostat. L-shaped thermometer provided along with pilot lamps, on-off switch temp. Control knob etc. It works on 220V AC 50Hz single phase.

·         Common Chamber sizes in mms.     No. of trays

·         355 x 355 x 355                                               2

·         455 x 455 x 455                                               2

·         455 x 605 x 455                                               3

·         605 x 605 x 605                                               3

·         910 x 605 x 455                                               3

·         910 x 605 x 605                                               3

Optional:

·         Air circulating fan.

·         Timer 24 hours.

·         Digital Temp. Indicator-cum-Controller.

·         Digital Temp. Indicator-cum-Controller with computer data logger

Product Details:

Item code: JEQ-4A

·         Bacteriological Incubator (Memmert type) has a standard double walled construction. Inner chamber made of stainless steel sheet and outer made of mild steel sheet finished in powder coated colour combinations. Gap filled with glass wool for temp. Insulation.

·         Double walled door with double glass window for observation in the chamber.

·         Temperature range 5°C above ambient to 80°C ±2°C controlled by a thermostat. L-shaped thermometer provided along with pilot lamps, on-off switch temp. Control knob etc. It works on 220V AC 50Hz single phase.

·         Common Chamber sizes in mms.     No. of trays

·         355 x 355 x 355                                               2

·         455 x 455 x 455                                               2

·         455 x 605 x 455                                               3

·         605 x 605 x 605                                               3

·         910 x 605 x 455                                               3

·         910 x 605 x 605                                               3

Optional:

·         Air circulating fan.

·         Timer 24 hours.

·         Digital Temp. Indicator-cum-Controller.

·         Digital Temp. Indicator-cum-Controller with computer data logger

Product Details:

Item code: JEQ-4A

·         Bacteriological Incubator (Memmert type) has a standard double walled construction. Inner chamber made of stainless steel sheet and outer made of mild steel sheet finished in powder coated colour combinations. Gap filled with glass wool for temp. Insulation.

·         Double walled door with double glass window for observation in the chamber.

·         Temperature range 5°C above ambient to 80°C ±2°C controlled by a thermostat. L-shaped thermometer provided along with pilot lamps, on-off switch temp. Control knob etc. It works on 220V AC 50Hz single phase.

·         Common Chamber sizes in mms.     No. of trays

·         355 x 355 x 355                                               2

·         455 x 455 x 455                                               2

·         455 x 605 x 455                                               3

·         605 x 605 x 605                                               3

·         910 x 605 x 455                                               3

·         910 x 605 x 605                                               3

Optional:

·         Air circulating fan.

·         Timer 24 hours.

·         Digital Temp. Indicator-cum-Controller.

·         Digital Temp. Indicator-cum-Controller with computer data logger

Product Details:

Item code: JEQ-4A

·         Bacteriological Incubator (Memmert type) has a standard double walled construction. Inner chamber made of stainless steel sheet and outer made of mild steel sheet finished in powder coated colour combinations. Gap filled with glass wool for temp. Insulation.

·         Double walled door with double glass window for observation in the chamber.

·         Temperature range 5°C above ambient to 80°C ±2°C controlled by a thermostat. L-shaped thermometer provided along with pilot lamps, on-off switch temp. Control knob etc. It works on 220V AC 50Hz single phase.

·         Common Chamber sizes in mms.     No. of trays

·         355 x 355 x 355                                               2

·         455 x 455 x 455                                               2

·         455 x 605 x 455                                               3

·         605 x 605 x 605                                               3

·         910 x 605 x 455                                               3

·         910 x 605 x 605                                               3

Optional:

·         Air circulating fan.

·         Timer 24 hours.

·         Digital Temp. Indicator-cum-Controller.

·         Digital Temp. Indicator-cum-Controller with computer data logger

Product Details:

Item code: JEQ-4A

·         Bacteriological Incubator (Memmert type) has a standard double walled construction. Inner chamber made of stainless steel sheet and outer made of mild steel sheet finished in powder coated colour combinations. Gap filled with glass wool for temp. Insulation.

