Solid Waste Treatment Plant

Product Details:

A Common Bio-medical Waste Treatment Facility (CBWTF) is a set up where bio-medical waste, generated from a number of healthcare units, is imparted necessary treatment to reduce adverse effects that this waste may pose. The treated waste may finally be sent for disposal in a landfill or for recycling purposes.

Product Details:

CODE: JKA-230S-1 Technological advancements combined with depleting supplies of natural resources have made it now less expensive to reclaim useful materials from used products than to harvest raw materials from the earth. Items such as used water and soda bottles can be converted into textiles and carpet. Old, worn out car tires can be converted into mats, sports surfacing and roadways. Obsolete electronics and children's toys can be shredded, processed in an automated recovery system, and converted into materials that are used to make similar products over and over again.

·         Shredding is more than just a way to downsize waste for disposal. It is the first step in almost any recycling or material reclamation process. It is one way to help sustain our planet and way of life.

·         The twin shaft shredders are versatile shredders designed for shredding many types of bulky material in the primary stage. The shredders are extremely rugged and have a strong support structure to withstand all loads. "SHREDDERS" are available in a wide range of electrical and hydraulic drive configuration.

·         The housing is solid construction, bolted together. The bearing unit is separate and properly sealed to avoid damage from liquid and solid material, thereby increasing its life. The shredders have low speed, high torque, low noise, low dust and low maintenance. The blades are made from special hardened steel and are easily replaceable. The design of the blades varies according to the material being shredded. Higher capacity shredders are provided with two gear box system ensuring constant torque on both shafts. The shafts are counter rotating and hexagonal in design ensuring excellent griping of the blades.

·         The twin shaft shredders are used for shredding of Medical Waste, Municipal Solid Waste, Wood, Tyres, Plastic, E-waste, Packing material, textile, Drum, Metals, oversize bulky waste, industrial waste, General Waste, Hazardous Waste, end of life equipment and other difficult to shred items.

APPLICATIONS:

·         Wood.

·         Ceramic.

·         Bulky solid wastes.

·         Plastic wastes.

·         Metal.

·         Industrial Paper/Mill waste.

·         Electronic scrap.

·         Construction debris.

CONVEYOR SPECIFICATION:

·         Construction of Conveyor M.S.

·         Construction of Belt PU PVC.

·         Width of the belt 10" to 20".

·         Length of the Conveyor 4 feet to 20 feet.

·         Speed variable 0-60rpm.

·         0.5 to 3HP conveyor motor (ABB/CROMPTON/SIEMEN).

·         Mounted on wheels.

Product Details:

Bio Medical Waste Incinerator, 

Bio Medical Waste Tempo/Van, 

Bio Medical Waste Barcode Tracking System, 

Bio Medical Waste Horizontal Autoclave

 

Product Details:

·         CODE: JKA-230BWT

Product Specification

·         Automation Grade: Semi-Automatic

·         Usage/Application: Medical waste

·         Power Source:  Diesel/Gas/Plasma/Electric

·         Country of Origin: Made in India

·         Brand: Microteknik

Product Description

·         A Common Bio-medical Waste Treatment Facility (CBWTF) is a set up where bio-medical waste, generated from a number of healthcare units, is imparted necessary treatment to reduce adverse effects that this waste may pose. The treated waste may finally be sent for disposal in a landfill or for recycling purposes.

Product Details:

·         CODE: JKA-230BWT

Product Specification

·         Automation Grade: Semi-Automatic

·         Usage/Application: Medical waste

·         Power Source:  Diesel/Gas/Plasma/Electric

·         Country of Origin: Made in India

·         Brand: Microteknik

Product Description

·         A Common Bio-medical Waste Treatment Facility (CBWTF) is a set up where bio-medical waste, generated from a number of healthcare units, is imparted necessary treatment to reduce adverse effects that this waste may pose. The treated waste may finally be sent for disposal in a landfill or for recycling purposes.

Product Details:

·         CODE: JKA-210EWP

·         Type: E Waste Recycling Plant

·         Capacity: 5 (ton/hr)

·         Automation Grade: Fully Automatic

·         Motor Power: 10 HP

·         Voltage: 440 V

·         Power Consumption: 20 Watt

Product Description

·         E waste recycling furnace recycles electronic scrap to recover precious material such as gold, silver and copper.

Product Details:

CODE: JKA-745CH 
Features

Protects incinerator from loading damage

Minimal power consumption

30 seconds cycle (loading) time

Single lever (UP/DOWN) operation

Large loading shelf

Offers more protection to the operator.

