Anatomical Models

Product Details:

Mechanism Models     MTK-8095

Our company is commited in manufacturing and supplying extensive variety of Mechanics Models to our valuable clients. Manufactured using high quality raw material, these equipments are known for their durability and reliability. The array of products includes: Friction Wheel Drive, Geneva Drive, Crank & Connecting Rod Model, Four Bar Link Mechanism, Elipse Tracer Model, Kinematic Pairs, Triangular Eccentric Cam, Double Shoe Brake. Scientific Instruments,Laboratory Lab Equipment. Some of the products sold by the company are Mechanism Models Equipments, Theory Of Machines Lab Models, Air Conditioning Lab Models, Civil Engineering Models, Mass Transfer Lab Models, Momentum Transfer Lab Models.

Additional Information:

• Item Code: MTK-8095
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Production Capacity: 520
• Delivery Time: 1 week
• Packaging Details: box available

Product Details:

Disc Brake Model   MTS-101053


Disc Brake Model Engineering Training Model, technical teaching equipment for engineering. Properly constructed model, complete on base with operating lever.Constructed, section cut model.

Product Details:

Disc Brake Model

Product Code- 101053A

Disc Brake Model Engineering Training Model, technical teaching equipment for engineering.

Product Details:

Air Brake Actual Working Model      MTK-8088

Air Brake Actual Working Engineering Training Model for engineering schools. Air Brake Actual Working Engineering Training Model, technical teaching equipment for engineering.

Product Details:

Triangular Eccentric Cam MTS-101044

Triangular Eccentric Cam Model Engineering Training Model for engineering schools.
The model shows Intermittent reciprocating rectilinear motion in Yoke from Complete mounted on board.

Product Details:

Single Brake Shoe Model 

Product Code-101048

Single Brake Shoe Model Engineering Training Model for engineering schools.The model consists of a brake drum, mounted on a shaft free to rotate in bearings, provided with brake lever, complete on cast iron machined base.

Product Details:

Crank and Slotted Link Mechanism  MTS-101034

Crank and Slotted Link Mechanism Model Engineering Training Model for engineering schools.
constructed model fitted wooden base boards.

Product Details:

Universal Coupling Model MTK-8090

Properly constructed all metallic model.

Product Details:

Claw Clutch Model  MTS-101093

Constructed model, one part having sliding groove. Complete on base with operating lever.

Product Details:

Internal Gear Pinion Drive  MTS-10973

Internal Gear Pinion Drive Engineering Training Model for engineering schools. technical teaching equipment for engineering.

Product Details:

Mechanical Brake System Model   MTS-101058

Mechanical brake system as used in two wheelers, is made from original but reconditioned parts. Complete with operating lever, brake pedal, brakedrum and necessary linkage. Working of mechanical brake can be demonstrated by pressing the pedal. Mounted on a sturdy base.

Product Details:

Conical Friction Clutch Model   MTS-109268

Properly constructed model.One part having sliding groove Complete on base with operating lever.

Product Details:

Multiplate Clutch Model  MTK-8087A

A properly constructed all metallic model mounted on metal base with handle drive arrangement.

Product Details:

Hooks Coupling Model     MTS-101085

Single, Properly constructed, complete with pointer and scale, graduated in degrees.

Product Details:

Plate Clutch Model MTK-8086

Properly constructed,complete on base with operating lever.

Product Details:

Hydraulic Brake Unit    MTS-101055


To demonstrate the working of an Hydraulic Brake as used in automobiles and other applications. Consists of a metal disc 4inch(100mm) in dia., which is simulated as a wheel of a car, which is rotated with the help of a motor. Two pads mounted in brackets on each sides act like the brake pads. These pads are connected by tubing to a syringe, simulation of the brake pedal. On tuning the motor on which in turn turns the disc, when the syringe is depressed, the air in the syringe, simulation of brake fluid, it makes the pads go forward and bring the disc to stop. On releasing the plunger the pads go their normal position and the wheel starts to rotate again. The whole unit mounted on a strong wooden base. battery holder with alligator clips included. Operates on batteries, not included.

• Base: 13 inch(330 mm) x 7 inch(180 mm) x 0.68 Inch (17 mm).
• Total Height of Unit, upto the Disc Top: 6.5 Inch (165 mm).
• A preview of the included instructions can be found at the bottom of this listing.
• Measurements are approximate.

Product Details:

Hydraulic Brake Unit Two Brake Drums MTK-8094

Unit consists of original but reconditioned components such as master cylinder brake drum complete with brake shoes and brake cylinders, brake pedal and necessary connections. In normal condition the brake drum can be easily rotated by the handle but on pressing the brake pedal, brake fluid in master cylinder is forced in brake cylinders thus expanding the brake shoes and stopping the rotation of drum. Brake drum is sectioned.

Product Details:

Centrifugal Clutch Model   MTK-8085

The model consists of a drum pulley mounted on the output shaft. The input shaft carrying spring controlled fly weights. The worming can be demonstrated by rotating the input shaft provided with crank handle. The output shaft rotates with clutch action.

Product Details:

Internally Expanding Brake Model MTS-101052

The model consists of a hollow drum, two shoes are pivoted pins. Braking action can be seen due to application of the force on the cantiever.

Product Details:

Oldham Coupling Model    MTK-8092

Oldham Coupling Engineering Training Model for engineering schools. technical teaching equipment for engineering.

• To illustrate the transmission between two shafts
• Which are not coaxial. Complete on base.

Product Details:

Hydraulic Brake Unit Four Brake Drums  MTS-101057

Same as above but with two master cylinders and with four brake drums. One of the master cylinder is suitably sectionized. Suitably mounted on heavy wooden base with operating brake pedal and lever.

Product Details:

Power Brake Actual Working Model MTS-101059

Specification of Power Brake Actual Working

Power brake system made from original reconditioned parts.
Completed with operating lever and mounted on heavy wooden base. Shows the actual working of a power brake. Complete setup

Additional Information:

• Production Capacity: Ready Stock
• Delivery Time: 1 Week
• Packaging Details: Box , Carton

Product Details:

Disc Brake Actual Working

Model No : MTS-101054

Made from original reconditioned parts. Mounted on a sturdy base.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: Ready Stock
• Delivery Time: 2 Days
• Packaging Details: Box , Carton

Product Details:

Socket and Spigot Joint Model MTK-8093

Socket and Spigot Joint - Model Engineering Training Model, technical teaching equipment for engineering.
Constructed, section cut model.

Product Details:

Bearing Model     MTK-8091

(A) Ball Bearings.
(B) Roller Bearing.
(C) Taper Bearing.
(D) Thrust Bearing.

Bearing: Of 25mm size regional bearing duly mounted on polished base.

Product Details:

Flexible Coupling Model  MTK-8089
The model is properly made to understand the type of shock absorbing coupling

Product Details:

MT-354Q
Biological Models
•    2 Lumbar Vertebrae/ 3 Lumbar Vertebrae, 3 Parts Human Skull (numbered)
•    5TH Cervical Vertebra, Adenovirus, Advanced Osteoporosis Model, Amphioxus
•    Anatomy Of The Hand, 3 Parts,  Anatomy Of The Neck, Animal Cell
•    Axis And Occipital Bone (atlas), Baby Skull, Bacteriophage T4, Bacterium
•    Basal Nuclei And Internal Capsule, Bones Of The Foot, Brain With Arteries 2 Parts
•    Brainstem And Nuclei of the Hypothalamus, Cerebellum 2 Parts etc…