New Items

Product Details:

DRAINAGE & SEEPAGE TANK APPARATUS

CODE: MTK-9745DS

Specification:

·       The present set-up is designed to study the flow through permeable media. This apparatus consists of a tank whose bed is made from Stainless Steel. The sides of the tanks are supported and sealed so that it allows free access to the interior. One side of the tank is of Toughened glass to give good scratch free visibility over a long period of use and minimum sight obstruction. Second side is of Stainless Steel and required pressure tapings are mounted on the same. The tank has two adjustable overflows close to each end so that constant head of water can be maintained in each half of the tank. These may be lowered to a position close to the bed of the tank for some experiments to provide sub soil drainage. Present set-up is self-contained water circulating unit with sump tank, Pump, flow control valve etc.

Product Specification

·       Drainage or Seepage Tank: Length 1500 mm Width 100 mm

·       Tank Base: Stainless Steel or Aluminum

·       Front Side: Toughened Glass (Front Side)

·       Back Side: Stainless Steel

·       Sump Tank: Stainless Steel, Capacity 100 Ltrs.

·       Pump: FHP Pump, Crompton Make.

Additional Information:

• Item Code: MTK-9745DS
• Production Capacity: 6
• Delivery Time: 1 WEEK

Product Details:

KINETIC OF DISSOLUTION OF BENZOIC ACID APPARATUS

CODE: MTK-9832KD

Specification:

Description

·       The setup consists of a Reactor in which solid cylinder of Benzoic Acid is placed and water is stirred by means of a variable speed mixer. Baffles are also provided. The Reactor is made of Stainless Steel. A Peltilizer is provided to make the solid cylinder of size 1" diameter and 2" height of Benzoic Acid.

Experimentation/Learning Objectives

•      To study the Kinetics of dissolution of Benzoic Acid.

Utilities Required

•      Electricity Supply: Single Phase, 220 V AC, 50 Hz, 5-15 Amp combined socket with earth connection. Earth voltage should be less than 5 volts.

•      Water Supply.

•      Floor Drain.

•      Floor Area Required: 1.0 m x 0.5 m.

•      Instruments, Laboratory Glassware and Chemicals required for analysis as per the system adopted.

 

Technical Details

·       Chamber: Material Stainless Steel, Capacity 1 Ltrs. (approx.)

•      Peltilizer: 1" Diameter, 2" Height (approx.). with spanner (compatible size)

•      Stirrer: Material Stainless Steel Impeller and shaft coupled with FHP motor

•      Control panel comprises of: Standard make on/off switch, Mains Indicator etc.

Additional Information:

• Item Code: MTK-9832KD
• Production Capacity: 6
• Delivery Time: 1 WEEK

Product Details:

EMULSION POLYMERIZATION SET-UP APPARATUS

CODE: MTK-9877EP

Specification:

·        The set-up is used to carry out the emulsion polymerization involving the polymerization of an unsaturated monomer like Styrene. The emulsion is of the type: oil in water, the monomer is oil soluble & the initiator is water-soluble & an emulsifier is used to create a stable emulsion. Apparatus can be used to generate the kinetic data for emulsion polymerization under various operating conditions like temperature, emulsifier concentration, etc. Polymerization is carried out under the atmosphere of air-free nitrogen. The set-up consists of a jacketed type SS reactor fitted with a variable speed agitator & baffles. Hot water from a digitally controlled water bath is circulated in the jacket using a pump. Metered quantity of nitrogen gas from a cylinder passes through a de-oxygenation column & allowed to enter the reactor. Air has to be evacuated using a vacuum pump to create a vacuum of up to 30mm of Hg before passing the nitrogen supply. Initiator from the reservoir is supplied to the reactor under pressure. Set-up is complete & self-contained with sampling ports

Experimentation/Learning Objectives:

The parameter studies are conducted involving studies of

•       Effect of RPM on conversion.

•       Effect of Initiator concentration.

•       Effect of monomer concentration

•       Effect of emulsifier concentration.