Technical Specifications

Cycle Time: 30 seconds

Dimensions (l, w, h): 2.4m x 1.35m x 1.7m

Loading shelf: 2394mm x 1366mm

Waste loading height: 1.3m

Shelf material: Stainless steel

Framework material: Mild steel

Ram specification: 1.0m stainless steel dual-ram

Air compressor: 230V / 50Hz 2 horsepower

Motor Rating: 1000 KG

Product Details:

Code: JKA-100DS 
Disc Screener

The Screens optimize the performance of industrial shredders, transforming the processing line into a more effective, flexible, and efficient system.

The mobile screener becomes a screening system with unsurpassed flexibility.

The sliding hopper is equipped with a dosing screw and enables operation in loop with all shredders: the material enters a processing circle consisting of a shredder and screen and exits only when its fractions reach the established size.

Technical Specification

Capacity: 2 Ton per Hr

Automation Grade: Automatic

Material: Mild Steel

Disc Screen Description

 The Disc Screen consists of rotating discs for separating wastes through the clearance between the discs depending upon the size and the weight of the waste while the wastes move on the rotation discs.

10 to 20 discs are mounted on a long shaft depending on the working width of the screen and the number of the shafts are depending on the capacity of the screen.

These shafts simultaneously rotate by the driving force of the motor.

The screen holes of other size screens are easily clogged by wet wastes due to moisture.

The disc screen minimizes the clogging by the rotation movement of the discs.

Configuration in line after the shredder

Both the stationary screen and the mobile screener are placed in recycling lines after the shredder to separate the ground material into its different fractions.

This makes it possible to take advantage of multiple fractions of the recyclable waste processed.

The screener can also be equipped with diesel or electric drives, which means that it can either operate outdoors or indoors where zero harmful emissions are required.

Configuration in a line before the shredder

Both the stationary screen and the mobile screener can be placed before the shredder in the case of mixed materials to be separated before the shredding process.

An example is the processing of C&D (Construction and Demolition) or C&I (Commercial and Industrial), where the screen separates the fraction with commercial value from waste inert to prevent it from mixing during the shredding phase.

This prevents contamination of the valuable material and reduces wear on the shredder.

Configuration in line between a primary and a secondary shredder

In this scenario, either the stationary screen or the mobile screener is positioned between two shredders to process large quantities of material with the need to remove any dirt likely to produce excessive wear from the shredded material before the secondary shredder; size the clean and finished material (RDF -refuse derived fuel- or Woodchips) as an intermediate fraction; send clean and larger fractions to the secondary shredder.

The efficiency of screens enables the use of a less powerful secondary shredder.

Advantages

Save: It enable users to load the material just once with considerable savings on the cost of the loading equipment work cycles.

Optimize: The loop system ensures that the material leaves the screen only when the desired size is reached.

Simplify: The process eliminates the need for a secondary shredder with remarkable savings on investment and maintenance costs.

Enhance: The Screens makes it possible to increase the value of otherwise undifferentiated waste by recovering multiple fractions of recyclable material.

Reduces wear: Prevents the shredder from being loaded with material which will expose it to greater wear (like sand and stones)

Prevents contamination: Prevents valuable material from being contaminated with waste material

Energy savings: Reduces energy consumption by the shredder

Product Details:

·         CODE: JKA-230BWT

Product Specification

·         Automation Grade: Semi-Automatic

·         Usage/Application: Medical waste

·         Power Source:  Diesel/Gas/Plasma/Electric

·         Country of Origin: Made in India

·         Brand: Microteknik

Product Description

·         A Common Bio-medical Waste Treatment Facility (CBWTF) is a set up where bio-medical waste, generated from a number of healthcare units, is imparted necessary treatment to reduce adverse effects that this waste may pose. The treated waste may finally be sent for disposal in a landfill or for recycling purposes.

Product Details:

·         Bio medical waste  Incinerator, 

·         Shredder, 

·         Fatka machine, 

·         Bailing Machine, 

Product Details:

·         CODE: JKA-230BWT

Product Specification

·         Automation Grade: Semi-Automatic

·         Usage/Application: Medical waste

·         Power Source:  Diesel/Gas/Plasma/Electric

·         Country of Origin: Made in India

·         Brand: Microteknik

Product Description

·         A Common Bio-medical Waste Treatment Facility (CBWTF) is a set up where bio-medical waste, generated from a number of healthcare units, is imparted necessary treatment to reduce adverse effects that this waste may pose. The treated waste may finally be sent for disposal in a landfill or for recycling purposes.

Product Details:

·         CODE: JKA-230BWT

Product Specification

·         Automation Grade: Semi-Automatic

·         Usage/Application: Medical waste

·         Power Source:  Diesel/Gas/Plasma/Electric

·         Country of Origin: Made in India

·         Brand: Microteknik

Product Description

·         A Common Bio-medical Waste Treatment Facility (CBWTF) is a set up where bio-medical waste, generated from a number of healthcare units, is imparted necessary treatment to reduce adverse effects that this waste may pose. The treated waste may finally be sent for disposal in a landfill or for recycling purposes.

