Chemical Reaction Engineering Lab

Product Details:

SPIN INNING BASKET REACTOR APPARATUS
CODE: MTK-9809SP

Any catalytic liquid-liquid or liquid-gas reaction involving the use of a catalyst placed in basket can be studies in this set-up. Kinetic parameter of a specific reaction can be estimated & parametric studies can be conducted. The set-up consists of a reactor centrally having one spinning basket derived through a variable speed motor. The metered flow of reactant from feed tank is fed to the reactor at the bottom. The set-up can be used as batch wise of as continuous type. Sampling points are provided for analysis. Port connection for gas inlet is provided at the bottom of the reactor

Experimentation/Learning Objectives

•       To determine the kinetic parameters for a given reaction

Utilities Required

•       Electricity Supply: Single Phase, 220 V AC, 50 Hz, 5-15 Amp combined socket with earth connection. Earth voltage should be less than 5 volts.

•       Compressed air supply@1 Bar.

•       Water Supply.

•       Floor Drain.

•       Floor Area Required: 1.0 m x 0.75 m.

•       Instruments, Laboratory Glassware and Chemicals required for analysis as per the system adopted

Technical Details

·       Reactor Vessel: Material Stainless Steel Effective Volume: 1000 ml.

•       Basket: Material Stainless Steel, Fitted with appropriate Stainless Steel.

•       Drive for Basket: DC Motor with Thyristor controlled DC Drive for Variable Speed.

•       Packing: Catalyst

•       Feed Tank (1Nos.): Material Stainless Steel, Capacity 10 Ltrs.

•       Flow Measurement: By Rotameter

•       Pressure regulator: Range 0-2 kg/cm²

•       Pressure Gauge: Bourdon Type, 0-2 kg/cm²

•       Receiver: Material Stainless Steel, Capacity 10 Ltrs.

•       Piping: Stainless Steel and PVC.

•       Hot water Circulation: Magnetic Pump of Poly propylene (in outer Jacket) to circulate Hot Water maximum working temp. 85°C

•       Hot water tank: Made of Stainless Steel, Double wall, insulated with Ceramic Wool. Capacity: 10-15 ltrs.

Product Details:

LIQUID PHASE CHEMICAL REACTOR APPARATUS

CODE: MTK-9829LPC

Specification:

Description

·       Present set-up consists of a reactor vessel fitted with variable speed agitator and detachable baffles. This unit is designed to study chemical kinetics. Reactants are fed to the reactor, using pump and flow is regulated and monitored by individual Rotameter. An adjustable overflow device is provided in the reactor to conduct the experiment on different reactor volume. A Stainless Steel Coil is immersed in the reactor through which the hot water supply is circulated. Temperature of the hot water is controlled by means of Temperature Controller and it enables the students to enhance the experimentation capabilities

Experimentation/Learning Objectives

·       To study the chemical kinetics.

•       To study the effect of residence time.

•       To study the effect of mixing speed.

•       To study the effect of temperature on chemical reaction.

Utilities Required

•       Electricity Supply: Single Phase, 220 V AC, 50 Hz, 5-15 Amp combined socket with earth connection. Earth voltage should be less than 5 volts.

•       Water Supply

•       Floor Drain.

•       Floor Area Required: 1.5 m x 1 m.

•       Instruments, Laboratory wares and Chemicals required for analysis as per the system adopter

Technical Details

·       Reactor: Material SS, Capacity (1-2) Ltrs.

•       Agitator: Variable speed with speed control facility from 0 – 150 RPM.

•       Impeller: 4 square bladed (1 No.), Material- Stainless Steel.

•       Baffles: Detachable.

•       Piping: PVC.

•       Feed Tank (2Nos.): Material Stainless Steel, Capacity 20 Ltrs. Each

•       Discharge Tank (1No.): Material PVC, Capacity 40 Ltrs.

•       Water Bath: Material Stainless Steel, Double wall, insulated with Ceramic Wool.

•       Heater: Nichrome wire Heater

•       Pumps (3Nos.): 2 Nos. (For Chemical), 1 No. (For hot water circulation).

 

Additional Information:

• Item Code: MTK-9829LPC
• Production Capacity: 5
• Delivery Time: 1-2 week

Product Details:

ADIABATIC BATCH REACTOR APPARATUS

CODE: MTK-9820ABR

Specification:

·       An adiabatic batch reactor is a closed system with no input and output streams. This reactor is operated under conditions like adiabatic (Temperature of Reaction Mass keep on changing), perfectly mixed (composition of the reaction mixture is uniform throughout), and constant volume (volume of the reaction mixture within the reactor remains constant, there is no appreciable change in the density of reaction mass). This setup is used to study a catalytic homogeneous reaction under adiabatic conditions. The set-up consists of a Dewar flask of a capacity of 1 lit. Fitted with a stirrer. The flask is double insulated by ceramic wool insulation. Temp. is measured by a digital temp indicator. The whole setup is mounted on a rigid M.S. frame.

