Engineering Teaching Equipments

Product Details:

Item code: MTS-3509

Description & Specification:

Microteknik is Manufacturer, Exporter & Supplier of Refrigeration Wiring Skills Trainer.
The unit was designed for training on refrigeration engineering. Electrical starting, operating, and control units as are necessary for the safe operation of a refrigeration system are demonstrated. Typical power and control circuits can be demonstrated and wired up on the clearly laid out benchtop unit. The industrial components provide students with a relevant practical education.

Technical Description

The unit was designed for training on refrigeration engineering. Electrical starting, operating, and control units as are necessary for the safe operation of a refrigeration system are demonstrated. Typical power and control circuits can be demonstrated and wired up on the clearly laid out benchtop unit. The industrial components provide students with a relevant practical education

Additional Information:

• Item Code: MTS-3509
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: India
• Production Capacity: 125
• Delivery Time: 2-3 WEEKS
• Packaging Details: BOX/CARTON

Product Details:

Item code: MT-801

Digital direct shear box, floor mounted with carriage assembly and load hanger with 10:1 lever loading device.To accept the following sample sizes:60mm diameter60mm square100mm diameter100mm square2.5 inch diameter Features
Microprocessor controlled digital stepper motor Control via the digital display with keyboard Return datum facility Fully steplessly variable speed over the range of 0.00001 to 9.99999mm/minuteRS232 port Forward/reverse travel limit switches Will accept either analogue or digital measuring devices

Additional Information:

• Item Code: MT-801
• Port of Dispatch: Ambala
• Delivery Time: 30 days

Product Details:

Item code: MTS-3502

Our firm is one of the reckoned names in industry for manufacturing, supplying and exporting Automatic Surface Grinder Machines. Available at economic rates, these machines are offered after checking and analyzing them on pre-defined quality parameters that ensure that they are free from any fault. Moreover, our range of these machines is accredited for their flawless performance and noiseless operations. Features:Sturdy construction Longer serving life Hassle-free operations

Additional Information:

• Item Code: MTS-3502
• Port of Dispatch: India

Product Details:

Agriculture Grinder MT-102012

Microeknik is Suppliers and Exporters Engineering Instruments and Equipments which are Best used for Educational purposes in Engineering Colleges. Manufactured using superior quality raw material, this machine is useful for making the roughage and rava of daliya, idli rava, sogi kesari rava and maize.

Product Details:

Item code: MTS-204A

Vibrating Machine

Our firm specializes in offering a wide array of Vibrating Machine. The offered vibrating machine is inspected by our quality analyst on diverse parameters so as to supply defect free range to customers. As well, our vibrating machine is used for to impart greater vibrating of lesser amplitude to the mould. Our vibrating machine can be purchased at nominal rates within the committed time - frame.
Features:

• High efficiency
• Robust construction
• Longer functional life

Specifications:

• Power optional: 1000w
• 150 kg loading
• Stone crusher special material
• Wear resistance
• Low pollution

Additional Information:

• Item Code: MTS-204A
• Port of Dispatch: India

Product Details:

Item code: MTS-806

Tensile Testing Machine

Tensile strength and elongation are the two prime characteristics of most of the raw materials, whether they are metals; or non metals such as rubber, leather, textiles, plastic, paper; or finished products such as rods, wires, ropes, yarns, belts etceteras. These two properties often play a major role in determining the suitability of any raw material for any specified application. It is, therefore, of utmost importance to determine these characteristics accurately, conveniently, and quickly. The Tensile Testing Machines provide a relatively inexpensive way for determining the tensile strength and elongation of a variety of raw materials such as rubber, leather, fabric, plastics, belts, wires, etceteras. They are based on constant rate of traverse principle, in which one end of the test specimen is held in a stationery grip while the other end is moved at a known fixed speed with the help of a motor, gear box, and screw arrangement. In electronic type tensile testers, the load exerted on the stationary grip is measured by a load cell and is displayed on a digital indicator. The indicator has a peak force retention memory, which can be recalled to display the maximum load exerted on the test specimen before its failure. An overload protection relay is provided to automatically stop the motor if the load exerted goes above the maximum capacity of the load cell. civil lab equipments manufacturers.