Product Details:

CODE: MTH-254WS Teknik has been providing cost effective and dependable medical, infectious and hazardous waste solutions

Product Details:

Code: MT-114B 
 Number Of Stops: 0-5

Required Part: Elevator Washers

Material: Stainless Steel

Weight: STANDARD

Country of Origin: Made in India

Product Description

TIPPLER - LIFTING & TIPPING DEVICE

Easy dusts free unloading of FDB Bowl with inline size reduction technic

Application & Process:

The Tippler-Lifting and tipping device is a hydraulic device which is having an arm used for lifting and turning FBD bowl by 180. Thus it is used to unload fluid bed dryer bowl material in to Cone mill OR Multi mill OR Oscillating granulator in a dust free way for downsizing or dry milling. The operation is completely dust free and eliminates manual handling or scooping. The FBD Bowl is placed beneath the Tipper. The inverted cone of the Tipper is lowered so that the brim flange of the bowl touches the inverted cone. Both are clamped together with quick fixing clamps. The whole assembly is raised.

Salient Features:

Capacity available 30 Kg to 600 Kg.

Unloaded material with inline process with cone mill, granulator with IBC Bin for dust free process. Fully automatic system, with hydraulic lifting and tipping arrangement for quick and easy handling Eliminates tedious and unhygienic manual handling of products.

Tilting arrangement with a single point pivot ensures GMP with ease of operations. 180 degree swiveling of vertical mast with vertical lift and tippling ensures motion in all three dimensions as required. Discharge cone is fitted with a 250mm diameter butterfly valve at bottom with silicone rubber seat.

Can be provided with pneumatic actuator for opening or closing butterfly valve without reaching for it by pneumatic controls.

Hydraulic power pack can be mounted over the service floor so the column of the tipper acts as pendent and through the hollow pivot shaft, hydraulic lines along with electric cables can travel above the working area slab. Suitable view glass window provided on the conical tapering portion of the tipper, which acts like a view window.

Stainless steel lift yoke with integral rotation drives for rotation of discharge cone and container.

Product Details:

Teknik is designed to maximise throughput and product shape in a wide range of crushing applications. The inclusion of a plant mounted double deck vibrating screen allows for oversize material to be re circulated for re crushing and for sized end products. Its cost effectiveness is justified by its low fuel consumption, low operating and maintenance costs as well as high capacity and environmental friendly

Salient Features

Heavy duty track unit with dual speed configuration

Safety guards in compliance with machinery directive sturdy walkway with handrail and access ladders.

Dual power mode - flexibility to power the plant either by external electric connection or by on-board diesel generator power pack unit (optional).

Radio remote control for marching (optional).Feed level sensor for crusher

PLC drive, Metal detector and Sensor control system & four-point emergency stop.

Electrical driven hydraulic system for quick setup & marching. Low noise acoustic engine canopy with overload protection

Product Details:

Item Code: JKA-230MSW A trommel machine in Municipal Solid Waste (MSW) management is a cylindrical, rotating drum equipped with perforated screens. It efficiently sorts and classifies waste materials by size, allowing for the separation of recyclables, organics, and larger items from the waste stream. Trommel machines are essential tools for optimizing MSW handling and promoting sustainable waste management practices.

The need of trommel machines in Municipal Solid Waste (MSW) management is indispensable due to the complex and diverse nature of urban waste. These machines play a critical role in several aspects of MSW handling and processing. Trommel machines are also crucial for preparing waste for further processing. Once materials are separated and contaminants removed, they can be more easily processed into secondary products. This includes shredding or compacting materials for recycling or converting organic matter into compost, which can be used to enrich soil in agriculture and landscaping. The need for trommel machines in MSW management lies in their ability to streamline waste handling, enhance recycling efforts, reduce landfill waste, and prepare materials for further processing. By aiding in the separation and classification of waste, these machines contribute to more sustainable and environmentally friendly waste management practices, promoting resource recovery and waste reduction.

Operation

Feeding Hopper Unit: Municipal Solid Waste is feed into the machine through an in feed hopper.

This is where waste is initially loaded onto the trommel for processing.

Feed Conveyors: A conveyor system transports the waste materials onto the trommel screen. This system ensures a consistent and steady flow of waste into the machine.

Trommel Screen: Trommel screen is installed in a small angle with the input end a little higher than the output end. Material fed into the trommel screen is lifted up by the rotation and aerated as it falls back down.

This action is repeated with each revolution along the length of the drum. The smaller fractions pass through the screen openings while the larger fractions tumble towards its eventual exit at the rear of the drum.

Process Conveyor: Smaller particles like fines and smaller recyclables, fall through the holes from the Trommel drum and are usually directed in process conveyor.

