Fluid Mechanics Lab

Product Details:

PIPE SURGE & WATER HAMMER APPARATUS

CODE: MTFM-12

Specification:

·        Pipe surge and water hammer are two related but independent phenomena which arise when fluid flowing in a pipe is accelerated or decelerated. The associated pressure transients can be damaging to pipe work or components and systems must be designed to avoid or with stand them.

 

·        The equipment designed by clearly demonstrates the different effects resulting from gradual or instantaneous changes in fluid velocity. Effect of initial fluid velocity can also be investigated. Pipe surge resulting from a gradual change in fluid velocity is clearly seen as fluctuating changes in head in a surge shaft.

 

·        Water hammer resulting from a rapid change in fluid velocity is clearly seen as large changes in pressure monitored using a pair of transducers and indicated using an oscilloscope. The equipment comprises two stainless steel pipes connected to a constant head tank. A service module provides the water supply to the head tank and also incorporates a volumetric tank for flow rate measurement, sump tank, circulating pump and flow control valve.

 

·        Water enters the two test pipes via the constant head tank and discharges into the volumetric tank. A dump valve in the volumetric tank returns the water to the sump tank.

 

·        The pipe surge test section incorporates a clear acrylic surge shaft to enable visualization of its oscillatory characteristics to be demonstrated. A metric scale on the shaft permits the height of the oscillations to be measured. The test pipe terminates with a lever operated gate valve and separate flow control valve.

 

Product Details:

·         CODE: MTS- 101340

·         We are offering a wide range of Coriolis Component Acceleration. This entire set up is designed to study various corioli's components of a slider crank mechanism. In this process the continuous stream of water which is flowing through a steady rotating pair of tubes replaces mechanical slider system. The tubes of the system can be easily rotated in various speeds with the usage of a swinging field motor which also serves a dynamometer. There is a Perspex window located on the top of the tank. This window assures complete clear view of the process. It also prevents the splashing of water over the side of the tank. The in-built dynamometer continuously measures the torque which is applied to the various rotating tubes. This entire equipment is self-contained. The re-circulating of the water is assisted with an own speed control unit and water circulating pump which is separate.

Experimentation

·         To determine Corioli's Component of Acceleration at various speeds of rotation and water flow rates

Utilities Required

·         Electricity

·         0.5 kW, 220 V, Single Phase

·         Drain

·         Water Supply

·         Technical Details:

·         Swinging field type, variable speed

·         Pump

·         FHP

·         The whole set-up is well designed and arranged in a good quality painted structure

·         Fabricated out of stainless steel

·         Rotating arms

·         9mm/6mm orifice diameter, length 300 mm

·         Rotameter

·         Electric motor

·         Main tank

·         Control Panel comprises of:

·         Speed control unit

·         Standard make On/Off switch, mains indicator

·         RPM indicator with proximity sensor

·         RPM measurement

Product Details:

Item code: MTS-101259

Notch Apparatus

we are manufacturing, exporting and supplying highly efficient Notch Apparatus. The offered apparatus is designed by our skilled professionals in compliance with international quality standards. Our provided range is manufactured using the latest technology and the finest raw materials. Moreover, our offered range is tested on various stringent parameters to ensure its durability and quality. Clients can avail this range from us in customized options at industry leading prices.

Features:

• Noiseless & hassle free operations
• Precisely designed
• Low maintenance

Specifications:

• Measuring tank: 1000 mm x 300 mm x 300 mm
• Sump Tank sizes: 300 mm x 300 mm x 600 mm

Additional Information:

• Item Code: MTS-101259
• Port of Dispatch: India
• Delivery Time: 1 Week
• Packaging Details: Box , Carton

Product Details:

LOSSES DUE TO PIPE FITTING, SUDDEN ENLARGEMENT & CONTRACTION APPARATUS

 

CODE: MTK-284CNR 

Specification:

 

·        The set up consists of a ½” bend and elbow, a sudden expansion & sudden contraction fitting from 15mm to 25mm, ball valve and gate valve. Pressure tapings are provided at inlet and outlet of these fittings under test. A differential manometer fitted in the line gives pressure loss of individual fittings. Present setup is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump etc. Flow control valve and by-pass valve are fitted in water line to conduct the experiment on different flow rates. Flow rate of water is measured with the help of measuring tank and stop watch.

·        Sump Tank Capacity: 50 Ltrs

·        Flow Measurement: Using Measuring Tank with Pedometer,

·        Capacity: 25 Ltrs

·        Manometer Fluid: Mercury (Hg) - 250 Gm

·        Sudden Enlargement: From 15 mm to 25 mm

·        Sudden Contraction: From 25 mm to 15 mm

·        Bend: 1/2"

·        Elbow:       1/2"

·        Ball Valve: 1/2"

·        Gate Valve: 1/2"

·        Water Circulation: FHP Pump, Crompton Makes

·        Pressure Drop Measurement: Differential Manometer

·        Stop Watch: Electronic

 

·        Control Panel Comprises Of: Standard Make On/off Switch, Mains Indicator, Etc.