Application Of Tensile Testing Machine

• Single Screw Tensile Testing Machine to determine properties of tensile and elongation .
• Load capacity : up to 500 kg*.
• No. of load cell : One.
• Cross Travel : Up to 1000mm*.
• Speed : Variable between 10mm/minute to 500mm/minute.
• Paint : Powder coated.
• Power : 230 Volts, 50Hz, single phase.

Additional Information:

• Item Code: MTS-806
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: India

Product Details:

Item code: MTS-3504

Features:
Brushless Motor 1kWScrap Collection Device Spindle Motor Speed Max. 5000rpmContain Fourth Axes Connection Socket.

Specifications:

• Drilling Capacity: 16mm (0.6”).
• Worktable Size: 500x160mm (22” x 6.3”).
• Worktable T-Slot Size: 12mm (0.5”).
• Max. Loading of Worktable: 35 kg.
• Table Travel x axes: 280mm (11”).
• Table Travel y axes: 120mm (4.7”).
• Table Travel z axes: 270mm (11”).
• X Axes Feeding Motor Power: 4NmY Axes Feeding Motor Power: 4 Nm.
• Z Axes Feeding Motor Power: 6 Nm.
• X/ Y/ Z Axes Max. Moving Speed: 2m/min.
• X/ Y/ Z Axes Feeding Speed: 500mm/min.
• Throat: 232mm (5.9”).
• Position Precision: 0.015mm.
• Repeat Positioning Precision: 001mm.
• Spindle Taper: MT3#/R8/ISO30.
• Spindle Speed: 100-5000 rpm.
• Spindle Motor: 1kw.
• Machine Size (LxWxH): 1280x895x1845mm.
• Packing Size (LxWxH): 1420x1060x2035mm.
• G.W./N.W.: 570/510 kg.

Additional Information:

• Item Code: MTS-3504
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: India

Product Details:

Item code: MTS-3507

Description & Specification:

Demonstrating machine components and illustrating their operations. Worm gear, gear ratio i 18.50:1, worm wheel tooth number z=37, worm tooth number z=2. All movement functions to be preserved, shafts, worm and worm wheel can be rotated via crank handle mounted on base plate l x w ± 350 x 300 mm, powder-coated black steel plate fitted with carrying handles and rubber feet provided with a sectional view for technical drawing exercises. w x d x h:± 350 x 300 x 140 mm.

Additional Information:

• Port of Dispatch: India

Product Details:

Item code: MTS-3508

Description

The handling of a case controller as used in commercial cooling units can be trained with the benchtop unit. The case controller with programming unit, expansion valve and pressure transmitter are real components. Other components of a refrigeration system as evaporator or compressor are simulated in the supplied software. The case controller monitors continuously the functioning of the components and triggers an alarm when faults occur. The software simulates the behaviour of a freezer at different operating states. The temperature and pressure distributions and the switching modes of expansion valve and compressor are displayed in the screen “measured values as a function of time& rdquo;. Ambient temperature and the refrigerant can be chosen in the system diagram, coloured buttons indicate the operating state of the components. All components, signal lamps, switches and a system diagram are clearly arranged on the front panel.

Features

• Sight glass tubes at inlet and outlet of evaporator and condenser constructed of explosion proof, tie-bolt design
• Cut-out and by-pass valves
• Hand valves allow malfunctions to be simulated
• Many control changes are possible
• Combination low pressure control and high pressure cut-out
• Thermostatic control with an adjustable range of –30°F to 100°F
• 2 solenoid liquid line valves

Specifications

• Compressor: Single phase, 1/2 HP semi-hermetic (bolted reciprocating-type) 115V AC, 60 Hz, 15 Amp
• Evaporators: Copper tube coils with aluminum fins and variable speed blower mounted on back of panel
• Condenser: A forced air-cooled condenser to match compressor capacity
• Uses HFC 134A refrigerant
• Mounting stand: 72”W x 18”D x 72”H
• Panels: 1⁄4” thick with 3⁄4” thick component shelf
• Electrical requirements: 115V AC, 60 Hz

Additional Information:

• Item Code: MTS-3508
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: India

Product Details:

Item code: MT-101717

Versatile Data Acquisition System:-

Description

Versatile Data Acquisition System offered comes supported by sampling box, sensors and computer and are interconnected through wire. Finding use in lab working environment, the product allows connection with different sampling boxes. Some of its features include providing for accurate and reliable operations, digital interface, portable size finish, allows for easy installation, allows for independent working support, compatible with existing computer and operating system.