Reject Conveyor: After materials are separated by the trommel, they are directed towards specific discharge conveyor belts.

These Conveyor guide the materials to their respective sorting or processing areas.

Control Panel: A control panel allows operators to manage and monitor the machine's operation.

It includes controls for the motor, speed settings, and other operational parameters.

 

Basic Features

Simple and mechanically more robust.

Product Details:

Item Code: JKA-230MSW A trommel machine in Municipal Solid Waste (MSW) management is a cylindrical, rotating drum equipped with perforated screens. It efficiently sorts and classifies waste materials by size, allowing for the separation of recyclables, organics, and larger items from the waste stream. Trommel machines are essential tools for optimizing MSW handling and promoting sustainable waste management practices.

The need of trommel machines in Municipal Solid Waste (MSW) management is indispensable due to the complex and diverse nature of urban waste. These machines play a critical role in several aspects of MSW handling and processing. Trommel machines are also crucial for preparing waste for further processing. Once materials are separated and contaminants removed, they can be more easily processed into secondary products. This includes shredding or compacting materials for recycling or converting organic matter into compost, which can be used to enrich soil in agriculture and landscaping. The need for trommel machines in MSW management lies in their ability to streamline waste handling, enhance recycling efforts, reduce landfill waste, and prepare materials for further processing. By aiding in the separation and classification of waste, these machines contribute to more sustainable and environmentally friendly waste management practices, promoting resource recovery and waste reduction.

Operation

Feeding Hopper Unit: Municipal Solid Waste is feed into the machine through an in feed hopper.

This is where waste is initially loaded onto the trommel for processing.

Feed Conveyors: A conveyor system transports the waste materials onto the trommel screen. This system ensures a consistent and steady flow of waste into the machine.

Trommel Screen: Trommel screen is installed in a small angle with the input end a little higher than the output end. Material fed into the trommel screen is lifted up by the rotation and aerated as it falls back down.

This action is repeated with each revolution along the length of the drum. The smaller fractions pass through the screen openings while the larger fractions tumble towards its eventual exit at the rear of the drum.

Process Conveyor: Smaller particles like fines and smaller recyclables, fall through the holes from the Trommel drum and are usually directed in process conveyor.

Reject Conveyor: After materials are separated by the trommel, they are directed towards specific discharge conveyor belts.

These Conveyor guide the materials to their respective sorting or processing areas.

Control Panel: A control panel allows operators to manage and monitor the machine's operation.

It includes controls for the motor, speed settings, and other operational parameters.

 

Basic Features

Simple and mechanically more robust.

Product Details:

Teknik is designed to maximise throughput and product shape in a wide range of crushing applications. The inclusion of a plant mounted double deck vibrating screen allows for oversize material to be re circulated for re crushing and for sized end products. Its cost effectiveness is justified by its low fuel consumption, low operating and maintenance costs as well as high capacity and environmental friendly

Salient Features

Heavy duty track unit with dual speed configuration

Safety guards in compliance with machinery directive sturdy walkway with handrail and access ladders.

Dual power mode - flexibility to power the plant either by external electric connection or by on-board diesel generator power pack unit (optional).

Radio remote control for marching (optional).Feed level sensor for crusher

PLC drive, Metal detector and Sensor control system & four-point emergency stop.

Electrical driven hydraulic system for quick setup & marching. Low noise acoustic engine canopy with overload protection

Product Details:

·         CODE: JKA-230MSW

·         A trommel machine in Municipal Solid Waste (MSW) management is a cylindrical, rotating drum equipped with perforated screens. It efficiently sorts and classifies waste materials by size, allowing for the separation of recyclables, organics, and larger items from the waste stream. Trommel machines are essential tools for optimizing MSW handling and promoting sustainable waste management practices.

·         The need of trommel machines in Municipal Solid Waste (MSW) management is indispensable due to the complex and diverse nature of urban waste. These machines play a critical role in several aspects of MSW handling and processing. Trommel machines are also crucial for preparing waste for further processing. Once materials are separated and contaminants removed, they can be more easily processed into secondary products. This includes shredding or compacting materials for recycling or converting organic matter into compost, which can be used to enrich soil in agriculture and landscaping. The need for trommel machines in MSW management lies in their ability to streamline waste handling, enhance recycling efforts, reduce landfill waste, and prepare materials for further processing. By aiding in the separation and classification of waste, these machines contribute to more sustainable and environmentally friendly waste management practices, promoting resource recovery and waste reduction.

Operation

·         Feeding Hopper Unit: Municipal Solid Waste is feed into the machine through an in feed hopper.

·         This is where waste is initially loaded onto the trommel for processing.

·         Feed Conveyors: A conveyor system transports the waste materials onto the trommel screen. This system ensures a consistent and steady flow of waste into the machine.