Additional Information:

• Item Code: MTK-9877EP
• Production Capacity: 3
• Delivery Time: 1 WEEK

Product Details:

R.T.D. STUDIES IN PACKED BED REACTOR APPARATUS

CODE: MTK-9814BR

Specification:

·       Axial diffusion and dispersion of fluid in packed beds are important for design and operation of separation equipment and Chemicals reactors. The tracer technique, the most widely used method for the study of axial dispersion. In stimulus response experimentation, we perturb the system using pulse input of tracer and then see how the system reacts or responds to this stimulus. The analysis of the response gives the desired information about the system. The setup consists of a glass column packed with Rasching Rings and one feed tank. Water is fed to the reactor through liquid distributor, fitted at the bottom of the column. Rotameter is provided to measure the flow of water. The flow rate can be adjusted by operating the needle valve provided on Rotameter. For understanding the R.T.D. characteristics, a special arrangement to inject tracer into the lower end of reactor, using a syringe, is provided. Samples can be taken periodically from the top outlet of reactor. Pressure Regulator & Pressure Gauge are fitted in the compressed air line.

Experimentation/Learning Objectives

•      To plot RTD curve for Packed Bed Reactor.

•      To determine the Dispersion No.

Utilities Required

•      Compressed Air Supply: 0.25 CFM@1 bar

•      Water Supply.

•      Floor Drain.

•      Floor Area Required: 1.0 m x 1.0 m.

•      Instruments, Laboratory Glassware and Chemicals required for analysis as per the system adopted.

Technical Details

•      Reactor Column: Material Borosilicate Glass

•      Packing: Rasching Rings, Material Borosilicate Glass. Size 8-10mm (approx.)

•      Feed Tank: Material Stainless Steel, Capacity 20 Ltrs.

•      Feed Circulation: By compressed air.

•      Flow Measurement: Rotameter.

•      Piping: Stainless Steel and PU pipe.

•      Pressure Regulator: 0-2 Kg/cm2

•      Pressure Gauge: Bourdon type 0-2 Kg/cm2

•      Stop Watch: Electronic

•      Arrangement is done to inject tracer into the lower end of reactor

 

Additional Information:

• Item Code: MTK-9814BR
• Production Capacity: 3
• Delivery Time: 1 week

Product Details:

MicroTeknik Scientific modeling, the generation of a physical, conceptual, or mathematical representation of a real phenomenon that is difficult to observe directly. Our scientific models are used to explain and predict the behaviour of real objects or systems and are used in a variety of scientific disciplines, ranging from physics and chemistry to ecology and the Earth sciences. Although modeling is a central component of modern science, scientific models at best are approximations of the objects and systems that they represent—they are not exact replicas. Thus, Our R&D scientists constantly are working to improve and refine models.

Product Details:

CALANDRIA EVAPORATOR APPARATUS

CODE: MTK- 10841CE

Specification:

·         The present set-up is designed to study the operation of Calandria evaporator. It consists of a short tube vertical evaporator in which tubes are surrounded by a Stainless Steel jacket and fitted with accumulator. Dilute solution is fed to the evaporator and heated by Steam from a steam generator to concentrate the dilute feed solution to a desired level. The jacket is fitted with a steam trap and the condensate is collected at the end of trap. The vapors of volatile solvent are condensed in a shell & tube type condenser and the balance non-volatile solute collected in the accumulator recycled back to the evaporator.

Experimentation/Learning Objectives

To concentrate a solution and to evaluate the following at steady state:

·        Material and Heat Balance.

·        Economy and the capacity of the evaporator.

·        Overall heat transfer co-efficient.

Utilities Required

·        Electricity Supply: 1 Phase, 220 V AC, 50 Hz, 32 amp MCB with earth connection (Earth voltage should be less than 5 volts)

·        Water Supply: Initial fill and floor drain.

·        Floor area: 1.5 m x 1.0 m.

·        Chemicals: Sodium carbonate & distilled water.

Additional Information:

• Item Code: MTK-10841CE
• Production Capacity: 10
• Delivery Time: 3 WEEK

Product Details:

 

PLATE TYPE HEAT EXCHANGER APPARATUS

CODE: MTK- 10541P

Specification:

·       Heat Exchanger- S.S. Plate heat exchanger wiles nos. of 200 X 400mm. 

·       Calibrated water flow measuring vessel

·       Thermometers to measure inlet and outlet temperatures of fluid.

