Pharmaceutical Laboratory Equipment

Product Details:

DISSOLUTION RATE TEST EQUIPMENT : P-D3A

• Microprocssor based with digital temperature controller.
• Digital revolution with R. P. M. Setting.
• Digital temperature controller.
• Digital timer.
• Motorised up and down of the total stiring unit.
• A stainless steel basket is provided to hold samples.
• The machine works on 220V AC 50Hz single phase.

A. Three tests.
B. Six tests.
C. Eight tests.

Additional Information:

• Item Code: P-D3A

Product Details:

DISSOLUTION RATE TEST EQUIPMENT : P-D3M

System is equipped with 4 line alphanumeric LCD display with backlit and 19 soft touch membrane type keys that provides a convenient interface for entering the data. Independent stirrer and platform keys on the front panel allow the user to easily start/stop stirrer movement or displacement of platform in the required direction at any time.
The instrument has the storage facility for 200 samples. The samples being analyzed are automatically stored in the memory in different batch and sample numbers. The system has three programming modes i.e. Routine, Sustain and Control mode. It has the facility for setting up 20 different test methods using Routine and Sustain modes which are retained in the memory even when the power is switched OFF. Provision has also been made for attachment of any dot matrix printer with centronics interface so that any of the stored setups/results can be printed.
The unit is provided with dissolution vessel with cover, having necessary arrangement to hold temperature sensor and the same is placed in the sturdy, acrylic water bath. The large spread out stainless steel heater ensures perfectly uniform heating. The instrument has dual channel temperature system with sensors to monitor the test temperature of dissolution vessel as well as that of the water bath.

Features :

• 6 Station.
• Complies with USP, IP specifications.
• Extremely Useful for Pharmaceutical Labs.
• Highly Accurate and Easy to Operate.
• Programmable Stirrer Speed Control i.e. (25 – 200 RPM).
• 20 x 4 Line Alphanumeric LCD with Backlit.
• 19 Soft Touch Membrane Type Keys.
• Three Programming Modes i.e. Routine, Sustain and Control.
• 20 Independent Programmable Setups for Routine and Sustain Mode with Storage Facility.
• 200 Samples Storage Facility.
• Printer Attachment Facility.
• Audio Visual Indicators for System Status.
• Easy to Empty & Clean the Water bath with Bottom Drainage.
• Continuation of Last Sample Run in case of Power Failure.

Specification :

Accessories :

• Main Unit with Acrylic Tank and Rectangular Cover Plate and Water Bath Temperature Sensor (T1).
  External Temperature Sensor (T2) for Vessel.
• Reaction Vessel capacity 1000 ml 8 NOS.
• Round Acrylic Cover Plate with Hole and a large slit 8 NOS.
• S.S. Paddle, S.S Wire Mesh Basket 8 NOS).
• Glass pipettes with rubber bellows.
• Mains Lead.
• Instruction Manual.
• Dust Cover.

Additional Information:

• Item Code: P-D3B
• Production Capacity: 250
• Delivery Time: 2 WEEKS
• Packaging Details: BOX/ CARTON

Product Details:

VERTICAL ELECTROPHORESIS APPARATUS : EM-41

It is required in Biotechnology, Molecular Biology applications in colleges, Universities, Research Institutes.
It is meant for protein characterization.
The unit is jointless, moulded of transparent Polycarbonate to avoid leakage. The unit is based on Acrylic sheet fitted with 3 levelling screws. Complete with Acrylic cover.

• Dimentions (Outer) (L*W*H) 15x18x15mm
• Gel Size (cm) 8×7 (1Gel)
• Buffer Required (ml) 100 + 150
• Platinum Electrodes 2 Nos.

Supply Complete with standard accessories

• Wires
• Glass plate-1 and 1 notched rectangular Total 2nos.
• One set spacers of 1.0mm, 1.5mm – 4 pcs. each
• 4 sets of Nylon moulded combs of 7 wells & 10 wells in 0.1mm and 1.5mm thickness.
• Silicon Gasket – 1 No

Product Details:

BOTTLE CAP SEALING MACHINE HAND OPERATED : P-B4

Bottle Cap Sealing Machine : Portable, hand operated equipment with two extra cap holders of different sizes. Totally casted machine hand operated. Hand operated.

P-B4E : –do– electrical operated (mounted on heavy stand.)