·         Double walled door with double glass window for observation in the chamber.

·         Temperature range 5°C above ambient to 80°C ±2°C controlled by a thermostat. L-shaped thermometer provided along with pilot lamps, on-off switch temp. Control knob etc. It works on 220V AC 50Hz single phase.

·         Common Chamber sizes in mms.     No. of trays

·         355 x 355 x 355                                               2

·         455 x 455 x 455                                               2

·         455 x 605 x 455                                               3

·         605 x 605 x 605                                               3

·         910 x 605 x 455                                               3

·         910 x 605 x 605                                               3

Optional:

·         Air circulating fan.

·         Timer 24 hours.

·         Digital Temp. Indicator-cum-Controller.

·         Digital Temp. Indicator-cum-Controller with computer data logger

Product Details:

Item code: JEQ-4C

• B.O.D. (Bio-chemical Oxygen Demand) Incubator (Low Temp.): Double walled construction. Inner chamber made of anodized stainless steel/mild steel with self supports for wide range of shelf spacing. Supplied with two/three removable perforated shelves. Clear inner door of acrylic sheet allows inspection of material without disturbing chamber temperature. Outer double walled door is provided with magnetic gasket, lock & key and door operated lamp illumination. The cabinet is mounted on castors.
• Temperature is controlled by a microprocessor digital temperature controller cum indicator from 5°C to 50°C ± 1°C. Inner air circulating system provided for uniform temperature in the whole chamber. A silent sealed compressor with protective devices along with fan cooled condensing coil are placed below the chamber for safe and efficient working.
• Control panel provided at top of cabinet has three indicator lamps for mains, heating & cooling, voltmeter, and temp. Controller, cord-plug etc. and equipment is workable on 220 V AC 50 Hz single phase.
• Note: Use of a suitable Voltage Stabilizer is essential.
• Size of chamber in mms (WxHxD)           Capacity (cu ft.)
• 455 x 410 x 610                                                  4.00
• 500 x 800 x 415                                                  6.10
• 565 x 865 x 550                                                  10.00
• 650 x 900 x 550                                                  12.00
• 700 x 900 x 650                                                  15.00

Optional Arrangements Available:

• Digital temp. Indicator-cum-controller with computer data logger.
• Thermo-hygro-graph.
• Timer: 0-24 hrs.
• Day/night cycle.
• CO2 / Air mixture inlet nozzle.
• Audio-visual alarm.
• Automatic Voltage Stabilizer 3 KVA.

Humidity System (Steam) for BOD Incubator : JEQ-4(C1)

• BOD Incubator can be provided with humidity arrangement.
• Humidity is created by condensation of steam generated by heaters dipped in water.
• Humidity is controlled by imported humidistat from ambient to 95% ± 3% RH.

 

Product Details:

Item code: JEQ-4C

• B.O.D. (Bio-chemical Oxygen Demand) Incubator (Low Temp.): Double walled construction. Inner chamber made of anodized stainless steel/mild steel with self supports for wide range of shelf spacing. Supplied with two/three removable perforated shelves. Clear inner door of acrylic sheet allows inspection of material without disturbing chamber temperature. Outer double walled door is provided with magnetic gasket, lock & key and door operated lamp illumination. The cabinet is mounted on castors.
• Temperature is controlled by a microprocessor digital temperature controller cum indicator from 5°C to 50°C ± 1°C. Inner air circulating system provided for uniform temperature in the whole chamber. A silent sealed compressor with protective devices along with fan cooled condensing coil are placed below the chamber for safe and efficient working.
• Control panel provided at top of cabinet has three indicator lamps for mains, heating & cooling, voltmeter, and temp. Controller, cord-plug etc. and equipment is workable on 220 V AC 50 Hz single phase.
• Note: Use of a suitable Voltage Stabilizer is essential.
• Size of chamber in mms (WxHxD)           Capacity (cu ft.)
• 455 x 410 x 610                                                  4.00
• 500 x 800 x 415                                                  6.10
• 565 x 865 x 550                                                  10.00
• 650 x 900 x 550                                                  12.00
• 700 x 900 x 650                                                  15.00

Optional Arrangements Available:

• Digital temp. Indicator-cum-controller with computer data logger.
• Thermo-hygro-graph.
• Timer: 0-24 hrs.
• Day/night cycle.
• CO2 / Air mixture inlet nozzle.
• Audio-visual alarm.
• Automatic Voltage Stabilizer 3 KVA.

