|
|
| Home | About Us | What We Offer | Media Gallery | Contact Us | Enquiry |
| What We Offer |
View all our products / services as a slide show.
Play now
| We offer General Laboratory Products Shaking Machines,Centrifuge Machines and Laboratory Equipments. |
|
|
"Teknik" shaking machine rotary (horizontal) :
jeq-5 (b) : continuous shaking of flasks from 100 to 500 ml capacity. Bench type table top model with platform with rubber discs/steel clamps mounted on ball-bearing crank-shafts to give an orbital motion to flasks within a diameter of 2". Motor is coupled with v-belt with a pitch pulley and mounted on heavy angle iron frame. Machine supplied with fixed or variable speed controlled by mechanical speed controller. To work on 220 v ac 50 hz single phase. platform sizes holding capacity h. P. Motor
note : other sizes and capacities can be fabricated on demand. |
|
|
"Teknik" shaking machine wrist action : jeq-5 (a) : heavy cast iron base with sturdy construction with two side arms for holding flasks. A fractional h. P. Heavy duty motor with variable speed through continuously variable speed controller is provided. To hold flasks of capacity 100 to 1000 ml. Complete with cord plug etc. To work on 220 v ac 50 hz single phase. Automatic 0-60 minutes timer.
model to hold 8 flasks. model to hold 16 flasks.
"teknik" shaking machine wrist action & plateform shaker :
|
|
|
|
"TEKNIK" SHAKING MACHINE (Kahn Rack Type) : JEQ-5 (d) iii :Designed for Shaking Kahn racks, bottles or flasks of different sizes by adjusting compartments. Fitted with heavy duty motor. The rate of motion adjustable mechanically by belt tension. Oscillations 280 per minute approximately. To work on 220 V AC 50 Hz single phase with Automatic 0-60 minutes Timer. Platform sizes Body Speed Motor
"TEKNIK" SHAKING MACHINE table model : JEQ-5(d) iv : To hold the sieves eight in number total adjustable to give the spring action shaking with Automatic 0-60 minutes Timer.
|
|
|
"teknik"v. D. R. L. Rotator/shaker : jeq-5 (e) : used for v. D. R. L. And other agglutination tests, blood grouping tests and for mixing of solutions in small flasks, beakers or bottles. Large platform 300x300 mm can take cavity slides, blood bottles, flasks by use of spring holders. It runs at fixed speed of 180 rpm. 60 minutes automatic timer has been provided to control shaking duration. Complete with cord-plug to work on 220 v ac 50 hz single phase. |
|
|
|
JEQ-6 (a): Dome type, sturdy, stable, heavy body with silently mounted motor for vibration-free performance with builtin 5-speed regulator and one non-removeable swingout rotor. Complete with tube carriers. Maximum speed 3500 RPM. Neatly finished in stoving enamel paint.
|
|
|
"TEKNIK" COMPACT LABORATORY CENTRIFUGE : JEQ-6(C) : Compact rectangular body made of mild steel duly powder coated, with clear acrylic lockable lid, continuously variable speed regulator, safety fuse, pilot lamp etc. provided on streamlined panel. With plug-cord to work on 220 V AC 50 Hz single phase. Maximum speed 4000 RPM. A special safety mode is provided that when lid is open instrument will stop working.Capacity (ml.) 4 x 50 6 x 50 8 x 15 12 x 15 16 x 15 Optionals : 1. Automatic 0-60 minutes Timer.2. Speedometer Digital. 3. Maximum speed 10000 can also be provided. |
|
|
|
"Teknik" Vacuum Centrifuge : jeq-6 (v) : Heavy duty motor to work continuous & long time comprising heavy rotor head. Speed controlled by continuous variable speed controller. 1. Vacuum pump capacity 25 litre per hour with 0. 25 h. P. Motor. 2. Equipment to discharge controllable fumes mixed with running water. 3. Provided with ammeter, voltmeter, rpm meter, vacuum pressure controller, vacuum gauge. |
|
|
"TEKNIK" TISSUE HOMEOGENISERS : (Electrical) JEQ-18 :Stainless steel rod with Teflon pastle and replaceable grinding vessel of Borosil glass. Fitted with 1/20 HP motor with 4000 RPM with a speed regulator stirring rod 8 mm x 325 mm long fitted with drill chuck. Unit fitted on heavy cast-iron base. It can be raised and lowered in height. Complete with plug-cord etc. to work on 220 V AC 50 Hz single phase Capacities available : (i) 10ml. (ii) 15ml. (iii) 30ml. (iv) 50ml. (v) 100ml. |
|
|
|
"TEKNIK" Stirrer : JEQ-19 :Designed to meet requirements of laboratories demanding wide flexibility of stirring operations. Shaft upto 6.5 mm dia and 350 mm long with teflon rotar is provided. Fitted with 1/20 HP AC/DC universal motor, speed upto 4000 RPM rotary speed regulated capacity 5-7 liters (depending on viscosity). The total unit can be raised and lowered in height |
|
|
"TEKNIK" Vortex Mixer : JEQ-20 : Adjustable speed, vortex genie short, rapid, accentric stroke motor ribin Neoprene cup imparts vigorous agitation to tubes. With speed control indicator and ON-OFF switch. |
|
|
|
"TEKNIK" MELTING POINT APPARATUS : JEQ-21 : For determination of the melting point upto 3000C with Temperaure controller. Block made of aluminium bored with the dia meter to accept capillary for keeping specimen. |
|
|