Additional Information:

• Item Code: MT-101717

Product Details:

Curing Tanks MTS-1235

Microteknik are manufacturer and exporter of curing tanks.

Specification of Curing Tanks:

• 24 Hour cycle from time of mixing.
• Controlled 35oC or 100oC ±2oC Curing Temperature for concrete.
• Controlled 27oC ± 2oC Curing Temperature for grey cement.
• The tank has been designed to accommodate 150mm/70.6mm cube moulds upto 36/72 cube mould and fully insulated, complete with a hinged lid, heater, thermostat and re-circulated pump. Provision of two removable racks allowing free circulation of water around each mould. The pump, drain valves and electrical equipment are housed in a compartment located at one end of the tank. The Tank is heated by a immersion heater under normal conditions and refrigeration system for grey cement the temperature is controlled at 35oC or 100oC ± 2oC / 27oC +2oC , expect for the 15 minutes after immersion of the freshly made specimens.

Additional Information:

• Item Code: MTS-1235

Product Details:

Item code: MTS-3520

Tension Set Apparatus For Testing Lab

We also offer various kinds of Tension Set Apparatus available in different sizes and materials to suit the varying requirements of our clients. These are acclaimed for their excellent strength and wear & tear resistance. Our range of Tension Set Apparatus are used for various testing purposes and thus highly demanded among rubber industries.

Additional Information:

• Item Code: MTS-3520
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: India
• Production Capacity: Ready Stock
• Delivery Time: 1 Week

Product Details:

Item code: MTS-323

Plant Canopy Analyzer :
We are among the preeminent Plant canopy analyzer exporters. Our plant canopy analyzers are extremely popular in India and south Asia. Good battery life

Additional Information:

• Item Code: MTS-323

Product Details:

Item code: MTS-810

We are a professional digital display hydraulic universal testing machine manufacturer based india. We provide a wide range of products, including full automatic compression testing machine, hydraulic compression testing machine, full automatic pneumatic consolidation apparatus, and more.

Features

• The frames of the hydraulic universal testing machine feature dual spaces so users can quickly change between tension and compression testing without having to remove heavy fixtures.
• The control console of the hydraulic universal testing machine offers integrated digital meter, hydraulic power pack, precise electronic loading regulator and unloading valves.
• 3. It has extra-length screws and columns, with an adjustable lower crosshead, to increase the available test space for longer test samples.
• The hydraulic universal testing machine has a digital displacement transducer for the best positioning and measuring accuracy.
• It is equipped with three sets of test jigs including tensile jigs, compression jigs and bending jigs, hydraulic clamps and system, an oil resource system, and a main frame.
• Application

The hydraulic universal testing machine is used for doing testing experiments such as tensile, compression, bending and shear testing for all kinds of metal materials and nonmetal materials such as plastic, concrete, cement and so on.

Additional Information:

• Item Code: MTS-810

Product Details:

Item code: MTS-3503

We provide our customers with high quality Master Radial Drilling Machine. The machine features the latest ribbed high graded cast structure that enhances its sturdiness. The machine is precision engineered to achieve high dimensional accuracy, which is critical for the smooth and trouble free operation of the machine. These machines are avail to our client in a very affordable price rates.

Features:

• Completely tested
• Consume least power
• Long functional life

Technical specifications:

• Standard Accessories
• Optional accessories
• Electrical with control panel
• Tilting work table
• T- Slotted work table
• Taping Attachment
• Maintenance & Instruction manual
• Low voltage halogen work light
• Complete coolant system

Additional Information:

• Item Code: MTS-3503
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: India

Product Details:

Item code: MTS-3517

IN-SITU Vane Shear Tester

The apparatus is designed for conducting in situ vane shear test from bottom of a bore hole in saturated cohesive deposits for determining their in place shearing resistance. The equipment consists of a torque applicator assembly mounted on a base, a gear wheel, which is marked in degrees, holds a torque ring and is geared to a crank, the torque ring is a split ring & deforms as torque is applied & the deformation is indicated by a dial gauge. A calibration 2 chart to convert dial gauge readings to torque force in kgs/cm is supplied. A pointer is provided For registering the rotations of the vane, a detachable stand is provided to anchor the instrument an attachment to securely hold the string of rods is provided the equipments comprises of the following :