Humidity System (Steam) for BOD Incubator : JEQ-4(C1)

• BOD Incubator can be provided with humidity arrangement.
• Humidity is created by condensation of steam generated by heaters dipped in water.
• Humidity is controlled by imported humidistat from ambient to 95% ± 3% RH.

 

Product Details:

Item code: JEQ-4C

• B.O.D. (Bio-chemical Oxygen Demand) Incubator (Low Temp.): Double walled construction. Inner chamber made of anodized stainless steel/mild steel with self supports for wide range of shelf spacing. Supplied with two/three removable perforated shelves. Clear inner door of acrylic sheet allows inspection of material without disturbing chamber temperature. Outer double walled door is provided with magnetic gasket, lock & key and door operated lamp illumination. The cabinet is mounted on castors.
• Temperature is controlled by a microprocessor digital temperature controller cum indicator from 5°C to 50°C ± 1°C. Inner air circulating system provided for uniform temperature in the whole chamber. A silent sealed compressor with protective devices along with fan cooled condensing coil are placed below the chamber for safe and efficient working.
• Control panel provided at top of cabinet has three indicator lamps for mains, heating & cooling, voltmeter, and temp. Controller, cord-plug etc. and equipment is workable on 220 V AC 50 Hz single phase.
• Note: Use of a suitable Voltage Stabilizer is essential.
• Size of chamber in mms (WxHxD)           Capacity (cu ft.)
• 455 x 410 x 610                                                  4.00
• 500 x 800 x 415                                                  6.10
• 565 x 865 x 550                                                  10.00
• 650 x 900 x 550                                                  12.00
• 700 x 900 x 650                                                  15.00

Optional Arrangements Available:

• Digital temp. Indicator-cum-controller with computer data logger.
• Thermo-hygro-graph.
• Timer: 0-24 hrs.
• Day/night cycle.
• CO2 / Air mixture inlet nozzle.
• Audio-visual alarm.
• Automatic Voltage Stabilizer 3 KVA.

Humidity System (Steam) for BOD Incubator : JEQ-4(C1)

• BOD Incubator can be provided with humidity arrangement.
• Humidity is created by condensation of steam generated by heaters dipped in water.
• Humidity is controlled by imported humidistat from ambient to 95% ± 3% RH.

 

Product Details:

Item code: JEQ-4C

• B.O.D. (Bio-chemical Oxygen Demand) Incubator (Low Temp.): Double walled construction. Inner chamber made of anodized stainless steel/mild steel with self supports for wide range of shelf spacing. Supplied with two/three removable perforated shelves. Clear inner door of acrylic sheet allows inspection of material without disturbing chamber temperature. Outer double walled door is provided with magnetic gasket, lock & key and door operated lamp illumination. The cabinet is mounted on castors.
• Temperature is controlled by a microprocessor digital temperature controller cum indicator from 5°C to 50°C ± 1°C. Inner air circulating system provided for uniform temperature in the whole chamber. A silent sealed compressor with protective devices along with fan cooled condensing coil are placed below the chamber for safe and efficient working.
• Control panel provided at top of cabinet has three indicator lamps for mains, heating & cooling, voltmeter, and temp. Controller, cord-plug etc. and equipment is workable on 220 V AC 50 Hz single phase.
• Note: Use of a suitable Voltage Stabilizer is essential.
• Size of chamber in mms (WxHxD)           Capacity (cu ft.)
• 455 x 410 x 610                                                  4.00
• 500 x 800 x 415                                                  6.10
• 565 x 865 x 550                                                  10.00
• 650 x 900 x 550                                                  12.00
• 700 x 900 x 650                                                  15.00

Optional Arrangements Available:

• Digital temp. Indicator-cum-controller with computer data logger.
• Thermo-hygro-graph.
• Timer: 0-24 hrs.
• Day/night cycle.
• CO2 / Air mixture inlet nozzle.
• Audio-visual alarm.
• Automatic Voltage Stabilizer 3 KVA.

