Clean Air Systems

"TEKNIK" Air Curtains :

JCA-01 invisible air door, keeps interior of a clean room dust-free, stops entry of insects, serves as temperature barrier and isolates heating, cooling & humidity. Fabricated out of mild steel sheet. Balanced blowers are mounted on strong inside metal frame. Exterior finished in enamel or hammertone paint. Wall or roof mountings are provided.

 

Models are available as per door size :

• 2 feet. 

• 2½ feet.

• 3 feet. 

• 4 feet.

•  6 feet.

JCA-03 : Designed to provide protection from biological & particulate contaminations in high traffic areas and entrances of clean air laboratories or rooms.

Outer made of thick CRC sheet duly powder coated. Dynamically balanced blowers with minimum vibration and noise level draw the air and blow it through high efficiency Hepa filters accurate down to 0.3 microns with efficiency of 99.97% bacteria free area.

Automatic actuating air-shower operation, adjustable time-duration of air-showers, recirculation of uncontaminated air, adjustable air-nozzles, clear acrylic door, solid state control system, provision of fluorescent tube lighting are the main technical features.

• Class 10000
• Class 100

Teknik" portable tissue culture rack :

Jca-010 : offering a high quality of tissue culture rack with following features: fabricated out of aluminium square pipe or angle fitted with sturdy castor wheel for smooth shifting movement of the unit, shelves are made of wooden with aluimnium clad or frosted glass. Each shelves has been provided with four fluorescent tubes of 4’size. The unit is workable on 220v ac 50hz single face. Heavy duty electronic chokes have been mounted seperately on each shelf.

Available shelves : 4 shelves, 5 shelves, 6 shelves

photopereodic timer

"TEKNIK" laminar air flow cabinets :

Laminar flow principle involves double filteration of air through coarse Pre-filters (upto 5 microns) and HEPA filters (down to 0.3 microns) for filteration of Biological & Particulate contaminants. A constant uni-directional air flows either Horizontally or Vertically, is drawn from atmosphere and passed through pre and Hepa filters on to the work surface. Fabricated out of reinforced pest and weather resistant Duro-board which is clad in from outside in laminated sheet and inner exposed areas are finished in Epoxy paint. Table top stainless steel sheet. Side panels are fixed and made of clear plexiglass. Front door is folding & made of clear plexiglass.

Prefilters :

DOP tested as per Standard BS:2831 with efficiency 90% down to 5 microns. Made of Washable synthetic material.

Hepa Filters :

Made of Microglass fibre with corrugated aluminium foil separators. DOP tested as per Standard US fed. 209B. Efficiency 99.97% down to 0.3 microns.

Blower Units :

Assembly of AU or equivalent motor workable on 220 V AC 50 Hz single phase, dynamically balanced blowers making the unit least vibrant with minimum noise level.

Lighting : Fluorescent tube lights.

Sterilization : Germicidal Ultra Violet (UV) tube.

manometer :Static pressure thick Acrylic block type.

JCA-07 (Horizontal or Vertical flow)

Working Chamber : 02  03 04 06 08

2x2x2' 3x2x2' 4x2x2' 6x2x2' 8x2x2'

Hepa Filters 1 1 1 2 2

Prefilters 1 1 1 2 2

Illumination 1x20W 1x20W 2x40W 2x40W 2x40W

U.V. 1x15W 1x15W 1x30W 1x30W 2x30W

Optional Accessories (supplied on demand)

(a) Gas Cock-brass chrome plated.

(b) Exhaust system.

(c) Virus burn-out unit.

Spares like Hepa Filters & Pre-filters are also available.

 

K-System :

The K-System encomposses the specialist requirement of ocyte, sperm and embryo handling during ivf/Gift procedures in both animal and human reproduction. The K-system is often built into a Laminar Flow Cabinet. The utensils are warmed by the heating of part of the table plate of the cabinet.

The transmitted light source and the regulation transformer for the stereo microscope are located under the stainless steel table plate, with a window for transmitted light built into the table plate.

ADVANTAGES of the K-System :

1. Maximum working area in Laminar Flow Cabinet.

2. Handling of ocytes and embryos on one level.

3. All ocytes from one patient in one storage tray.

4. Ocytes stored in cabinet untill insemination.

5. Cleaning is easy and sterilization possible.

 

laminar with All Stainless steel body / Sealing / Wall Hanging can also be fabricated :

 

Suitable for Pharmaceutical Industries as per the requirement.

"Teknik" Bio safe biological safety cabinet : Class I

JCA-021 :

Negative pressure is maintained within the cabinet, which is suitable for work where no product protection is required.

These cabinets are self contained 100% exhaust containment enclosures. Air from the work zone passes through a two-stage, high efficiency filter system before being exhausted to the room/atmosphere. These cabinets may be installed on standard laboratory benches or on optional support stands.