• Torque applicator assembly capacity 2000kg/cm with split proving ring & dial gauge 0.002 x 5mm complete with stand.
• Vane ( with vane rod ) 37.5mm dia x 75mm high 1 no.
• Vane ( with vane rod ) 50.0mm dia x 100mm high 1 no.
• Torque rod ( square cross section) 0.6mts long 1 no.
• Rods quick couplind type, 1 mtr. long 1 no.
• Rods quick coupling type, 1 ½ mtr. long 1 no.
• Dummy rod, corresponding to 37.5mm dia vane 1 no.
• Dummy rod , corresponding to 50.0mm dia vane 1 no

Additional Information:

• Item Code: MTS-3517
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: India

Product Details:

Item code: MT-802

The Brinell Hardness Testing Machines are ideal for production testing. The unmatched performance of the Brinell Hardness Testing Machine in respective application has made the Hardness Testing Machine an ideal choice of various industries.

Components & Working Of Brinell Hardness Testing Machine

• An 'Optical Device' with 14x magnification is provided in front to project diameter of ball impression on glass screen coupled with a micrometer measuring system with 0.01 mm accuracy
• The indenter swivels and projects diameter of ball impression instantaneously after unloading operation

Designed To Measure

• Hardness of casting, forgings, other metals and alloys of all types, hard or soft, whether flat, round or irregular in shape

Additional Information:

• Item Code: MT-802

Product Details:

Item code: MTS-201k

Computerized Universal Tensile Tester

Specifications :

• Loading System - AC/DC drive.
• Max. capacity - available from 10 Kgf to 10,000 Kgf.
• Test Width (mm) approx. - 400mm
• Crosshead Travel (mm) approx. - 1000mm
• Effective Stroke (mm) approx. - 800mm
• Crosshead Speed (mm/min) - upto to 500 mm/min(approx)
• Crosshead Return Speed - upto 500mm/min
• Tensile Load Measurement Accuracy - /- 1%
• Stroke Limiter upper/lower - 2 points (upper/lower)
• Power : 220-240 Volts, 1-phase, 50Hz
• Test parameters displayed with graph simultaneously
• Real time graphic display of data
• Overlay display of data cur ve possible during test
• Selectable graphical display presentation
• Other test methods can be programmed by the operator
• Return after a test is selected
• Calibration File to calibrate the unit.

Additional Information:

• Item Code: MTS-201k

Product Details:

Item code: MTS-3506

Linear Motion Apparatus

Our Firm is run by a team of highly qualified personnel, who help us to manufacture and supply an exclusive range of Linear Motion Steadiness Test Apparatus. This apparatus is used in hospitals for measuring patients hand and knee movements. At our production unit, we use finest quality stainless steel and other components, to manufacture the apparatus. We can make the Linear Motion Steadiness Test Apparatus available for the clients in different specifications and offer at the market leading prices.

Features:

Rugged constructionEasy to use
Longer working life

Further Details:

Linear motion steadiness test unit is designed to progressivelly measure One's aspect of psychomotor control. Patient moves a ring stylus through a progressively increasing stainless steel rod to measure subject's performance of Hand movement. A beep gives the feed-back while stylus touches the rod. Distance of movement can be measured and recorded.

Additional Information:

• Item Code: MTS-3506
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: India

Product Details:

Item code: MTS-3510

Level Control Trainer

Level control trainer is designed for understanding the basic principles of level control. The process setup consists of supply water tank fitted with pump for water circulation. The level transmitter used for level sensing is fitted on transparent process tank. The process parameter (level) is controlled by microprocessor based digital indicating controller which manipulates pneumatic control valve through I/P converter. A pneumatic control valve adjusts the water flow in to the tank. These units along with necessary piping are fitted on support housing designed for tabletop mounting.