·       Flow controls valves.

·       A technical manual accompanies the unit.

Optional Accessories

·       Rotameters to measure water flow rates instead of measuring vessel.

·       Multi-channel digital temperature Indicator to measure the temperatures instead of thermometers.

 

 

Additional Information:

• Item Code: MTK-10541P
• Production Capacity: 6
• Delivery Time: 2 WEEK

Product Details:

CHEMICAL REACTOR SERVICE UNIT APPARATUS

CODE: MTK-9823CRS

Specification:

Description

·       This set-up is designed to conduct experiments on different types of chemical reactors on the same service unit. Different types of reactors i.e. continuously Stirred Tank Reactor (CSTR), Plug Flow Tubular Reactor (Coiled Tube Type) and Batch Reactor (which will be supplied on extra cost) as separate units can be installed on the service unit individually one at a time for conducting experiments. Basically, this range of small-scale chemical reactors represents the most common types of chemical reactor found in industry. The reactors use the saponification reaction between ethyl acetate and sodium hydroxide. This provides a well-understood and safe reaction for the students to investigate the different reactor types. Each reactor, mounted on a base plate can be attached to the service unit. The appropriate services such as feed circulation, instrumentation for and temperature measurement are connected to the reactor, and it then becomes operational. This service unit comprises feed tanks, rotameters for flow measurement of reactant etc. Compressed air is used for feed circulation. These all things are mounted on a compact and well-designed base for bench mounting. This is self-contained bench top service unit to accommodate the reactors, one at a time, for conducting experiments on the same unit.

 

Utilities Required

•       Electricity Supply: Single Phase, 220 V AC, 50 Hz, 5-15 Amp combined socket with earth connection. Earth voltage should be less than 5 volts.

•       Compressed Air Supply: 2 CFM@1 bar

•       Water Supply.

•       Floor Drain.

•       Floor Area: 2.0 m x 1.0 m

•       Instruments, Laboratory Glassware and Chemicals required for analysis as per the system adopted.

Technical Details

•       Feed Tanks: 2Nos. (One each for each reactant)

•       Material: Stainless Steel

•       Capacity: 5 Ltrs. Each.

•       Feed Circulation: By compressed air

•       Temperature Controller: PID Controller, 0-199.9ºC

•       Heater: Nichrome wire Heater.

•       Hot water Circulator: With water tank and pump to circulate water.

•       Temperature Sensor: RTD PT-100 Type.

•       Piping: Stainless steel & PU pipe.

•       Control panel comprises of: With Standard make on/off switch, Mains Indicator etc.

•       An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus.

•       The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint

Additional Information:

• Item Code: MTK-9823CRS
• Production Capacity: 2
• Delivery Time: 1 week

Product Details:

Burette modular PTFE Key stopcock

 

Burette modular, PTFE Key stopcock class A complies with BS 846

Product Details:

SHELL & TUBE HEAT EXCHANGER APPARATUS

CODE: MTK- 101365

Specification:

·        We at Engineering Laboratory Equipment’s has a vision to develop & design Shell Tube Heat Exchanger so as to meet the customer’s requirement through continual endeavor & innovation. Our company is well managed with a team of highly qualified personnel with an experience of more than two decades and active involvements in foreign business to develop.

·        Shell and Tube Heat Exchanger are popular in industries because they occupy less space and offer reasonable temperature drop. The apparatus consists of fabricated SS shell, inside which copper tubes with baffles on outer side are fitted. This is two-pass heat exchanger so that hot water passes to one end of shell through the tubes and returns to another end through remaining tubes. The cold water is admitted at the one end of shell, which passes over the hot-water tubes. Valves are provided to control the flow rates of hot and cold water. Flow rates of hot and cold water are measured using Rotameters. A magnetic drive pump is used to circulate the hot water from a re-cycled type water tank, which is fitted with heaters and Digital Temperature Controller.