Humidity System (Steam) for BOD Incubator : JEQ-4(C1)

• BOD Incubator can be provided with humidity arrangement.
• Humidity is created by condensation of steam generated by heaters dipped in water.
• Humidity is controlled by imported humidistat from ambient to 95% ± 3% RH.

 

Product Details:

Item code: JEQ-4C

• B.O.D. (Bio-chemical Oxygen Demand) Incubator (Low Temp.): Double walled construction. Inner chamber made of anodized stainless steel/mild steel with self supports for wide range of shelf spacing. Supplied with two/three removable perforated shelves. Clear inner door of acrylic sheet allows inspection of material without disturbing chamber temperature. Outer double walled door is provided with magnetic gasket, lock & key and door operated lamp illumination. The cabinet is mounted on castors.
• Temperature is controlled by a microprocessor digital temperature controller cum indicator from 5°C to 50°C ± 1°C. Inner air circulating system provided for uniform temperature in the whole chamber. A silent sealed compressor with protective devices along with fan cooled condensing coil are placed below the chamber for safe and efficient working.
• Control panel provided at top of cabinet has three indicator lamps for mains, heating & cooling, voltmeter, and temp. Controller, cord-plug etc. and equipment is workable on 220 V AC 50 Hz single phase.
• Note: Use of a suitable Voltage Stabilizer is essential.
• Size of chamber in mms (WxHxD)           Capacity (cu ft.)
• 455 x 410 x 610                                                  4.00
• 500 x 800 x 415                                                  6.10
• 565 x 865 x 550                                                  10.00
• 650 x 900 x 550                                                  12.00
• 700 x 900 x 650                                                  15.00

Optional Arrangements Available:

• Digital temp. Indicator-cum-controller with computer data logger.
• Thermo-hygro-graph.
• Timer: 0-24 hrs.
• Day/night cycle.
• CO2 / Air mixture inlet nozzle.
• Audio-visual alarm.
• Automatic Voltage Stabilizer 3 KVA.

Humidity System (Steam) for BOD Incubator : JEQ-4(C1)

• BOD Incubator can be provided with humidity arrangement.
• Humidity is created by condensation of steam generated by heaters dipped in water.
• Humidity is controlled by imported humidistat from ambient to 95% ± 3% RH.

 

Product Details:

Item code: JEQ-4C

• B.O.D. (Bio-chemical Oxygen Demand) Incubator (Low Temp.): Double walled construction. Inner chamber made of anodized stainless steel/mild steel with self supports for wide range of shelf spacing. Supplied with two/three removable perforated shelves. Clear inner door of acrylic sheet allows inspection of material without disturbing chamber temperature. Outer double walled door is provided with magnetic gasket, lock & key and door operated lamp illumination. The cabinet is mounted on castors.
• Temperature is controlled by a microprocessor digital temperature controller cum indicator from 5°C to 50°C ± 1°C. Inner air circulating system provided for uniform temperature in the whole chamber. A silent sealed compressor with protective devices along with fan cooled condensing coil are placed below the chamber for safe and efficient working.
• Control panel provided at top of cabinet has three indicator lamps for mains, heating & cooling, voltmeter, and temp. Controller, cord-plug etc. and equipment is workable on 220 V AC 50 Hz single phase.
• Note: Use of a suitable Voltage Stabilizer is essential.
• Size of chamber in mms (WxHxD)           Capacity (cu ft.)
• 455 x 410 x 610                                                  4.00
• 500 x 800 x 415                                                  6.10
• 565 x 865 x 550                                                  10.00
• 650 x 900 x 550                                                  12.00
• 700 x 900 x 650                                                  15.00

Optional Arrangements Available:

• Digital temp. Indicator-cum-controller with computer data logger.
• Thermo-hygro-graph.
• Timer: 0-24 hrs.
• Day/night cycle.
• CO2 / Air mixture inlet nozzle.
• Audio-visual alarm.
• Automatic Voltage Stabilizer 3 KVA.

