Clean Air Systems and Blood Banking Products

JCA-01 : Invisible air door, keeps interior of a clean room dust-free, stops entry of insects, serves as temperature barrier and isolates heating, cooling & humidity. Fabricated out of mild steel sheet. Balanced blowers are mounted on strong inside metal frame. Exterior finished in enamel or hammertone paint. Wall or roof mountings are provided. Models are available as per door size :

(i)     2 feet.
(ii)    21/2 feet,
(iii)    3 feet.
(iv)   4 feet,
(v)    6 feet.

JCA-03 : Designed to provide protection from Biological & Particulate contaminations in high traffic areas and entrances of clean Air Laboratories or rooms.

Outer made of thick CRC sheet duly powder coated. Dynamically balanced blowers with minimum vibration and noise level draw the air and blow it through High Efficiency Hepa filters accurate down to 0.3 microns with efficiency of 99.97% bacteria free area.

Automatic actuating air-shower operation, adjustable time-duration of air-showers, recirculation of uncontaminated air, adjustable air-nozzles, clear acrylic door, solid state control system, provision of fluorescent tube lighting are the main technical features.

(i) Class 10000
(ii)   Class 100

JCA-05 : Fume exhaust hoods are designed to contain and exhaust toxic, obnoxious, pungent smelling gasses to protect personnel and equipment in the laboratories. The "TEKNIK" Fume Hood comprise with international standard on fume handling systems. A motor driven dynamically balanced blower with minimal vibration and noise level creates negetive pressure and sucks contaminated air from work area and throws the same in high-up atmosphere through ductings.
Fabricated out of thick Duro-board clad from outside in laminated sheet and inside finished in non-corrosive, chemical resistant Epoxy paint. An up & down sliding Sash made of Teakwood mounted in thick glass sheet and workable on weights & pulleys system counter balanced is provided. Fluorescent lighting is provided in the chamber. A gas tap and electric power plug also provided in addition to stainless steel wash basin and suitable water tap. A work-bench with cupboard is provided to hold the hood at suitable level from ground.

(i) Chamber: 4x2x2'
(ii) Chamber: 6x2x2'
(iii) Chamber: 8x3x3'

JRS-B1 : To seal the tube of blood bag containing blood without causing Haemolysis, leakage of blood and able to separate by pulling. Accepts tube of maximum diameter of 6 mm for sealing. Very compact design and has lightweight model & Protection against electrical shock.

Sealing operation is activated automatically when the tube is based in between the electrodes. Electrodes are made from high grade metal for perfect sealing. Caps provided in front of electrodes are removable, so it is easy to clean.
LEDs are provided for indications of:

• Power
• Ready
• Seal.
• Ground