Additional Information:

• Item Code: P-B4

Product Details:

Item code: P-C8

Small Animal Cage: Made of steel body duly powder coated or stainless steel. With feeding bottle and feeding bowl, the removable waste collecting tray below the cage size :

• 18 x 18 x 14
• 18 x 18 x 20
• 24 x 24 x 18

Note : Rack for above at extra cost.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Product Details:

DISSOLUTION RATE TEST EQUIPMENT : P-D3

Dissolution Rate Test Equipment : This equipment is used to determine dissolution rate of tablets and complies with US-Pharmacopoeia-XVII standard with water constantly moving and holding temp. constant at 37°C ± 0. 5°C throughout the test.
A 1000 ml capacity cylindrical vessel with flanges near the top is provided to accept 4 parts cover.
Motor speed is controlled by a speed controller within a range of 25 to 150 RPM.
A stainless steel basket is provided to hold samples.
The machine works on 220V AC 50Hz single phase.

A. Single test
B. Double test
C. Combined unit for 3 tests.

Additional Information:

• Item Code: P-D3
• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: As Per Requirement

Product Details:

DISSOLUTION RATE TEST EQUIPMENT : P-D3-1

Same as P-D3 But with following parameter:

• Digital temperature controller cum indicator.
• Digital RPM indicator.

Avaialble in:

A. Single test.
B. Combined unit for 3 tests.
C. Combined unit for 6 tests.

Additional Information:

• Item Code: P-D3-1

Product Details:

MIXING VAT WITH STIRRER : P-M4

A 3 litre capacity vat with lid made of stainless steel sheet fitted on a mild steel stout stand of circular shape provided with rubber feet.
A suitable shaft with blade for stirring provided on a suitable stand with height adjustment arrangement. A fractional H.P. Motor workable on 220V AC 50Hz single phase, indicator, plug, and cord provided.

Additional Information:

• Item Code: P-M4

Product Details:

Tablet Press Machine : ETP-204

Tablet Making Machine (Hand operated) : Useful for making tablets upto 100 mg. Size of punch & die of 9 mm. Automatic compression and ejection device has been provided, actuated by revolution of the wheel drive. Feed and removal of tablets has also been made automatic. Eccentric pressure system has been applied for easy setting of thickness and hardness of tablets. A stainless steel hopper has been given.The unit has been mounted on a mild steel fabrication. Completed with one die and punch set made of chromium steel.
Tablet Press machine with Electrically operated .

Additional Information:

• Item Code: PT1-B
• Production Capacity: Ready Stock
• Delivery Time: As Per Requirement

Product Details:

GRANULATING SIEVES : P-G2

Granulating Sieves :

• Wooden frame sizes : 9″ x 7″ & 10″ x 8″.
• Reinforced by steel strips.

Additional Information:

• Item Code: P-G2

Product Details:

LIPSTICK MOLDS : P-L2

Lipstick Molds is made of brass available in:

• 4 holes
• 6 holes.

Additional Information:

• Item Code: P-L2

Product Details:

PROPELLER TYPE MECHANICAL AGITATOR : P-P2

Propeller Type Mechanical Agitator : Stainless steel rod with propeller type blade. Fitted with 1/20 HP motor with 4000 RPM with a speed regulator.

• Unit fitted on heavy cast-iron base.
• It can be raised and lowered in height.
• Complete with plug-cord etc.
• It works on 220V AC 50Hz single phase.

Additional Information:

• Item Code: P-P2

Product Details:

MICROPROCESSOR DISINTEGRATION TEST APPARATUS : P-D1B

Features:

• Complies with USP, IP specifications
• Extremely useful for pharmaceutical labs
• Highly Accurate and Easy to Operate
• Baskets & DOWN movement as per IP/USP

Specifications :

• 20 x 4 Line Alphanumeric LCD with Backlit
• 15 Soft Touch Membrane Type Keys
• 20 Setups Storage Facility
• 200 Samples Storage Facility
• Printer Attachment Facility
• Audio Visual Indicators for System Status.