Humidity System (Steam) for BOD Incubator : JEQ-4(C1)

• BOD Incubator can be provided with humidity arrangement.
• Humidity is created by condensation of steam generated by heaters dipped in water.
• Humidity is controlled by imported humidistat from ambient to 95% ± 3% RH.

 

Product Details:

Item code: JEQ-ETO

·         Capacity: 300ltr Ltr/hr

·         Material: SS 304

·         Equipment Materials: SS 304

·         Display Type: Digital

·         Leakage testing function to eliminate and ensure any leakage possibility in ETO sterilizer.

·         In the ETO Sterilizer, automatic cycle progression can be seamlessly achieved through distinct phases: vacuum, exposure, sterilizing, and aerating.

·         The negative pressure within the chamber prevents the gas from entering the operating area, ensuring safety and containment.

·         One of the standout features of the ETO Sterilizer is its intuitive control panel screen, which accurately displays the various phases of the sterilization process. This allows for precise monitoring and control, ensuring optimal efficiency and effectiveness throughout each stage of operation.

·         Strict control over vacuum levels, chamber temperature, and exposure duration (aeration time) ensures the ETO Sterilizer’s optimal performance, guaranteeing thorough and effective sterilization.

·         Chamber and cabinet made of high quality stainless steel.

·         Aeration system to safeguard the operator from exposure of sterilant/ETO Gas.

Uses:

·         ETO sterilization plays a vital role in ensuring sterility for a wide range of medical and surgical devices. This low-temperature process is particularly valuable for:

·         Heat-sensitive medical devices: Plastic instruments, electronics within devices, and temperature sensitive materials can all be safely sterilized with ETO without risk of damage.

·         Impenetrable materials: ETO gas effectively penetrates complex shapes and reaches areas inaccessible to other methods like steam sterilization.

·         Incompatible materials: Certain materials simply cannot withstand the harsh conditions of steam sterilization. ETO offers a safe alternative for these delicate components.

Product Details:

Item code: JEQ-ETO

·         Capacity: 300ltr Ltr/hr

·         Material: SS 304

·         Equipment Materials: SS 304

·         Display Type: Digital

·         Leakage testing function to eliminate and ensure any leakage possibility in ETO sterilizer.

·         In the ETO Sterilizer, automatic cycle progression can be seamlessly achieved through distinct phases: vacuum, exposure, sterilizing, and aerating.

·         The negative pressure within the chamber prevents the gas from entering the operating area, ensuring safety and containment.

·         One of the standout features of the ETO Sterilizer is its intuitive control panel screen, which accurately displays the various phases of the sterilization process. This allows for precise monitoring and control, ensuring optimal efficiency and effectiveness throughout each stage of operation.

·         Strict control over vacuum levels, chamber temperature, and exposure duration (aeration time) ensures the ETO Sterilizer’s optimal performance, guaranteeing thorough and effective sterilization.

·         Chamber and cabinet made of high quality stainless steel.

·         Aeration system to safeguard the operator from exposure of sterilant/ETO Gas.

Uses:

·         ETO sterilization plays a vital role in ensuring sterility for a wide range of medical and surgical devices. This low-temperature process is particularly valuable for:

·         Heat-sensitive medical devices: Plastic instruments, electronics within devices, and temperature sensitive materials can all be safely sterilized with ETO without risk of damage.

·         Impenetrable materials: ETO gas effectively penetrates complex shapes and reaches areas inaccessible to other methods like steam sterilization.

·         Incompatible materials: Certain materials simply cannot withstand the harsh conditions of steam sterilization. ETO offers a safe alternative for these delicate components.