Feature

• The controller can be connected to computer through USB port for monitoring the process in SCADA mode.
• Product is supplied with 32 point demo version of SCADA software package

Additional Information:

• Item Code: MTS-3510
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: India

Product Details:

Item code: MTS-494B

Laboratory Vane Shear Apparatus Laboratory Vane Shear Apparatus Hand Operated

Specifications:
Consists of a torque head adjustable in height by means of a lead screw rotated by a drive wheel to enable the vane to be lowered into the specimen. Rotating of the vane is by means of a hand wheel which operates a worm gear arrangement during upper end of calibrated torsion spring. Vane dia, rod dia, vane size & vane height as per IS specifications. The Vane Shaft is attached through the hollow upper shaft to a resetable pointer, which indicates the angle of torque on a dial graduated in degrees. The dial reading multiplied by spring factor gives the torque. A container for soil sample is also supplied, and a sampling tube of 38mm I.D. & 150mm long can also be used as container. Supplied with set of four springs, one each of approx. 2 kg.cm., 4 kg.cm., 6 kg.cm., and 8 kg.cm. Complete as above in a wooden carrying case.

Additional Information:

• Item Code: MTS-494B
• Port of Dispatch: India

Product Details:

Item code: MTS-803C

We are a professional Torsion Testing Machine Engineering Lab Training Systems manufacturer and Exporter based india. We provide a wide range of products, including full automatic compression testing machine, hydraulic compression testing machine, Universal testing machine, Engineering lab Testing machine, full automatic pneumatic consolidation apparatus, and more.

Description & Specification

Technical Description

The unit is used for torsional testing of different materials to fracture. Test moment and angle of twist are measured. Bars of different length and diameter are used as specimens. The moment is applied using a reduction geared motor that provides four different drive speeds via the frequency converter. A strain gauge measuring shaft provides the moment as an electrical signal, the angle of twist is recorded by an optoelectronic angular encoder. The moment is transmitted to the test bars using commercially available hex sockets. For adaptation to different length probes, the dolly can be slid. The base plate is reinforced against twisting with square sections. A transparent plastic cover provides protection against flying debris on fracture

Additional Information:

• Item Code: MTS-803C

Product Details:

Item code: MTS-201L

Standard Universal Testing Machine - Designed for testing metals and other materials in tension, compression, bending, transverse, shear,hardness & torsion loads.
FEATURES:

• Loading Accuracy /- 1 %
• Variable Straining Speeds
• Continuous Autographic Recorder
• Adjustable Lower Cross-head
• Simple Control Operation
• Special Test Attachments / Accessories
• Rigid Construction
• Safety Arrangements.

The machine is operated by hydraulic transmission of load from the test piece to a load indicator. Load is applied by a hydrostatically lubricated ram. Main cylinder pressure is transmitted to the cylinder of the pendulum dynamometer system. The load transmitted to the cylinder of the dynamometer is transferred through a lever system to a pendulum. Displacement of the pendulum actuates the rack and pinion mechanism which operates the load indicator pointer and recorder unit. The deflection of the pendulum represents the true load applied on the test-piece.

Additional Information:

• Item Code: MTS-201L

Product Details:

Item code: MTS-802A
We are a professional digital display hydraulic universal testing machine manufacturer based india. We provide a wide range of products, including full automatic compression testing machine, hydraulic compression testing machine, full automatic pneumatic consolidation apparatus, and more.

Technical Description

This material tester is a benchtop unit for training purposes. Simple operation and robust construction make the unit suitable for student experiments. The test spectrum for the basis unit covers tensile tests, and also Brinell hardness testing. Using the accessories that are also available, additional bending, shear, cupping and compressive tests can be performed. PC data acquisition and evaluation is also possible. The basic version of the unit does not require any additional sources of power. The test load is generated using a hand operated hydraulic system. The test load is displayed using a large gauge and a trailing pointer. The elongation of the test specimen is recorded via a mechanical gauge. The unit features a clear layout and the rapid changing of accessories.

Additional Information:

• Item Code: MTS-802A
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Item code: MTS-206A

Description & Specification:

Heat Deflection Temperature Tester -The Heat Deflection Temperature of plastic materials is the temperature at which the material deflects by a specified amount under the action of a specified stress. It is determined by supporting a rectangular test specimen over two cylindrical edged blocks and pressing it at the center of the supported span through a cylindrical edged loading tip. The test specimen, along with the supports and the loading frame, is kept in a high temperature bath whose temperature is slowly raised. The temperature at which the test specimen deflects through a predetermined distance is the heat deflection temperature of the material under test civil lab equipments manufacturers.