Experimentation/Learning Objectives

•      To study the decomposition of Hydrogen Peroxide with water in presence of an Iodide catalyst.

•      To predict the degree of conversion from time-temperature data

Utilities Required

·       Hz, 5-15 Amp combined socket with earth connection. Earth voltage should be less than 5 volts.

•      Floor Area Required: 1.0 m x 1.0 m.

•      Instruments, Laboratory Glassware, and Chemicals required for analysis as per the system adopted.

Product Specification

·       Material: Stainless Steel

·       Capacity: 1 litre

·       Country of Origin: Made in India

·       Temp. Indicator: Digital

·       Floor Area Required: 1.0 m x 1.0 m

Additional Information:

• Item Code: MTK-9820ABR
• Production Capacity: 3
• Delivery Time: 1 week

Product Details:

R.T.D. STUDIES IN CONTINUOUS STIRRED TANK REACTOR APPARATUS

CODE: MTK-9545CSA 

Specification:

Description:

·       Real reactors do not satisfy the idealized flow patterns, back mix flow or plug flow deviation from ideality can be due to channeling of fluid through the vessel, recycling of fluid within the vessel or due to the presence of stagnant region or pockets of fluid in the vessel. To predict the exact behavior of a vessel as a Chemicals reactor, RTD or stimulus response technique is used. The setup consists of one feed tank through which water is fed to the reactor. The flow rate can be varied by changing the speed of peristaltic pump. The continuously stirred tank reactor made of Stainless Steel is provided for understanding the R.T.D. characteristics.

EXPERIMENTATION:

·       To plot RTD curve for a CSTR. Using pulse tracer.

·       To determine the Dispersion No.

Product Specifications

·       Material: Metal

·       Power: 500 Watt (w)

·       Voltage: 220 Volt (v)

·       Usage For: College and University

·       Equipment Materials: SS

Product Details:

 

UV-PHOTO REACTOR APPARATUS

CODE: MTK-9747MS 

Specification:

Description

·      The set-up is used to study a photo catalytic reaction using a UV source provided in the form of an UV tube. This set-up can be used to carry out a parameter study under batch/continuous flow condition. A photo catalyst like TiO2 can be used. This set-up can also be used to study the mineralization of liquid effluent industrial streams & for purification of water. The set-up consists of reactor with inside reflecting surface. An UV source surrounding glass/quartz cylinder is placed centrally in the reactor

Utilities Required

•      Electricity Supply: Single Phase, 220 V AC, 50 Hz, 5-15 Amp combined socket with earth connection. Earth voltage should be less than 5 volts.

•      Water Supply

•      Floor Drain.

•      Instruments, Laboratory wares and Chemicals required for analysis as per the system adopted

 

 

Technical Details

·       UV Source: 30 W / 16 W

•      Reactor: With inside reflective surface. Effective volume of reactor 1-1.5 Ltrs.

•     Feed Tank: Material Stainless Steel, Capacity 5 Ltrs.

•     Feed circulation: Magnetic Pump made of Polypropylene. Maximum working temperature 80°C.

•     Flow Measurement: By Rotameter

 

 

Additional Information:

• Item Code: MTK-9868UV
• Production Capacity: 6
• Delivery Time: 2 WEEKS

Product Details:

ISOTHERMAL BATCH REACTOR APPARATUS

MTK-9857BI 

Specification:

Description:

·      A batch reactor is a closed system with no input and output streams. A batch reactor can operate under conditions like Isothermal (Temperature of Reaction Mass remains constant), perfectly mixed (composition of reaction mixture is uniform throughout), and constant volume (volume of the reaction mixture within the reactor remains constant, there is no appreciable change in the density of reaction mass). This set-up is used to study a non-catalytic homogeneous reaction under isothermal condition. The set up consists of a Reactor fitted in a constant temperature water bath. One stirrer is fitted for mixing the reactants in reactor and other is fitted in water bath to keep the uniform temperature throughout in the bath. The temperature of bath can be maintained from ambient to 90C with the help of Digital Temperature indicator Cum Controller. Samples can be taken out with the help of a sampling pipette.

 

EXPERIMENTATION:

·      To study the progress of a Chemicals reaction and determine the kinetic parameters.

·      To determine the effect of temperature on Reaction Rate Constant.

Product Details:

·      Power: 500 Watt (w)

·      Voltage: 9 240 Volt (v)

·      Material: Metal

·      Usage: Laboratory

·      Equipment Materials: SS

Additional Information:

• Item Code: MTK-9857BI
• Production Capacity: 3
• Delivery Time: 2 WEEKS