·         Trommel Screen: Trommel screen is installed in a small angle with the input end a little higher than the output end. Material fed into the trommel screen is lifted up by the rotation and aerated as it falls back down.

·         This action is repeated with each revolution along the length of the drum. The smaller fractions pass through the screen openings while the larger fractions tumble towards its eventual exit at the rear of the drum.

·         Process Conveyor: Smaller particles like fines and smaller recyclables, fall through the holes from the Trommel drum and are usually directed in process conveyor.

·         Reject Conveyor: After materials are separated by the trommel, they are directed towards specific discharge conveyor belts.

·         These Conveyor guide the materials to their respective sorting or processing areas.

·         Control Panel: A control panel allows operators to manage and monitor the machine's operation.

·         It includes controls for the motor, speed settings, and other operational parameters.

 

 

Product Details:

Item Code: JKA-230MSW A trommel machine in Municipal Solid Waste (MSW) management is a cylindrical, rotating drum equipped with perforated screens. It efficiently sorts and classifies waste materials by size, allowing for the separation of recyclables, organics, and larger items from the waste stream. Trommel machines are essential tools for optimizing MSW handling and promoting sustainable waste management practices.

The need of trommel machines in Municipal Solid Waste (MSW) management is indispensable due to the complex and diverse nature of urban waste. These machines play a critical role in several aspects of MSW handling and processing. Trommel machines are also crucial for preparing waste for further processing. Once materials are separated and contaminants removed, they can be more easily processed into secondary products. This includes shredding or compacting materials for recycling or converting organic matter into compost, which can be used to enrich soil in agriculture and landscaping. The need for trommel machines in MSW management lies in their ability to streamline waste handling, enhance recycling efforts, reduce landfill waste, and prepare materials for further processing. By aiding in the separation and classification of waste, these machines contribute to more sustainable and environmentally friendly waste management practices, promoting resource recovery and waste reduction.

Operation

Feeding Hopper Unit: Municipal Solid Waste is feed into the machine through an in feed hopper.

This is where waste is initially loaded onto the trommel for processing.

Feed Conveyors: A conveyor system transports the waste materials onto the trommel screen. This system ensures a consistent and steady flow of waste into the machine.

Trommel Screen: Trommel screen is installed in a small angle with the input end a little higher than the output end. Material fed into the trommel screen is lifted up by the rotation and aerated as it falls back down.

This action is repeated with each revolution along the length of the drum. The smaller fractions pass through the screen openings while the larger fractions tumble towards its eventual exit at the rear of the drum.

Process Conveyor: Smaller particles like fines and smaller recyclables, fall through the holes from the Trommel drum and are usually directed in process conveyor.

Reject Conveyor: After materials are separated by the trommel, they are directed towards specific discharge conveyor belts.

These Conveyor guide the materials to their respective sorting or processing areas.

Control Panel: A control panel allows operators to manage and monitor the machine's operation.

It includes controls for the motor, speed settings, and other operational parameters.

 

Basic Features

Simple and mechanically more robust.

Product Details:

Code: MT-98SH  
Capacity: Up to 3000 Kg

Type: Single Girder

Max Height: 60-80 feet

Material: MS

Power Source: Electric

Phase:       Single Phase

Voltage: 220 V

Features:

Fully motorized operations

Low maintenance

High tensile strength

Long working life

Easy to operate

Product Details:

Code: MT-98SH   
Capacity: Up to 3000 Kg

Type: Single Girder

Max Height: 60-80 feet

Material: MS

Power Source: Electric

Phase:       Single Phase

Voltage: 220 V

Features:

Fully motorized operations

Low maintenance

High tensile strength

Long working life

Easy to operate

Product Details:

Item Code: JKA-230MSW A trommel machine in Municipal Solid Waste (MSW) management is a cylindrical, rotating drum equipped with perforated screens. It efficiently sorts and classifies waste materials by size, allowing for the separation of recyclables, organics, and larger items from the waste stream. Trommel machines are essential tools for optimizing MSW handling and promoting sustainable waste management practices.

The need of trommel machines in Municipal Solid Waste (MSW) management is indispensable due to the complex and diverse nature of urban waste. These machines play a critical role in several aspects of MSW handling and processing. Trommel machines are also crucial for preparing waste for further processing. Once materials are separated and contaminants removed, they can be more easily processed into secondary products. This includes shredding or compacting materials for recycling or converting organic matter into compost, which can be used to enrich soil in agriculture and landscaping. The need for trommel machines in MSW management lies in their ability to streamline waste handling, enhance recycling efforts, reduce landfill waste, and prepare materials for further processing. By aiding in the separation and classification of waste, these machines contribute to more sustainable and environmentally friendly waste management practices, promoting resource recovery and waste reduction.

Operation

Feeding Hopper Unit: Municipal Solid Waste is feed into the machine through an in feed hopper.