Additional Information:

• Item Code: MTS-206A
• Port of Dispatch: India

Product Details:

Item code: MTS-8001MF

Melt Flow Index Apparatus For Testing Lab

We are engaged in manufacturing, exporting and supplying a diverse range of Melt Flow Index Apparatus. This is defined as the rate of flow in grams per ten minutes of molten resins from a cylindrical cavity, the offered index apparatus is manufactured using finest quality components and progressive technology by our competent professionals. This index apparatus is checked on various quality parameters to deliver a flawless range from our end.
Features:

• Easy to operate
• Sturdy construction
• Require less maintenance

Other Details:
Dead weights for applying loads of 325 g, 1050 g, 2160 g, 5000 g, and 10000 g including the weight of the piston assembly are also supplied as standard accessories.

Additional Information:

• Item Code: MTS-8001MF
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: India

Product Details:

Item code: MTS-3505

Abrasion Testing Machine

This machine is for determining the resistance to wear off small size coarse aggregates and crushed rock. The machine consists of a hollow cylinder, mounted on a sturdy frame on ball bearings. A detachable shelf which extends throughout the inside length of the drum catches the abrasive charge and does not allow it to fall on the cover. The drum is rotated at a speed of 30-33 rpm by an electric motor through a heavy duty reduction gear. Supplied complete with a tray for collection of the material.

Suitable for operation on 415V, 3 phase, 50Hz,AC Supply.

Additional Information:

• Item Code: MTS-3505
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: India

Product Details:

Item code: MTS-3511

Pressure Control Trainer

Product Description:-

Pressure control trainer is designed for understanding the basic principles of pressure control. The process set up consists of pressure vessel fitted with pneumatic control valve. Pressure transmitter is used for pressure sensing. The process parameter (Pressure) is controlled by microprocessor based digital indicating controller which manipulates pneumatic control valve fitted at outlet of pressure tank outlet through I/P converter. These units along with necessary piping are fitted on support housing designed for tabletop mounting. The controller can be connected to computer through USB port for monitoring the process in SCADA mode. Product is supplied with 32 point demo version of SCADA software package.

Additional Information:

• Item Code: MTS-3511
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: India

Product Details:

Item code: MTS-3512

Cement Sampler For Testing Lab
Microteknik is one of the leading manufacturer and exporter cement sampler.
This is a brass tube approximately 53cm long and 2. 8cm i. D. With a wooden handle. Total length approximately 73cm. The tube has the sharp angular edge which conveniently pierces cement bags. An air hole of approximately 3mm dia is drilled on the near handle. Total sample collected at one time is 300cm 3 approximately .

Additional Information:

• Item Code: MTS-3512
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: India

Product Details:

Item code: MTS-435

Concrete Test Hammer For Testing Lab Microteknik is one of the leading manufacturer and exporter engineering equipment, civil engineering instrument etc.

Descriptions

It is similar to the above but is used for testing concrete with over size aggregates for which test, cubes promise no reliable results and for testing concrete roads. Its plunger is wider as such, the amount of concrete reached by the impact is considerbly greater. With this model also the results obtained are within 20% of the actual compressive strength. The instrument is supplied with two handles which can be attached to the body of the concrete test hammer for carrying out the test easily. Complete with grinding stones. civil lab equipments manufacturers.

Additional Information:

• Item Code: MTS-435
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: India

Product Details:

Item code: MTS-3515

Digital Shear Apparatus

Digital Direct/ Residual/ Shear Apparatus
Used to determine the resistance to shearing of all types of soil specimens both consolidated and drained, undisturbed or remoulded samples. The machine can accommodate specimens dia. 60, 100 mm, and square 60x60, 100x100 mm. The apparatus is equipped with a control closed loop motor with epicycloid reducers. At the beginning of each test, the machine performs an automatic and complete internal check, a position reset with the elimination of all possible positioning errors and all pauses. The input of all the test patterns is achieved by the interaction of the keyboard and the alphanumeric display with self-memory, thus granting infinitesimal resolutions in short times. All data are input and stored when the machine is in stand-by, without affecting the specimen under test with quick machine setting. Possibility to fix maximum excursion of the shear box, so as to interrupt automatically the test. It is possible to input a different return speed (residual shear) in relation to the one used for the shear test, thus allowing a quick playback to select the residual shear test, saving a lot of time. For determining the direct shear strength of soils on specimen size 60mm x 60mm x 25mm
Features :