Specifications :

Accessories:

• Main Unit with Acrylic Tank and Rectangular Cover Plate
• Reaction Vessel – capacity 1000 ml – 2 Nos.
• Two USP Baskets with 6 Tubes and 6 guided Discs, each
• External Temperature Sensor
• Mains Lead
• Instruction Manual
• Dust Cover

Additional Information:

• Item Code: P-D1B
• Production Capacity: 450
• Delivery Time: 1-2 WEEKS TIME
• Packaging Details: BOX/CARTON

Product Details:

V Cone Blender P-V2

The rotating shell V-Type blenders are used only for dry mixes and have no packing glands(seals) around shafts entering the chamber to cause potential problems. Modifications such as the addition of baffles to increase mixing shear have been made to these type of blenders. Machine to work on 220V AC 50 Hz single phase.

Salient Features :

• Minimal Attrition when blending gragile granules.
• Large-Capacity equipment available
• Easy to load and unload
• Easy to clean
• Minimal maintenance

Product Details:

CONE BLENDER : P-C6

Cone Blender (Double cone blender): It consists of two stainless steel cones welded with a cylindrical shell and having charging and discharging at opposite ends mounted on a channel stand.
Drive is by means of an electric motor & reduction gear box through a centre shaft.
The cone is mounted on plummer blocks for easy movement there by ensuring through mixing.
To facilitate easy movement of the cone while charging and discharging of the large units, a special inching arrangement is provided with the unit motor used are single phase.

Capacity :

a) 5 kg.

b) 10 kg.

Additional Information:

• Item Code: P-C6

Product Details:

BOTTLE AND LIQUID FILLING MACHINE : P-B9

Bottle / Liquid Filling Machine : A sturdy and heavy unit made of CRC sheet mounted on a heavy angle iron duly powder coated. Capacity of output of water is adjustable through cam system knob provided from 50 ml. to 300 ml. It can be operated in two ways:-
Hand operated.

P-B9M : Motorized (Semi Automatic) operated.

Additional Information:

• Item Code: P-B9

Product Details:

Item code: P-C4

Capsule Filling Machine:

A compact hand operated machine suitable to fill two-part hard gelatine capsules no. 0, 1 & 2 by interchangeable plates. Main body made of heavy cast iron and all contact parts made of brass richly plated or stainless steel. Handle locking arrangement makes the operator to lift the loading plate without fear of damaging the capsules. Pressing is achieved by cam system which also saves time to press the plunger as compared to screw system. Plate of stainless steel for any one no. Is supplied with machine. For filling 100 to 200 capsules.

Optional : Plates of other nos. supplied, on demand.

Additional Information:

• Item Code: P-C4

Product Details:

MEMBRANE FILTER HOLDER : P-M3

• Diameter 25 / 47 mm
• Buchner funnel of stainless steel
• Vacuum flask of borosilicate glass
• Membrane Filter Holder, With Neoprene Lid and
• Stopper, C-type Handle-clamp.
• Membrane Filter Holder, With SS Lid with vent,
• C-type Handle-clamp.
• Membrane Filter Holder, With Neoprene Lid and Stopper,
• SS Duck Clamp.

Additional Information:

• Item Code: P-M3

Product Details:

TABLET HARDNESS TESTER : P-T5

Useful to take quick reading from 0-20kg pressure for hardness.

The equipment is made of brass and richly chrome plated.

The index and division of reading is 0.1 kg. Complete in box.

Additional Information:

• Item Code: P-T5

Product Details:

FRIABILITY TEST APPARATUS : P-F1A

With digital preset revolution counter. The instrument will stop after set revolutions.

(a) Single drum.
(b) Double Drum.

Additional Information:

• Item Code: P-F1A
• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: Ready Stock

Product Details:

BLENDER : P-B5

Electrically operated with speed control device with three stainless steel jars of different sizes.

Additional Information:

• Item Code: P-B5

Product Details:

JAR TEST APPARATUS : P-J2

It has been specially designed for use in water treatment plants to correctly estimate the dosing of alum and such other coagulants for treatment of water. It consist of electronically controlled variable speed electronic motor with timing belt driven mechanism. Speed controller is provided to control the speed of four/six stirrers from 5 to 150 RPM. Stainless Steel/ Brass paddles are provided.

CAPACITY:

• 4 STIRRER
• 6 STIRRER

Additional Information:

• Item Code: P-J2

Product Details:

BOTTLE WASHING MACHINE : P-B8

Washing tank made of stainless steel mounted on sturdy square ms pipe frame duly powder coated, motorized driven unit embedded in a metallic box rested on the main unit with a drill check to accommodate various size of washing brushes. Workable on 220V-50Hz AC mains.