Personel and environment protection is provided by inward flow of room air at the work area and high-efficiency particulate air (HEPA) filtration of exhaust air. The inward airflow sweeps aerosols generated during the work process away from the operator into the filter system. A prefilter protects the HEPA filter from large particles, and the HEPA filter removes particulate contaminates down to sub-micron size from the exhaust air.

Supplied complete as above, with cord and plug, suitable to work on 220 volts single phase, 50 Hz, Ac supply.

Available in following sizes :-

Work area 4’x2’x2' 6’x2’x2

"TEKNIK" Garment Storage Cabinet

JCA-031 :Self standing providing down flow clean air to clean room Garments. Recommended in change rooms. Suitable for Pharmaceutical, Hospital and O/T, Electronic Industry etc. Supplied complete with HEPA & Pre filter, Motor Blower. Static Pressure Manometer & Built in U.V. Germicidal Light.

Model 03 04

Working Area 3’x2’x5' 4’x2’x5'

Size of HEPA filter 3'x1.5’x6" 4’x1.5’x6"

No. of HEPA filter 1 1

(Supplied with Pre filters)

Optional Accessories :-

• Exhaust Ducting per running feet.

"TEKNIK" Sterile Material Storage Cabinet : (Vertical Flow)

JCA-041 :Self standing, down flow clean air cabinet for use in clean rooms for storage of materials. Suitable for Pharmaceuticals, Hospitals and O/T, Electronic Industry etc. Supplied complete with HEPA & Pre Filter, Motor Blower, Shelves. Static Pressure Manometer & Built in U.V. Germicidal Light

Model 03 04

Working Area 3'x2’x5' 4’x2’x5'

Size of HEPA Filter 3’x1.5’x6" 4’x1.5’x6"

No. of HEPA Filter 1 1

No. of Shelves 2 2

(Supplied with Pre filters)

Optional Accessories :-

• Exhaust Ducting per running feet.

• Extra Shelves

"TEKNIK" Inoculation Hood

JCA-06A :

Fabricated out of pest and weather resistant Duro-board or mild steel sheet. Wood construction clad in laminated sheet from outside and inner exposed parts painted with Epoxy paint. The mild steel model is enamel painted.

Provided with rectangular, tight coverable opening on one side for putting the material in the chamber and two coverable round openings in front for handling of the material. A clear Acrylic fixed window in front provided for observation.

Complete with fluorescent lighting and germicidal Ultra Violet (UV) tube.

Chamber Sizes :

(i) 40 x 24 x 20" (ii) 27 x 20 x 16"

"TEKNIK" dehumidifiers :

JCA-08 :Designed to remove excess moisture from atmosphere when manufacturing activities of tablets, capsules and air accuracy is required. Humidity can be brought down to 30% RH with accuracy of ±3% RH.

Capacity :

(i) 1 Ton. (ii) 1.5 Ton. (iii) 2 Ton. (iv) 3 Ton.

"TEKNIK" Fume Hoods :
JCA-05 : Fume exhaust hoods are designed to contain and exhaust toxic, obnoxious, pungent smelling gasses to protect personnel and equipment in the laboratories. The "TEKNIK" Fume Hood comprise with international standard on fume handling systems. A motor driven dynamically balanced blower with minimal vibration and noise level creates negetive pressure and sucks contaminated air from work area and throws the same in high-up atmosphere through ductings.
Fabricated out of thick Duro-board clad from outside in laminated sheet and inside finished in non-corrosive, chemical resistant Epoxy paint. An up & down sliding Sash made of Teakwood mounted in thick glass sheet and workable on weights & pulleys system counter balanced is provided. Fluorescent lighting is provided in the chamber. A gas tap and electric power plug also provided in addition to stainless steel wash basin and suitable water tap. A work-bench with cupboard is provided to hold the hood at suitable level from ground.
    (i)    Chamber : 4x2x2'   
    (ii)    Chamber : 6x2x2'
    (iii)    Chamber : 8x3x3'

"TEKNIK" Tissue Culture Hood :

Jca-06 : Elegant equipment with overall dimensions 1220 x 610 x 610 mm having front horizontal swing door opening of 1050 x 405 mm (frame) fitted with transparent plexiglass. Complete with fluorescent lighting and germicidal ultra violet tube.

We are one of the recognized names engaged in manufacturing Aseptic Cabinet. Fitted with transparent plexiglass and having front horizontal swing door opening of 1050 x 405 mm (frame), this elegant equipment is available with overall dimensions 1220 x 610 x 610. Moreover, this equipment is completed with germicidal ultra violet tube and fluorescent lighting.

 

Features:

 

• High performance
• Durable
• Reliable functioning