Product Details:

Item code: MTK-8003

·         Inner chamber jacket and boiler is made of stainless steel. Sterilization cycle is controlled by three way valve or multi-port valve stainless steel. It is fitted with automatic pressure control switch, infuses piezo stat, safety valve, pressure gauge, pressure release valve, water level indicator with cord & plug. Lid is made of mild steel lined with S.S. duly polished. Size

·         Pressure sterilizer,

·         Horizontal,

·         Sterilizing temperature adjustable up to 135 degree centigrade

·         Inside dimensions 220x220x450mm

·         Fully automatic operation;

·         Power 220V, 50/60Hz

Product Details:

Item code: MTK-8003

·         Inner chamber jacket and boiler is made of stainless steel. Sterilization cycle is controlled by three way valve or multi-port valve stainless steel. It is fitted with automatic pressure control switch, infuses piezo stat, safety valve, pressure gauge, pressure release valve, water level indicator with cord & plug. Lid is made of mild steel lined with S.S. duly polished. Size

·         Pressure sterilizer,

·         Horizontal,

·         Sterilizing temperature adjustable up to 135 degree centigrade

·         Inside dimensions 220x220x450mm

·         Fully automatic operation;

·         Power 220V, 50/60Hz

Product Details:

Item code: MTK-8003

·         Inner chamber jacket and boiler is made of stainless steel. Sterilization cycle is controlled by three way valve or multi-port valve stainless steel. It is fitted with automatic pressure control switch, infuses piezo stat, safety valve, pressure gauge, pressure release valve, water level indicator with cord & plug. Lid is made of mild steel lined with S.S. duly polished. Size

·         Pressure sterilizer,

·         Horizontal,

·         Sterilizing temperature adjustable up to 135 degree centigrade

·         Inside dimensions 220x220x450mm

·         Fully automatic operation;

·         Power 220V, 50/60Hz

Product Details:

Item code: MTK-8003

·         Inner chamber jacket and boiler is made of stainless steel. Sterilization cycle is controlled by three way valve or multi-port valve stainless steel. It is fitted with automatic pressure control switch, infuses piezo stat, safety valve, pressure gauge, pressure release valve, water level indicator with cord & plug. Lid is made of mild steel lined with S.S. duly polished. Size

·         Pressure sterilizer,

·         Horizontal,

·         Sterilizing temperature adjustable up to 135 degree centigrade

·         Inside dimensions 220x220x450mm

·         Fully automatic operation;

·         Power 220V, 50/60Hz

Product Details:

Item code: MTK-8003

·         Inner chamber jacket and boiler is made of stainless steel, mild steel. Sterilization cycle is controlled by three way valve or multi-port valve stainless steel. It is fitted with automatic pressure control switch, infuses piezo stat, safety valve, pressure gauge, pressure release valve, water level indicator with cord & plug. Lid is made of mild steel lined with S.S. duly polished. Size

·         Pressure sterilizer,

·         Horizontal,

·         Sterilizing temperature adjustable up to 135 degree centigrade

·         Inside dimensions 220x220x450mm

·         Fully automatic operation;

·         Power 220V, 50/60Hz

Product Details:

Item code: MTK-8003

·         Inner chamber jacket and boiler is made of stainless steel, mild steel. Sterilization cycle is controlled by three way valve or multi-port valve stainless steel. It is fitted with automatic pressure control switch, infuses piezo stat, safety valve, pressure gauge, pressure release valve, water level indicator with cord & plug. Lid is made of mild steel lined with S.S. duly polished. Size

·         Pressure sterilizer,

·         Horizontal,

·         Sterilizing temperature adjustable up to 135 degree centigrade

·         Inside dimensions 220x220x450mm

·         Fully automatic operation;

·         Power 220V, 50/60Hz

Product Details:

Item code: MTK-8003

·         Inner chamber jacket and boiler is made of stainless steel. Sterilization cycle is controlled by three way valve or multi-port valve stainless steel. It is fitted with automatic pressure control switch, infuses piezo stat, safety valve, pressure gauge, pressure release valve, water level indicator with cord & plug. Lid is made of mild steel lined with S.S. duly polished. Size

·         Pressure sterilizer,

·         Horizontal,

·         Sterilizing temperature adjustable up to 135 degree centigrade

·         Inside dimensions 220x220x450mm

·         Fully automatic operation;