• RS 232 output for connection to PC
• Display of both speed and displacement with 0.00001 mm resolution
• Shear speed between 0.00001 to 9.99999 mm/minute
• Max shear effort: 5000 N possible on the whole speed range
• Possibility of direct vertical load, or with a lever arm ratio 10:1
• Max vertical direct load: 500N; with lever arm: 5500N
• Display and pilot lamps to signal any bad functioning and alarms
• Box group mounted on ball track with high quality antifriction system
• Read value results are immediate and of extreme accuracy
• Extremely easy and practical use, not requiring qualified staff.
• Shear box, hollow punch and tamper are not included in the standard supply and have to be ordered separately Power supply: 230 V A.C. Single Phase 50Hz

Additional Information:

• Item Code: MTS-3515
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: India

Product Details:

Item code: MTS-3513

Direct Shear Apparatus

We are highly affianced in manufacturing, exporting and supplying superior quality Direct Shear Test Apparatus. Only high quality basic materials are used while designing the given direct shear test apparatus, for increased acquiescence with market standards of quality. This direct shear test apparatus is broadly valued in the market for its perfect quality. Along with that, our direct shear test apparatus is presented in different specifications and can be modified, as per exact needs of our customers and at suitable rates.

Technical Specification

Direct Shear (Motorized Single Speed)
Same as above but electrically operated to give a single constant rate of stain on 1.25 mm / min. Suitable for 230 V A.C. Weight 175 kg. approx.
Features:

• High performance
• Energy efficiency
• Robust construction

Additional Information:

• Item Code: MTS-3513
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: India

Product Details:

Item code: MTS-205A

Protective clothing Flammability Tester

Detailed & Description

This protective clothing flammability tester is designed according to ISO15025 standard.It is mainly used for simulation technology assessment protective clothing on fire danger of the spread of flame performance. It also can measure limited flame spread properties of vertically oriented textile fabrics and indurstial products in the form of single or multi-component fabrics when subjected to a small defined flame.

• Flame Angle 0°30°90°
• Height of Flame 25±2mm 40±2mm
• Flame time /-1 s (can be adustable)
• precision for afterflame time & glowflame time±0.1s
• Burn tube according to standard with copper materail
• Gas supply : Methane Gas
• dimension L1200mmXW 900mmxH1300mm

Additional Information:

• Item Code: MTS-205A
• Port of Dispatch: India

Product Details:

Item code: MT-101716

Pitot Tube

Extendable (using poles provided) straight Pitot static tube.6mm diameter, stainless steel.
Straight design provides much easier access to those awkward and difficult ducts.

Accessories

included with the Pitot tube:

• 1m lengths of flexible silicon tubing.
• 300mm x 10mm extension poles.
• Directional pointerInstruction manual (for ST & TT series micro manometers).

Additional Information:

• Item Code: MT-101716

Product Details:

Item code: MTS-3516

Direct ShearDirect Shear Motorised 

The apparatus comprises of the following.

LOADING UNIT :

Supplied with load yoke with direct and lever system for applying load. Normal stress capacity 8 kg/sq. cm. Load is applied either directly or through a counter balanced detachable lever. Provision is made for the load to be applied either through a steel ball recessed in the loading pad or direct through a boss on the pre calibrated loading yoke. The loading unit is provided with V strips and roller strips for frictionless movement of shear box housing.

ESSENTIAL ACCESSORIES :

High sensitivity compression proving ring. Cap 200kg. One consolidation dial gauge 0.01mm x 25mm and one strain dial gauge 0.01mm x 25mm

Additional Information:

• Item Code: MTS-3516
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: India

Product Details:

Item code: MTS-3501

Microteknik is one of the leading manufacturer and exporter of Engineering lab Equipment. Refrigiration Test Rig The set up demonstrates the students about the basic principal of a refrigeration cycle. The test rig is designed for the study of thermodynamics of vapour Compression refrigeration cycle by way of demonstration and experimentation. It has a facility to measure various parameters for experimentation.

DESCRIPTION :

The set up demonstrates the students about the basic principal of a refrigeration cycle. The test rig is designed for the study of thermodynamics of vapour Compression refrigeration cycle by way of demonstration and experimentation. It has a facility to measure various parameters for experimentation.