Experiments

·        The main object of the experimental setup is to study the following at various flow rates

·        Heat transfer rate

·        Overall Heat Transfer Co-efficient

Utilities Required

·        Water supply 20 lit/min (approx.) and drain

·        Electricity Supply: I Phase, 220 V AC, 4 kW

·        Floor area of 1.5m x 0.75 m

Additional Information:

• Item Code: MTK-101365
• Production Capacity: 20
• Delivery Time: 20 days

Product Details:

JACKETED VESSEL WITH COIL & STIRRER APPARATUS 

CODE: MTK- 10214CS

Specification:

·       The apparatus is used for studying heat transfer with either an external jacket or an internal coil under batch wise or continuous feed conditions.

·       The unit consists of a jacketed vessel with a coil and stirrer and a service module. The module comprises a hot water tank with a transfer pump and instruments for monitoring and control. Parallel or counter flow or changing from jacked vessel to coil and stirrer may be done by rearranging flexible hoses.

·       A cold fluid in a vessel is heated by a hot fluid in the jacket or in the coil. An adjustable speed a stirrer and baffles are provided to allow thorough mixing of the vessel contents. The content volume in the vessel can be varied by an adjustable height overflow pipe. The unit requires outside water supply. Instruction manual is also included.

TYPICAL EXPERIMENTS

·       Demonstration of heat transfer for jacketed vessel with or without stirrer both continuous and batch types.

·       Demonstration of heat transfer for heating coil with or without stirrer.

·       Determination of heat transfer coefficient.

·       Effects of flow rate and temperature difference.

·       Effect of vessel content.

 

Additional Information:

• Item Code: MTK-10214CS
• Production Capacity: 5
• Delivery Time: 2 WEEK

Product Details:

ISOTHERMAL SEMI-BATCH REACTOR APPARATUS

CODE: MTK-9858SBI

Specification:

DESCRIPTION:

·       A isothermal semi-batch reactor is a semi-closed system with one input stream. It is operated under conditions like Isothermal (Temperature of Reaction Mass remains constant) and perfectly mixed (composition of reaction mixture is uniform throughout). This set-up is used to study a non-catalytic homogeneous reaction under isothermal condition. The set up consists of a Reactor fitted in a constant temperature water bath. Before starting the reaction the reactor is charged with measured quantity of one reactant. From a feed tank another reactant is fed to the reactor. Using a sampling pipette samples can be taken out for analysis after fixed interval. Peristaltic Pumps are provided to measure the individual flow of Chemicals. One stirrer is fitted for mixing the reactants in reactor and other is fitted in water bath to keep the uniform temperature throughout in the bath. The temperature of bath can be maintained from ambient to 70C with the help of Digital Temperature indicator Cum Controller.

EXPERIMENTATION:

·        To study a second order saponification reaction in a Semi-Batch Reactor.

·        To determine the Reaction Rate Constant.

Product Details:

·        Voltage: 220 Volt (v)

·        Power: 500 Watt (w)

·        Material: Metal

·        Usage: For Laboratory

·        Equipment Materials: SS

Additional Information:

• Item Code: MTK-9858SBI
• Production Capacity: 4
• Delivery Time: 2 WEEKS

Product Details:

PACKED BED REACTOR APPARATUS

CODE: MTK-9854BD

Specification:

·       The setup consists of a glass column packed with Rasching Rings and two feed tanks. Reactants are fed to the reactor through liquid distributor, fitted at the bottom of the column. Rotameters are provided to measure the individual flow of Chemicals. The flow rate can be adjusted by operating the needle valves provided on respective Rotameter. The compressed air is used for circulation of feed. Samples can be taken periodically from the top outlet of reactor. Pressure Regulator &Pressure Gauge are fitted in the compressed air line.

Product Specification

·        Reactor Column: Material Borosilicate Glass Volume 1.2 Ltrs. (Approx.)

·        Packing: Rasching Rings, Material Borosilicate Glass. Size 6-8 mm (approx.)

·        Feed Tank: Material Stainless Steel, Capacity 20 Ltrs.

·        Feed Circulation: By compressed air

·        Flow Measurement: Rotameter 2Nos. (One each for Reactants).