 

Additional Information:

• Item Code: MTK-284CNR
• Production Capacity: 6
• Delivery Time: 2 WEEK

Product Details:

DISCHARGE THROUGH ORIFICE METER APPARATUS

CODE: MTK-6102TM

Specification:

·        Discharge through orifice meter apparatus

·        The apparatus consists of two pipelines emerging out from a common manifold. One pipeline contain a Venturi meter, second contains an Orifice. The pressure tapings from the Venturi meter and Orifice meter are taken to differential manometer to measure pressure difference. The Venturi meter and Orifice meter are connected in parallel and anyone of them can be put in operation by operating valves provided at the downstream. These valves can also regulate the flow. Present Set-up is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump. Flow control valve and by-pass valve are fitted in water line to conduct the experiment on different floe rate. Flow rate of water is measured with the help of measured with the help of measuring tank and stop watch.

EXPERIMENTS:-

·        To determine the Co-efficient of discharged through Venturi meter and Orifice meter

·        To measure discharge through Venturi meter and Orifice meter as flow meters.

UTILITIES: -

·        Water Supply Drain

·        Electricity Supply: Single Phase, 220 VAC, 0.5 kW

TECHNICAL SPECIFICATIONS: -

·         Venturi meter: Material Clear Acrylic, Compatible to 1 Dia pipe

·         Orifice meter: Material Clear Acrylic, Compatible to 1 Dia. Pipe

·         Water Circulation: FHP Pump, Crompton / Sharp make

·         Flow Measurement: Using Measuring Tank, Capacity 25 Ltrs.

·         Sump Tank: Capacity 50 Ltrs.

·         Stop Watch: Electronic

·         Control Panel: On / Off Switch, Mains Indicator etc.

·         Tanks will be made of Stainless Steel

·         The whole Set-up is well designed and arranged in a good quality painted Structure

Additional Information:

• Item Code: MTK-6102TM
• Production Capacity: 5
• Delivery Time: 13 DAYS

Product Details:

CODE: MTK-9745AL DISCHARGE THROUGH VENTURI-METER ORIFICE METER & ROTA-METER APPARATUS

Specification:

·        The present set-up is designed to study three type of flow measuring devices. These are orifice meter, Venturimeter and rotameter. The set-up also facilitates the end user to calculate fluid discharge through these devices. By determining the co-efficient of discharge of venturi meter and orifice meter, these devices can be used as a direct flow meter and can be installed in a fluid line. Rotameter is provided with a pre-calibrated scale. By passing a known flow of fluid through the rotameter and comparing this to provided scale reading, end user can recalibrate the rotameter. The apparatus consists of three pipe lines emerging outfrom a common manifold. All three pipe line has been installed with a test section. One has venturi meter, second has an orifice meter and third one is having a rotameter. The Venturi meter, Orifice meter and Rotameter are connected in parallel and any one of them can be put in operation by operating valves provided at the downstream. Pressure taping from venturi meter and orifice meter are taken out to pressurized differential pressure manometer. Present set-up is self-contained water re-circulating unit, provided with a sump tank, centrifugal pump etc. Water is pumped by means of centrifugal pump and passing through the test sections, it returns back to the sump which make the system re-circulating type. Flow of water is diverted either to measuring tank or sump tank with the means of a flow diverter, when needed. Flow control valve and by-pass valve are fitted in water line to conduct the experiment on different flow rates. Flow rate of water is measured with the help of measuring tank with piezometer and stopwatch. The supplied set-up is complete in all respect. Only water supply and electricity supply is to be provided by the end user for running the set-up.

Product Specification

·        Venturi meter: Body Material Acrylic, compatible to 1 inch Dia. Pipe.

·        Orifice meter:      Body Material Acrylic, compatible to 1 inch Dia. Pipe.

·        Orifice Plate: Made of Stainless Steel

·        Rotameter: Glass Tube Rotameter.

·        Water Circulation: 1/2 HP Pump, Crompton/Standard Make.

·        Flow Measurement: Using Measuring Tank with piezometer Capacity 25 Ltrs.

·       Sump Tank Capacity: 50 Ltrs.