·         Power 220V, 50/60Hz

Product Details:

Item code: MTK-8003

·         Inner chamber jacket and boiler is made of stainless steel. Sterilization cycle is controlled by three way valve or multi-port valve stainless steel. It is fitted with automatic pressure control switch, infuses piezo stat, safety valve, pressure gauge, pressure release valve, water level indicator with cord & plug. Lid is made of mild steel lined with S.S. duly polished. Size

·         Pressure sterilizer,

·         Horizontal,

·         Sterilizing temperature adjustable up to 135 degree centigrade

·         Inside dimensions 220x220x450mm

·         Fully automatic operation;

·         Power 220V, 50/60Hz

Product Details:

Item code: EQ-4S

·         Stability Chamber Microprocessor Control are microprocessor controlled chambers with soft touch keyboard for fast and accurate setting of various parameters. Just set the temperature, humidity & time and the system runs automatically. All the parameters are digitally displayed and reproducible.

Special Features:

·         Temperature accurately controlled through microprocessor based controller.

·         Automatic On / Off of the compressor according to need of process to reach & maintain the set values.

·         Chamber illumination with fluorescent or ultra violet lights.

·         Audio Visual alarm warning of temp. Variation.

·         User’s friendly Microprocessor Design/Operation.

Additional Features:

·         Humidity accurately controlled through microprocessor controller in addition to temperature.

·         Direct display of humidity in % RHQ. Audio visual alarm warning of low water levels & door opening.

·         Humidity: 40% to 95% ± 3%.

Optional:

·         Chart Recorder weekly.

·         RS-232C interface available for humidity control through personal computer.

·         Digital temp. Indicator-cum-controller with computer data logger.

·         Cyclic timer for regulating illumination conditions.

·         Automatic Voltage Stabilizer 3KVA.

Product Details:

Item code: EQ-4S

·         Stability Chamber Microprocessor Control are microprocessor controlled chambers with soft touch keyboard for fast and accurate setting of various parameters. Just set the temperature, humidity & time and the system runs automatically. All the parameters are digitally displayed and reproducible.

Special Features:

·         Temperature accurately controlled through microprocessor based controller.

·         Automatic On / Off of the compressor according to need of process to reach & maintain the set values.

·         Chamber illumination with fluorescent or ultra violet lights.

·         Audio Visual alarm warning of temp. Variation.

·         User’s friendly Microprocessor Design/Operation.

Additional Features:

·         Humidity accurately controlled through microprocessor controller in addition to temperature.

·         Direct display of humidity in % RHQ. Audio visual alarm warning of low water levels & door opening.

·         Humidity: 40% to 95% ± 3%.

Optional:

·         Chart Recorder weekly.

·         RS-232C interface available for humidity control through personal computer.

·         Digital temp. Indicator-cum-controller with computer data logger.

·         Cyclic timer for regulating illumination conditions.

·         Automatic Voltage Stabilizer 3KVA.

Product Details:

Item code: EQ-4S

·         Stability Chamber Microprocessor Control are microprocessor controlled chambers with soft touch keyboard for fast and accurate setting of various parameters. Just set the temperature, humidity & time and the system runs automatically. All the parameters are digitally displayed and reproducible.

Special Features:

·         Temperature accurately controlled through microprocessor based controller.

·         Automatic On / Off of the compressor according to need of process to reach & maintain the set values.

·         Chamber illumination with fluorescent or ultra violet lights.

·         Audio Visual alarm warning of temp. Variation.

·         User’s friendly Microprocessor Design/Operation.

Additional Features:

·         Humidity accurately controlled through microprocessor controller in addition to temperature.

·         Direct display of humidity in % RHQ. Audio visual alarm warning of low water levels & door opening.

·         Humidity: 40% to 95% ± 3%.

Optional:

·         Chart Recorder weekly.

·         RS-232C interface available for humidity control through personal computer.

·         Digital temp. Indicator-cum-controller with computer data logger.

·         Cyclic timer for regulating illumination conditions.

·         Automatic Voltage Stabilizer 3KVA.