This is where waste is initially loaded onto the trommel for processing.

Feed Conveyors: A conveyor system transports the waste materials onto the trommel screen. This system ensures a consistent and steady flow of waste into the machine.

Trommel Screen: Trommel screen is installed in a small angle with the input end a little higher than the output end. Material fed into the trommel screen is lifted up by the rotation and aerated as it falls back down.

This action is repeated with each revolution along the length of the drum. The smaller fractions pass through the screen openings while the larger fractions tumble towards its eventual exit at the rear of the drum.

Process Conveyor: Smaller particles like fines and smaller recyclables, fall through the holes from the Trommel drum and are usually directed in process conveyor.

Reject Conveyor: After materials are separated by the trommel, they are directed towards specific discharge conveyor belts.

These Conveyor guide the materials to their respective sorting or processing areas.

Control Panel: A control panel allows operators to manage and monitor the machine's operation.

It includes controls for the motor, speed settings, and other operational parameters.

 

Basic Features

Simple and mechanically more robust.

Product Details:

CODE: MT-VAN USAGE

·         Bio-medical waste management

·         Bio-medical waste collection transports. Extremely effective in door to door collection in small cities also

USPs

·         Aesthetically attractive

·         Optimised design

·         Excellent value for money

·         Designed accordance to Bio-medical waste guidelines

·         Different color codes have been in corporated as per the Bio-medical waste categories

·         Well-balanced super structure

·         Functionality convenient

·         Operationally economical

·         Loaded with all standard ape' vehicles USP

SPECIALLY DESIGNED FOR

·         Bio-medical waste contractors

·         Hospital committee's in cities

·         Big-hospitals

·         Local Municipalities, pollution control boards

·         Environment & waste consultants

·         Vet. Clinics

·         Diagnostic centres, pathological labs

Product Details:

Item Code: JKA-230MSW A trommel machine in Municipal Solid Waste (MSW) management is a cylindrical, rotating drum equipped with perforated screens. It efficiently sorts and classifies waste materials by size, allowing for the separation of recyclables, organics, and larger items from the waste stream. Trommel machines are essential tools for optimizing MSW handling and promoting sustainable waste management practices.

The need of trommel machines in Municipal Solid Waste (MSW) management is indispensable due to the complex and diverse nature of urban waste. These machines play a critical role in several aspects of MSW handling and processing. Trommel machines are also crucial for preparing waste for further processing. Once materials are separated and contaminants removed, they can be more easily processed into secondary products. This includes shredding or compacting materials for recycling or converting organic matter into compost, which can be used to enrich soil in agriculture and landscaping. The need for trommel machines in MSW management lies in their ability to streamline waste handling, enhance recycling efforts, reduce landfill waste, and prepare materials for further processing. By aiding in the separation and classification of waste, these machines contribute to more sustainable and environmentally friendly waste management practices, promoting resource recovery and waste reduction.

Operation

Feeding Hopper Unit: Municipal Solid Waste is feed into the machine through an in feed hopper.

This is where waste is initially loaded onto the trommel for processing.

Feed Conveyors: A conveyor system transports the waste materials onto the trommel screen. This system ensures a consistent and steady flow of waste into the machine.

Trommel Screen: Trommel screen is installed in a small angle with the input end a little higher than the output end. Material fed into the trommel screen is lifted up by the rotation and aerated as it falls back down.

This action is repeated with each revolution along the length of the drum. The smaller fractions pass through the screen openings while the larger fractions tumble towards its eventual exit at the rear of the drum.

Process Conveyor: Smaller particles like fines and smaller recyclables, fall through the holes from the Trommel drum and are usually directed in process conveyor.

Reject Conveyor: After materials are separated by the trommel, they are directed towards specific discharge conveyor belts.

These Conveyor guide the materials to their respective sorting or processing areas.

Control Panel: A control panel allows operators to manage and monitor the machine's operation.

It includes controls for the motor, speed settings, and other operational parameters.

 

Basic Features

Simple and mechanically more robust.

Product Details:

Item Code: JKA-230MSW A trommel machine in Municipal Solid Waste (MSW) management is a cylindrical, rotating drum equipped with perforated screens. It efficiently sorts and classifies waste materials by size, allowing for the separation of recyclables, organics, and larger items from the waste stream. Trommel machines are essential tools for optimizing MSW handling and promoting sustainable waste management practices.

The need of trommel machines in Municipal Solid Waste (MSW) management is indispensable due to the complex and diverse nature of urban waste. These machines play a critical role in several aspects of MSW handling and processing. Trommel machines are also crucial for preparing waste for further processing. Once materials are separated and contaminants removed, they can be more easily processed into secondary products. This includes shredding or compacting materials for recycling or converting organic matter into compost, which can be used to enrich soil in agriculture and landscaping. The need for trommel machines in MSW management lies in their ability to streamline waste handling, enhance recycling efforts, reduce landfill waste, and prepare materials for further processing. By aiding in the separation and classification of waste, these machines contribute to more sustainable and environmentally friendly waste management practices, promoting resource recovery and waste reduction.