·        Piping: Stainless Steel and PU Pipe

Additional Information:

• Item Code: MTK-9854BD
• Production Capacity: 3
• Delivery Time: 2 WEEKS

Product Details:

R.T.D. STUDIES IN PLUG FLOW TUBULAR REACTOR (STRAIGHT TUBE TYPE) APPARATUS

CODE: MTK-9588ST

Specification:

DESCRIPTION:

·       Real reactors do not satisfy the idealized flow patterns, back mix flow or plug flow deviation from ideality can be due to channeling of fluid through the vessel, recycling of fluid within the vessel or due to the presence of stagnant region or pockets of fluid in the vessel. To predict the exact behavior of a vessel as a Chemicals reactor, RTD or stimulus response technique is used. The set up consists of one overhead feed tank through which water is fed to the reactor. Rotameter is provided to measure flow of water. The flow rate can be adjusted by operating the needle valve provided on rotameter. A straight tube type reactor kept horizontally and inclined upward at outlet from where samples are collected for analysis. For understanding the R.T.D. characteristics, a special arrangement to inject tracer into the lower end of reactor, using a syringe is provided.

EXPERIMENATION:

·       To plot RTD curve for Plug Flow Reactor.

·       To determine the Dispersion No.

Product Specifications

·       Material: Metal

·       Usage: Laboratory Machine

·       Operate Method: Manual

·       Equipment Materials: SS

 

 

Additional Information:

• Item Code: MTK-9588ST
• Production Capacity: 4
• Delivery Time: 1 week

Product Details:

CONTINUOUS STIRRED TANK REACTOR (C.S.T.R.) APPARATUS

CODE: - MTK-9545CS

Specification:

·      Provided to measure the individual flow of Chemicals. The flow rate can be adjusted by operating the needle valves provided on respective Rota meter. The compressed air is used for circulation of feed. The CSTR is fitted with stirrer for proper mixing. From top outlet of it samples are collected for analysis. Pressure Regulator, Pressure Gauge and Safety Valve are fitted in the compressed air line.

Learning Objectives/Experiments:

·        To study the progress of a suitable Chemical Reaction CSTR.

·        To determine the Reaction Rate Constant.

Required for Operation:

·        Compressed Air Supply at 1 HP, 2 CFM.

·        Water Supply.

·        Drain.

·        Electricity Supply: 1 Phase, 220 V AC, 0.5 kW.

·        Instruments, Laboratory Glassware and Chemicals required for analysis as per the system adopted.

Control Panel:

·        Standard make on off switch, Mains Indicator etc.

 

Additional Information:

• Item Code: MTK-9545CS
• Production Capacity: 5
• Delivery Time: 2 WEEK

Product Details:

ISOTHERMAL BATCH REACTOR APPARATUS

MTK-9857BI

Specification:

Description:

·      A batch reactor is a closed system with no input and output streams. A batch reactor can operate under conditions like Isothermal (Temperature of Reaction Mass remains constant), perfectly mixed (composition of reaction mixture is uniform throughout), and constant volume (volume of the reaction mixture within the reactor remains constant, there is no appreciable change in the density of reaction mass). This set-up is used to study a non-catalytic homogeneous reaction under isothermal condition. The set up consists of a Reactor fitted in a constant temperature water bath. One stirrer is fitted for mixing the reactants in reactor and other is fitted in water bath to keep the uniform temperature throughout in the bath. The temperature of bath can be maintained from ambient to 90C with the help of Digital Temperature indicator Cum Controller. Samples can be taken out with the help of a sampling pipette.

 

EXPERIMENTATION:

·      To study the progress of a Chemicals reaction and determine the kinetic parameters.

·      To determine the effect of temperature on Reaction Rate Constant.

Product Details:

·      Power: 500 Watt (w)

·      Voltage: 9 240 Volt (v)

·      Material: Metal

·      Usage: Laboratory

·      Equipment Materials: SS

Additional Information:

• Item Code: MTK-9857BI
• Production Capacity: 3
• Delivery Time: 2 WEEKS

Product Details:

 

UV-PHOTO REACTOR APPARATUS

CODE: MTK-9868UV

Specification:

Description

·      The set-up is used to study a photo catalytic reaction using a UV source provided in the form of an UV tube. This set-up can be used to carry out a parameter study under batch/continuous flow condition. A photo catalyst like TiO2 can be used. This set-up can also be used to study the mineralization of liquid effluent industrial streams & for purification of water. The set-up consists of reactor with inside reflecting surface. An UV source surrounding glass/quartz cylinder is placed centrally in the reactor

Utilities Required

•      Electricity Supply: Single Phase, 220 V AC, 50 Hz, 5-15 Amp combined socket with earth connection. Earth voltage should be less than 5 volts.