EXPERIMENTATION:

• To calculate refrigerant capacity.
• To Study the Vapour Compression refrigerator cycle.
• To Calculate Co-efficient of performance and draw P-H Diagram.

UTILITIES REQUIRED :

• Electric supply 5A-220 V AC
• Water supply and drainage
• Floor area : 1.5 m x 1m

TECHNICAL DETAILS :

• Compressor : Hermitically sealed compressor.
• Capacity 1/3 Ton, Kirloskar make.
• Agitator : Compatible capacity.
• Condenser : Air cooled compatible to 1/3 Ton compressor
• Condenser Cooling fan : Compatible capacity with permanent lubricated motor.
• Evaporator : Made of Stainless Steel, Insulated with ceramic wool/P.U.F.
• Rotameter : Range 6 to 60 LPH
• Expansion Device : Capillary Tube, Compatible Capacity.
• Pressure Gauges : 2 Nos. Safety Control : overload and over current protectors for
• compressor and Time delay circuit. Temperature Sensor : RTD PT-100 Type.
• Control Panel comprises of :
• Digital Voltmeter : 0-300 V

Additional Information:

• Item Code: MTS-3501
• Production Capacity: 90
• Delivery Time: 3-4 WEEKS
• Packaging Details: OPTIONAL EXPORT CARTON PACKAGING BOX AVAILABLE

Product Details:

Item code: MTS-3518

Electronic Triaxial Shear Test Apparatus Motorised

The settlement of foundations and changes in earth pressure due to movement of retaining walls or other earth supports, the yield of soil caused by application of load, are affected by the stress-strain relationship of soils. The experimental investigation for determining the stress-strain relation is usually carried out with Triaxial Compression Test. During the test, the soil samples gradually stressed up to failure. Generally speaking, Triaxial Tests are performed to stimulate different types of stress and drainage conditions that can occur in the sub-soil for simulating the effect of building construction, excavation, tunneling etc. Three different Triaxial Tests are usually performed for total and effective stress measurement. The 50 kN capacity machine, designed primarily for triaxial testing of soil specimens upto 100mm diameter x 200 mm long, comprises a rigid twin column construction with an integral fully variable.
Models available digital triaxial system Microprocessor controlled drive unit and LCD display with a touch sensitive keyboard. The machine is normally bench mounted for ease of installation and operation. The digital indication of the load, pressure and the strain are displayed on the front panel of the load frame. Selector switch has been provided to shift the digital indicator from load to pressure or to strain.
SPECIFICATION :

• Capacity : 50kN
• Capacity Capacity : Microprocessor Controlled Stepper Motor Drive
• Platen speed range : 0.00001mm/min. to 9.99999 mm/min.
• Rapid Approach Speed : 25 mm/min.
• Horizontal Clearance : 364 mm
• Max. Vertical Clearance : 910 mm
• Max. Platen Travel : 100 mm
• Specimen Dia : 38 mm (50, 75 & 100 mm can also be used)
• Universal Electronic Load Cell : 10 kN cap.
• L.V.D.T. : 0-20mm
• Pore Pressure Transducer : 20 bar cap.
• Electrical supply : 230V, Single Phase, 50 cycles, A.C.

Additional Information:

• Item Code: MTS-3518
• Pay Mode Terms: L/C (Letter of Credit)
• Port of Dispatch: India

Product Details:

Kerr Effect Experiment Kit MTEE-1303

Description of Kerr Effect Experiment Kit

• Safe and Convenient
• Mounted on specially designed hexagonal optical bench.
• Power Supply using safety sockets.
• Kerr Cell and Monochromatic Light Filters imported from Leybold of Germany.

Product Details:

Advanced Polarimeter  11890

To observe the rotation of the plane of polarization of monochromatic light by sugar solution for determining the concentration of solution of optically active substance.

Salient Features of Advanced Polarimeters

• Reading magnifier are provided on the apparatus to read the circular scale.
• Power supply is housed inside the instrument. Unlike the conventional design which has a separate power unit.
• Least count of 3 minutes against 6 minutes of the conventionally available design.
• Polarimeter can be used for educational & research purposes as well as pharmaceutical & sugar industry.
• Easy to take reading because the scale reading and triple shades are visible simultaneously.