Operation

Feeding Hopper Unit: Municipal Solid Waste is feed into the machine through an in feed hopper.

This is where waste is initially loaded onto the trommel for processing.

Feed Conveyors: A conveyor system transports the waste materials onto the trommel screen. This system ensures a consistent and steady flow of waste into the machine.

Trommel Screen: Trommel screen is installed in a small angle with the input end a little higher than the output end. Material fed into the trommel screen is lifted up by the rotation and aerated as it falls back down.

This action is repeated with each revolution along the length of the drum. The smaller fractions pass through the screen openings while the larger fractions tumble towards its eventual exit at the rear of the drum.

Process Conveyor: Smaller particles like fines and smaller recyclables, fall through the holes from the Trommel drum and are usually directed in process conveyor.

Reject Conveyor: After materials are separated by the trommel, they are directed towards specific discharge conveyor belts.

These Conveyor guide the materials to their respective sorting or processing areas.

Control Panel: A control panel allows operators to manage and monitor the machine's operation.

It includes controls for the motor, speed settings, and other operational parameters.

 

Basic Features

Simple and mechanically more robust.

Product Details:

Item Code: JKA-230MSW A trommel machine in Municipal Solid Waste (MSW) management is a cylindrical, rotating drum equipped with perforated screens. It efficiently sorts and classifies waste materials by size, allowing for the separation of recyclables, organics, and larger items from the waste stream. Trommel machines are essential tools for optimizing MSW handling and promoting sustainable waste management practices.

The need of trommel machines in Municipal Solid Waste (MSW) management is indispensable due to the complex and diverse nature of urban waste. These machines play a critical role in several aspects of MSW handling and processing. Trommel machines are also crucial for preparing waste for further processing. Once materials are separated and contaminants removed, they can be more easily processed into secondary products. This includes shredding or compacting materials for recycling or converting organic matter into compost, which can be used to enrich soil in agriculture and landscaping. The need for trommel machines in MSW management lies in their ability to streamline waste handling, enhance recycling efforts, reduce landfill waste, and prepare materials for further processing. By aiding in the separation and classification of waste, these machines contribute to more sustainable and environmentally friendly waste management practices, promoting resource recovery and waste reduction.

Operation

Feeding Hopper Unit: Municipal Solid Waste is feed into the machine through an in feed hopper.

This is where waste is initially loaded onto the trommel for processing.

Feed Conveyors: A conveyor system transports the waste materials onto the trommel screen. This system ensures a consistent and steady flow of waste into the machine.

Trommel Screen: Trommel screen is installed in a small angle with the input end a little higher than the output end. Material fed into the trommel screen is lifted up by the rotation and aerated as it falls back down.

This action is repeated with each revolution along the length of the drum. The smaller fractions pass through the screen openings while the larger fractions tumble towards its eventual exit at the rear of the drum.

Process Conveyor: Smaller particles like fines and smaller recyclables, fall through the holes from the Trommel drum and are usually directed in process conveyor.

Reject Conveyor: After materials are separated by the trommel, they are directed towards specific discharge conveyor belts.

These Conveyor guide the materials to their respective sorting or processing areas.

Control Panel: A control panel allows operators to manage and monitor the machine's operation.

It includes controls for the motor, speed settings, and other operational parameters.

 

Basic Features

Simple and mechanically more robust.

Product Details:

Item Code: JKA-230MSW A trommel machine in Municipal Solid Waste (MSW) management is a cylindrical, rotating drum equipped with perforated screens. It efficiently sorts and classifies waste materials by size, allowing for the separation of recyclables, organics, and larger items from the waste stream. Trommel machines are essential tools for optimizing MSW handling and promoting sustainable waste management practices.

The need of trommel machines in Municipal Solid Waste (MSW) management is indispensable due to the complex and diverse nature of urban waste. These machines play a critical role in several aspects of MSW handling and processing. Trommel machines are also crucial for preparing waste for further processing. Once materials are separated and contaminants removed, they can be more easily processed into secondary products. This includes shredding or compacting materials for recycling or converting organic matter into compost, which can be used to enrich soil in agriculture and landscaping. The need for trommel machines in MSW management lies in their ability to streamline waste handling, enhance recycling efforts, reduce landfill waste, and prepare materials for further processing. By aiding in the separation and classification of waste, these machines contribute to more sustainable and environmentally friendly waste management practices, promoting resource recovery and waste reduction.

Operation

Feeding Hopper Unit: Municipal Solid Waste is feed into the machine through an in feed hopper.