Additional Information:

• Item Code: P-B8

Product Details:

ANTIBIOTIC ZONE READER : P-A6

Antibiotic Zone Reader : The Antibiotic zone reader provides a rapid accurate method for determining the strength of antibiotic materials by measuring the diameter of an inhibited zone in petri dish.
This zone reader measures the diameter of the inhibited zone to 0.02mm with the range of 0 to 35mm.
It works on 220V AC 50Hz.

Additional Information:

• Item Code: P-A6

Product Details:

OINTMENT SLAB : P-O1

Ointment Slab is made from imported perspex sheet (graduated).

Sizes Available : 6″ x 6″ and 8″ x 8″.

Additional Information:

• Item Code: P-O1

Product Details:

FRIABILITY TEST APPARATUS : P-F1

Digital Friability Test Apparatus is a precision instrument suitable for measuring abression strength of tablets.
The unit is equipped with transparent acrylic drums which rotate at a speed of 25 ± 1 rpm. Acrylic drums are provided with an arm which carries the tablets along with it up to a predetermined height and allows them to fall from that specified height, while the drums are rotatin. Provision is made to remove the lid of the acrylic drum by unscrewing just one knob. Manual Timer.

(a) Single drum.
(b) Double Drum.

Additional Information:

• Item Code: P-F1

Product Details:

BULK DENSITY APPARATUS : P-B7

To determine the density of the powder graduated cylinder holded in clamps moves through motor up and down direction at a frequency rate between 28/32 cycles per minute through a distance of 5-6 cms. which strikes on a cushion fitted on the platform. A timer is provided to set the duration.

Bulk Density Apparatus :

P-B7A : With digital preset revolution counter. The instrument will stop after setted revolutions.

Additional Information:

• Item Code: P-B7

Product Details:

AMPOULE FILLING and SEALING DEVICE

P-A2: Electrically operated with piston of syringe having adjustment for quantity of liquid to be filled. Completed with burner for sealing.

Additional Information:

• Item Code: P-A2

Product Details:

LABORATORY MILL : P-L1

Laboratory Mill (Willey type) : For preparation of samples for analysis with minimum loss of moisture of volatile constituents. Weight distribution and balancing of rotating parts has been adjusted to provide greater stability and quieter performance with reduced vibration.
Suitability for wider variety of commercial materials. fitted with 1/4 HP motor, supplied with nickel plated hopper of 50 mm diameter with cover, three delivery sieves, having tops of 20, 40 and 80 mesh respectively, with plastic receiver, brush, L-N key, cord and plug. Suitable to operate on 220V, 1 Phase, 50 Cycles AC supply.

Additional Information:

• Item Code: P-L1

Product Details:

DISINTEGRATOR : P-D2

Highly polished hooper dia 2″. Completed with suitable motor to work on 220V AC 50Hz single phase. Fitted with 4 steel hammers fixed to a disc of dia. 1½” through which passes a shaft being revolved at the speed of approximately 3000 RPM. Hammers are enclosed in a drum. The lower portion can be fitted with different mesh screens (sieves)-coarse, medium or fine supplied with the equipment.

Additional Information:

• Item Code: P-D2
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

HISTAMINE CHAMBER : EM-29

A compact histamine aerosol apparatus. Acrylic box with nebulizer. Sphygmomanometer and chloroform belows.

Additional Information:

• Item Code: EM-29

Product Details:

COLLAPSIBLE TUBE / OINTMENT FILLING MACHINE : P-C3

Collapsible Tube / Ointment Filling Machine : Stroke type machine.
Filling capacity adjustable 5gm to 50gm.
Detachable nozzles provided for each capacity.
Hooper and contact parts made of stainless steel.

Additional Information:

• Item Code: P-C3
• Production Capacity: 45
• Delivery Time: 1 WEEKS

Product Details:

Compact Laboratory Centrifuge

Product Code -JEQ-6C

Compact rectangular body made of mild steel duly powder coated, with clear acrylic lockable lid, continuously variable speed regulator, safety fuse, pilot lamp etc. provided on streamlined panel. Maximum speed 4000 RPM. A special safety mode is provided that when lid is open instrument will stop working. With plug-cord to work on 220 V AC 50 Hz single phase.
Capacity (ml.) : 4 x 50, 6 x 50, 8 x 15, 12 x 15, 16 x 15 ANY ONE
Optional :
1. Automatic 0-60 minutes Timer.
2. Speedometer Digital.
3. Maximum speed 10000 can also be provided.