Additional Information:

• Item Code: MTK-9745AL
• Production Capacity: 6
• Delivery Time: 16 days

Product Details:

CODE: MTS-14026  Aerodynamics Trainer

·         We Offer High Quality Aerodynamics Laboratory Trainers For Study Of Basic As Well As Advanced Principles Of Aerodynamic Engineering. Our Product Range Include Modular Air Flow Bench For Study Of Basic Principles Of Aerodynamics & Subsonic Wind Tunnel For Analysis Of Advanced Principles Of Aerodynamics. Wide Range Of Experimental Modules Are Available For Determination Of Drag & Lift Force, Pressure Distribution On Aerofoils, Boundry Layer Analysis, Flow Visualization Etc.

·         Velocity Measurement Of Flows With Pitot Tube

·         Boundary Layer Analysis On A Flat Plate With Flow Along The Plate

·         Drag Of Bodies

·         Demonstration Of The Coanda Effect

·         Visualisation Of Streamlines

·         Together With Appropriate Accessories: Experiments From The Field Of Steady Incompressible Flow

·         Velocity Measurement Of Flows With Pitot Tube And Pitotstatic Tube

·         Free Jets

·         Flow In A Pipe Elbow

·         Proof Of Bernoulli's Principle

Features

·         Flow Velocities Up To 40M/S Possible1

·         Homogeneous Flow Through The Flow Straightener And Special Nozzle Contour1

·         Matching Accessories Offer A Wide Range Of Experiments

Technical Data

·         Radial Fan

·         Power Consumption: 0,37Kw

·         Max. Flow Rate: 15M³/Min

·         Nozzle Exit Cross-Section: 50X100Mm

·         Max. Flow Velocity At The Nozzle Exit: 40M/S

Product Details:

BOUNDARY RAM TEST RIG

CODE: MTK-2014BR

Specification:

The test section of “Boundary Layer Apparatus” has been developed to perform various experiments of aerodynamics and fluid flow. This is a open circuit Wind Tunnel, provides a region of air flow. A layer of fluid, which comes in contact with the boundary surface, adheres to it on account of viscosity, as a real fluid flow past a solid boundary. As a result, ‘no slip’ condition prevails. If the boundary is at rest, the fluid at the boundary has zero velocity and the velocity increases if the fluid is away from the boundary. Thus, there, is a thin layer in the vicinity of the boundary within which the velocity has been affected because of the boundary & viscous effects. This thin layer has been termed as the “Boundary Layer”.

Learning Objectives/Experiments:

·         To study the boundary layer velocity profile.

·         To determine boundary layer thickness & displacement thickness.

·         To determine the exponent in the power-law of velocity distribution.

Required for Operation:

·         Electricity supply: Single phase, 220V AC, 50 Hz, 5-15 amp combined socket with earth connection. Earth voltage should be less than 5 volts.

·         Floor Area: 4 m x 1.5 m.

Technical Specifications:

·         Type: Open Type Wind Tunnel.

·         Test Section: 200 mm x 200 mm.

·         Blower: Compatible Capacity

·         Motor: Compatible Capacity

·         U Tube Manometer: Length 1 m.

·         Pitot tube: Micro Pitot tube with scale arrangement

·         The whole set-up is ingeniously designed and schematically arranged on a powder-coated rigid structure

Control Panel:

·         Standard make On/Off switch, Mains Indicator etc.

·         RPM measurement: RPM Indicator with Proximity sensor.

Additional Information:

• Item Code: MTK-2014BR
• Production Capacity: 5
• Delivery Time: 12 DAYS

Product Details:

DISCHARGE OVER NOTCHES APPARATUS

CODE: MTK-54DO

Specification:

Technical Description:

·        Teknik manufacture of discharge over notches apparatus.

·        The setup consists of a channel having sufficient length and width in which water is supplied from the bottom. Required Notch is fitted at one end of this channel. A pointer gauge with Vernier scale is fitted to measure the height of fluid in flow channel. Arrangement for fixing interchangeable notches is made. Set of three notches, i.e. rectangular notch, 60 V notch 45 V notch is provided along with the set-up. Present set-up is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump etc. Flow control valve and by-pass valve are fitted in water line to conduct the experiment on different flow rates. Flow rate of water is measured with the help of measuring tank and stopwatch.

Technical Specifications:

·       Channel Test Section: Size 600 x 250 x 180 mm.

·       Notches: Material mild steel

·       Rectangular Notch

·       45 V Notch

·       60 V Notch

·       Pointer Gauge: With Vernier scale.

·       Water Circulation: HP pump, ISI make.

·       Flow Measurement: Using Measuring Tank with Piezo-meter, Capacity 45 Ltrs. stainless steel

·       Sump Tank: Capacity 84 Ltrs. stainless steel

·       Stop Watch: Electronic.

·       The whole set-up is ingeniously designed and schematically arranged on a powder-coated rigid structure.

·       Weight: 150 kg

Additional Information:

• Item Code: MTK-54DO
• Production Capacity: 5
• Delivery Time: 2 WEEKS