This is where waste is initially loaded onto the trommel for processing.

Feed Conveyors: A conveyor system transports the waste materials onto the trommel screen. This system ensures a consistent and steady flow of waste into the machine.

Trommel Screen: Trommel screen is installed in a small angle with the input end a little higher than the output end. Material fed into the trommel screen is lifted up by the rotation and aerated as it falls back down.

This action is repeated with each revolution along the length of the drum. The smaller fractions pass through the screen openings while the larger fractions tumble towards its eventual exit at the rear of the drum.

Process Conveyor: Smaller particles like fines and smaller recyclables, fall through the holes from the Trommel drum and are usually directed in process conveyor.

Reject Conveyor: After materials are separated by the trommel, they are directed towards specific discharge conveyor belts.

These Conveyor guide the materials to their respective sorting or processing areas.

Control Panel: A control panel allows operators to manage and monitor the machine's operation.

It includes controls for the motor, speed settings, and other operational parameters.

 

Basic Features

Simple and mechanically more robust.

Product Details:

·         Item Code: JKA-230MSW A trommel machine in Municipal Solid Waste (MSW) management is a cylindrical, rotating drum equipped with perforated screens. It efficiently sorts and classifies waste materials by size, allowing for the separation of recyclables, organics, and larger items from the waste stream. Trommel machines are essential tools for optimizing MSW handling and promoting sustainable waste management practices.

·         The need of trommel machines in Municipal Solid Waste (MSW) management is indispensable due to the complex and diverse nature of urban waste. These machines play a critical role in several aspects of MSW handling and processing. Trommel machines are also crucial for preparing waste for further processing. Once materials are separated and contaminants removed, they can be more easily processed into secondary products. This includes shredding or compacting materials for recycling or converting organic matter into compost, which can be used to enrich soil in agriculture and landscaping. The need for trommel machines in MSW management lies in their ability to streamline waste handling, enhance recycling efforts, reduce landfill waste, and prepare materials for further processing. By aiding in the separation and classification of waste, these machines contribute to more sustainable and environmentally friendly waste management practices, promoting resource recovery and waste reduction.

Operation

·         Feeding Hopper Unit: Municipal Solid Waste is feed into the machine through an in feed hopper.

·         This is where waste is initially loaded onto the trommel for processing.

·         Feed Conveyors: A conveyor system transports the waste materials onto the trommel screen. This system ensures a consistent and steady flow of waste into the machine.

·         Trommel Screen: Trommel screen is installed in a small angle with the input end a little higher than the output end. Material fed into the trommel screen is lifted up by the rotation and aerated as it falls back down.

·         This action is repeated with each revolution along the length of the drum. The smaller fractions pass through the screen openings while the larger fractions tumble towards its eventual exit at the rear of the drum.

·         Process Conveyor: Smaller particles like fines and smaller recyclables, fall through the holes from the Trommel drum and are usually directed in process conveyor.

·         Reject Conveyor: After materials are separated by the trommel, they are directed towards specific discharge conveyor belts.

·         These Conveyor guide the materials to their respective sorting or processing areas.

·         Control Panel: A control panel allows operators to manage and monitor the machine's operation.

·         It includes controls for the motor, speed settings, and other operational parameters.

Product Details:

JKA-230BWI PORTABLE WASTE INCINERATOR

• A waste incinerator is a machine that is used for burning solid and semi solid waste.

• This waste is usually generated from canteens, kitchens, garbage bins etc.

• Bio medical waste (such as bandages, syringes, plasters, needles etc.) do not fall into this category.

• The burning of the waste can be either electric or oil fired. In remote areas oil fired and small portable waste incinerators are preferred because of obvious benefits.

• Brand and Make: Teknik, Microteknik

• Outer Body: M.S. Sheet 4mm thick.

• Outer Body Paint: Heat Resistant Aluminium Paint

• Main Body Outer Dimensions: 800 mm diameter & 1100 mm height.

• Top lid: Removable (Flange & Nut Bolt)

• Exhaust Pipe Outlet (M.S): 120 mm diameter

• Internal Lining (Bottom, Sides & Top): Fire Bricks & Fire Proof Cement

• Bottom & Top Lining: 50mm

• Side Wall Lining: 100mm

• Garbage Entry Door: 400 mm wide & 600 mm high

• Fresh Air Blower Power: 0.25 HP

• Fresh Air Blower Air Flow: 270-330 m3/hr

• Fresh Air Inlet Pipe (Top & Bottom): 50 mm x50 mm square pipe

• Fresh Air Inlet Adjustment: Through Ball Vales

• Oil Burner Capacity: 30KW

• Oil Tank Capacity: 100 Litres

• Volume of Burning Chamber: 0.3 m3

• Garbage Burning Rate 50 kgs per hour

• Weight: 450 kgs +/- 20kgs