•      Water Supply

•      Floor Drain.

•      Instruments, Laboratory wares and Chemicals required for analysis as per the system adopted

 

 

Technical Details

·       UV Source: 30 W / 16 W

•      Reactor: With inside reflective surface. Effective volume of reactor 1-1.5 Ltrs.

•     Feed Tank: Material Stainless Steel, Capacity 5 Ltrs.

•     Feed circulation: Magnetic Pump made of Polypropylene. Maximum working temperature 80°C.

•     Flow Measurement: By Rotameter

 

 

Additional Information:

• Item Code: MTK-9868UV
• Production Capacity: 6
• Delivery Time: 2 WEEKS

Product Details:

MODEL SEDIMENTATION TANK

CODE: MTK-9747MS

Specification:

·       The apparatus is designed to demonstrate the hydraulic characteristics and settling efficiencies of a model settling basin. The apparatus consists of a Sedimentation Tank in which the water is fed by overhead tank (available in user laboratory and not in scope of supply) at constant flow rate and is measured with the help of a Rotameter. A complete unit for slurry circulation in sedimentation tank also accompanies the set-up including a sump tank for slurry, a feed pump for slurry. Flow rate of slurry entering the sedimentation tank is metered by suitable device.

·       An accurate dye injection system is provided to inject the known volume of dye in the sedimentation tank. In sedimentation tank a weir is fitted which facilitate to the entry of well mixed slurry of known concentration in sedimentation tank uniformly.

Product Specification

·       Material: pvc/ss

·       Type of Service Contract: Project Based

·       Dimension: 6X4X5 FEET

·       Usage/Application: LAB EXPERIMENT

·       Current: 220V

·       Cylinder: NA

Additional Information:

• Item Code: MTK-9747MS
• Production Capacity: 6
• Delivery Time: 2 WEEKS

Product Details:

AERATION UNIT APPARATUS

CODE: MTK-5522AU

Specification:

·       The set-up consists of an open water tank with variable speed paddle mixer. Air is supplied to the water from the bottom and mixed in the water by operating stirrer. Speed of the stirrer can be controlled with the help of speed controlled provided in the Panel. Flow of air entering in the water tank is directly metered with the help of Rotameter and can be regulated by means of Valve provided in the set-up. Three air diffusers of different types are provided with the set-up and are interchangeable. Desired diffuser can be easily installed on the air inlet to the water tank. A Temperature Indicator is also provided which gives the direct reading of water temperature. The present set-up is complete in all respect to demonstrate the oxygen transfer characteristics of diffused air system. A battery powered Dissolved Oxygen Meter accompanies the apparatus which allows to conduct the experiment with ease

Product Specification

·       Capacity: 25 ltr

·       Type: NA

·       Power: 220V AC 1 PHASE

·       Application: LAB EXPERIMENT

·       Country of Origin: Made in India

Additional Information:

• Item Code: MTK-5522AU
• Production Capacity: 6
• Delivery Time: 2 WEEKS

Product Details:

ADIABATIC BATCH REACTOR APPARATUS

CODE: MTK-9820ABR

Specification:

·       An adiabatic batch reactor is a closed system with no input and output streams. This reactor is operated under conditions like adiabatic (Temperature of Reaction Mass keep on changing), perfectly mixed (composition of the reaction mixture is uniform throughout), and constant volume (volume of the reaction mixture within the reactor remains constant, there is no appreciable change in the density of reaction mass). This setup is used to study a catalytic homogeneous reaction under adiabatic conditions. The set-up consists of a Dewar flask of a capacity of 1 lit. Fitted with a stirrer. The flask is double insulated by ceramic wool insulation. Temp. is measured by a digital temp indicator. The whole setup is mounted on a rigid M.S. frame.

Experimentation/Learning Objectives

•      To study the decomposition of Hydrogen Peroxide with water in presence of an Iodide catalyst.