"TEKNIK" MELTING POINT APPARATUS Precision / digital : Digital automatic Melting Point Apparatus is designed for quick and accurate detection of melting point. Feature packed & easy to use, this is an indispensable bench top tool.This equipment has an arrangement to hold the capillary containing the sample in uniformly heating media. The temperature is indicated on a digital display readable in 1.0°C. At the point, when the sample melts, the heating is automatically cut-off.Technical Specifications Display Digital 3½ Digit, Bright LED with accuracy 1% Power 230V ± 10% AC, 50 Hz, Accessories Capillary Tube - 100 No., Cleaning Tool - 1 No. |
|
|
|
"TEKNIK" Deonizer : (Ion Exchanger)JDE-01 : The plant consists of One cation Exchanger column containing cation Exchanger Resin. One anion exchanger column containing anion exchanger Resin. Plant is mounted on M.S. stand with assembly of valves and tubing. One conductivity meter with cell to monitor the ionised solids of purified water and thus control the functions of demineralisation. The meter is direct reading having reading heavy range 0.40 microns/cm.a) Cap. or flow rate 30 to 50 It/hr. b) Cap. or flow rate 75 to 100 It/hr. |
|
|
"TEKNIK" SHAKING MACHINE-SIEVES (Rotap type) JEQ-5 (d) ii : For dry sieve tests to carry 7 sieves of 6" or 8" dia. sieves. Driven by 0.25 HP motor through reduction gears. The Gear mechanism runs in a oil-bath. Tapping motion is achieved by hammer from top. To work on 220 V AC 50 Hz single phase. Supplied with adopters for 8" sieves but without sieves with Automatic 0-60 minutes Timer. |
|
|
|
"TEKNIK" REFRIGERATED CENTRIFUGE :
JEQ-6 (D) : Streamlined rectangular body with elegant panel and clear acrylic lockable lid. Complete with pilot lamp, continuously variable speed regulator, Digital speed-indicator, plug-cord to work on 220 V AC 50 Hz single phase. A hermatically sealed compressor for cooling from ambient to -200C. Temperature controlled by Digital Temp. Controller cum Indicator with accuracy ± 0.50C. Maximum speed 5000 RPM. The centrifuge has an electrical interlock to ensure that the unit can not run with cover open. (a) Capacity : 8x15 ml. (b) Capacity : 12x15 ml. (c) Capacity : 16x15 ml. (d) Capacity : 12x1.5 ml. (e) Capacity : 16x1.5 ml. (f) Capacity : 8x50 ml. Note : Use of suitable Voltage stablizer is a must. Optional : Automatic Voltage Stabilizer 2 KVA. |
|
|
"TEKNIK" VACUUM PUMPS ROTARY :
JEQ-10 : Mounted on heavy steel base, oil sealed, heavy duty electric motor, V-belt driven at speed upto 400 RPM, components high grade cast iron are the main features. Supplied in single or double stage models creating maximum vacuum of 0.01 mm of Hg column or 0.001 mm of Hg. column respectively. To work on 220 V AC 50 Hz single phase. Provided with belt gaurd, non return valve and vacuum guage. Capacity Motor (a) 25 lt./mt. 0.25 HP (b) 45 lt./mt. 0.25 HP (c) 75 lt./mt. 0.25 HP (d) 100 lt./mt. 0.50 HP (e) 150 lt./mt. 0.50 HP (f) 200 lt./mt. 1.00 HP Optionals : 1. Air blast 2. Moisture trap 3. High vacuum oil Note : Ask for Oil free Vacuum Pumps. |
|
|
|
"TEKNIK" MAGNETIC STIRRERS :
Compact stirring device utilising a rotating magnetic field by a permanent magnet including variable stirring action. Magnetic field applied from below the container. Stirring is accomplished by a Teflon rotor placed in the liquid to be stirred. Complete with pilot lamp, plug-cord, speed regulator continuously variable, heat control knob, on-off switch. To work on 220 V AC 50 Hz single phase. Models with or without Hot Plate are available : jeq-17 (a) : Magnetic stirrer with Hot Plate Capacity (a) 1 lt. (b) 2 lt. (c) 5 lt. (d) 10 lt. JEQ-17 (b) : Magnetic stirrer without Hot Plate Capacity (a) 1 lt. (b) 2 lt. (c) 5 lt. (d) 10 lt. |
|
|
"Teknik" ir moisture balance :
jir-01 : a basic method for determination of moisture content, measure percent by weighing and drying simultaneously. Infra red radiation are reflected by a bulb and its temperature is controlled by a regulator. the balance scale is divided in terms of moisture content on wet weight basic. Work on 220v 50hz ac mains. specifications:- range : 0-100% accuracy : ±0. 2% weight : 20 kg. sample weight : 5gm, 20gm, 25gm |
|
|
|
"TEKNIK" TLC (THIN LAYER CHROMATOGRAPH) Apparatus : JTL-01 :This unit is based on Desaga German pattern having movable applicator with in built thickness arrangement between 0 to 2mm have the following components :- a) Spreader (Applicator) made of Aluminium / electroplated brass. b) Perspex Base size 114x23cm to support 5 glass plates of size 20 x 20cm and 2 plates of 20x5cm. c) Plate Rack Aluminium for ten 20x20 cm plates. d) Spotting Tern plate perspex. e) Developing tank with lid. f) T.L.C. plates set 20 x 20cm or 20 x 10 cm. g) Micro-pipette. h) Scriber for making lines. i) Glass sprayer with rubber bellow. |
Mr. Vikas Jain
(CEO)
No. 2759, Timber Market
Ambala,
Haryana -
133 001,
India
Telephone:+(91)-(171)-2644991/ 2640855
© Microteknik. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited
|
Business Enquiry Form |