Additional Information:

• Production Capacity: 32
• Delivery Time: 1 WEEK

Product Details:

MICROPROCESSOR FRIABILITY TEST APPARATUS : P-F1M

Measures the tendency of tablet to chip or breakdown to pieces when held under mechanical stress. Instrument uses the latest microcontroller technology and advanced engineering techniques so as to give enhanced accuracy and reproductibility Instument is equipped with 4 line alphanumeric LCD display with backlit and 16no of soft touch membrane type keys.
Friability tester can be operated using only one or two drums. The rotational speed of drums can be set at different speeds (20 60rpm). The samples can be loaded conveniently without removing the drums and after the test completion the samples are automatically unloaded to the collectionn tray. To eliminate the manual input of weight of samples, the facility of connecting a weighing scale is also available. When weighing scale is
connected the weight of sample is automatically recorded to the instrument from weighing balance.
The test can be performed in two different modes Time or Count mode. The instrument stores the test parameters, readings and results simultaneously inn the memory which are retained even after the power is switched off. Provision is also been made for attachment of a printer so as to provide hardcopy printouts of test data, including time, date and calculated results.

Specification:

• Test Methods : Time Count Mode.
• Speed Of Drums : 20-60 RPM.
• No Of Drums : 2.
• Display : 20×4 Alphanumeric Lcd.
• Keyboard : Soft Touch Membrane Keys, Alphanumeric Mobile Keypad.
• Counter : 1 TO 9999 Rotations.
• Timer : 1 SEC TO 9HRS 59MIN 59 SECS.
• Type Of Drive : Direct Drive With Stepper Motor.
• Printer : Attachment Of RS232 Printer With Serial Interface.
• Electrical Supply : 230V AC± 10%, 50/60HZ, 44VA.

Advantages :

• Microprocessor based, easy to use.
• Complies with USP, IP Specifications.
• 20 x 4 line alphnumeric LCD display with backlit.
• 16 soft touch membrane type keys.
• Independent programmable setups for Time Count mode with storage.
• Password protected user access.
• RS232 printer attachment facility.
• Automatically calculates percentage friability.
• Loading and unloading of tablets without removing drums.
• Power failure detection facility.
• User friendly operation with menus current status indicators.

Additional Information:

• Item Code: P-F1M
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

 FILTRATION ASSEMBLY( FILTER PRESS) : P-F5

All contact parts made of stainless steel and comprises of following components :

• Pressure vessel stainless steel cap. 20 lit. & 6 or 8
• disc plates
• Motor compressor.
• Deep and shallow stainless steel filter plates
• Filter media .
• Stainless steel pump and pipes.
• Filter cartridge assembly
• Stainless steel top cover
• Perforated screens
• Interlocking cups
• Stainless steel trolley.

Additional Information:

• Item Code: P-F5

Product Details:

Item code: P-D1A

Disintegration Test Machine:

P-D1A : Specifications as above but with digital temperature controller cum indicator and digital timer. All specifications conforming to Indian pharmacopoeia standards:-

• With single basket
• With double basket

Additional Information:

• Item Code: P-D1A

Product Details:

DISINTEGRATION TEST MACHINE : P-D1A

The shaft moves up and down by 50to 60mm at speed of 28-32 strokes per minute.
On the upper end of the shaft fitted a horizontal strip with clamp on either side.
These clamps hold glass vessels open at both ends and with stainless steel wire gauge with rubber rings at the lower end, which dips in water.
Two independently thermostatically controlled hot plate rating 125 watt are fixed on the top of the cabinet upon which beakers of 1000 ml size are placed filled with water.
Temperature is maintained at 37ºC with and accuracy of 1ºC independent switches with neon indicators for motor hot plates are fitted on a panel.
Mains fuse with two meters mains cord and plug provide work on 220 volt A.C. Mains.
With digital temperature controller cum indicator and digital timer.

AVAILABLE IN: 

• With single basket.
• With double basket.

Additional Information:

• Item Code: P-D1