•      To predict the degree of conversion from time-temperature data

Utilities Required

·       Hz, 5-15 Amp combined socket with earth connection. Earth voltage should be less than 5 volts.

•      Floor Area Required: 1.0 m x 1.0 m.

•      Instruments, Laboratory Glassware, and Chemicals required for analysis as per the system adopted.

Product Specification

·       Material: Stainless Steel

·       Capacity: 1 litre

·       Country of Origin: Made in India

·       Temp. Indicator: Digital

·       Floor Area Required: 1.0 m x 1.0 m

Additional Information:

• Item Code: MTK-9820ABR
• Production Capacity: 3
• Delivery Time: 1 week

Product Details:

SPIN INNING BASKET REACTOR APPARATUS
CODE: MTK-9809SP

 

 

 

 

 

 

 

Specification:

Description

·       Any catalytic liquid-liquid or liquid-gas reaction involving the use of a catalyst placed in basket can be studies in this set-up. Kinetic parameter of a specific reaction can be estimated & parametric studies can be conducted. The set-up consists of a reactor centrally having one spinning basket derived through a variable speed motor. The metered flow of reactant from feed tank is fed to the reactor at the bottom. The set-up can be used as batch wise of as continuous type. Sampling points are provided for analysis. Port connection for gas inlet is provided at the bottom of the reactor

Experimentation/Learning Objectives

•       To determine the kinetic parameters for a given reaction

Utilities Required

•       Electricity Supply: Single Phase, 220 V AC, 50 Hz, 5-15 Amp combined socket with earth connection. Earth voltage should be less than 5 volts.

•       Compressed air supply@1 Bar.

•       Water Supply.

•       Floor Drain.

•       Floor Area Required: 1.0 m x 0.75 m.

•       Instruments, Laboratory Glassware and Chemicals required for analysis as per the system adopted

Technical Details

·       Reactor Vessel: Material Stainless Steel Effective Volume: 1000 ml.

•       Basket: Material Stainless Steel, Fitted with appropriate Stainless Steel.

•       Drive for Basket: DC Motor with Thyristor controlled DC Drive for Variable Speed.

•       Packing: Catalyst

•       Feed Tank (1Nos.): Material Stainless Steel, Capacity 10 Ltrs.

•       Flow Measurement: By Rotameter

•       Pressure regulator: Range 0-2 kg/cm²

•       Pressure Gauge: Bourdon Type, 0-2 kg/cm²

•       Receiver: Material Stainless Steel, Capacity 10 Ltrs.

•       Piping: Stainless Steel and PVC.

•       Hot water Circulation: Magnetic Pump of Poly propylene (in outer Jacket) to circulate Hot Water maximum working temp. 85°C

•       Hot water tank: Made of Stainless Steel, Double wall, insulated with Ceramic Wool. Capacity: 10-15 ltrs.

Product Details:

ISOTHERMAL CONTINUOUS STIRRED TANK REACTOR (C.S.T.R.) APPARATUS

MODEL NO: - MTK- 9547CIS

Specification:

DESCRIPTION:

·        In an ideal CSTR (i.e. an ideal steady state flow reactor) the contents in reactor are well mixed and have uniform composition throughout. Thus the exit stream has the same composition as the fluid within the reactor. This type of reactor is known as mixed flow reactor. This set-up is used to study a non-catalytic homogeneous second order liquid phase reaction under isothermal condition. The set up consists of two feed tanks through which two reactants are fed to the reactor. The flow rate can be varied by changing the speed of peristaltic pump. The CSTR is fitted with stirrer for proper mixing. From top outlet of it samples are collected for analysis. Constant temperature water bath arrangement is provided to conduct the experiment at various temperatures.

EXPERIMENTATION:

·        Saponification Reaction study in Isothermal CSTR.

·        To determine the Reaction Rate Constant and effect of temperature on it.

Product Details:

·        Voltage: 220 Volt (v)

·        Usage: Laboratory

·        Material: Metal

·        Equipment Materials: SS

·        Temperature Range: 30 Celsius (DEGREE C)

·        Display Type: Digital

 

Additional Information:

• Item Code: MTK-9547CIS
• Production Capacity: 3
• Delivery Time: 2 WEEK